-
Match the complete marking
Include IS200WETBH1BAA and the visible FA/00 marking on your enquiry. Compare the complete PCB identification with the installed board and approved equipment record.
-
Check the offered item before ordering
Request current front, rear and connector photographs of IS200WETBH1BAA. Confirm the harness and board revision against the installed assembly before approving the quotation.
Technical specifications for IS200WETBH1BAA
-
Manufacturer:General Electric
-
Product Category:General Automation
-
Spare Part Number:IS200WETBH1BAA
-
Weight:0.84 kg
-
Tariff Code:8537101190
-
Visible revision:FA/00
-
Upper connector IDs:J2A, J20 and J6
-
Lower connector IDs:J11, J12 and J13
-
Fuse position IDs:FU1, FU6, FU7 and FU8
-
Switching hardware:Board-mounted electromechanical relays
-
Magnetic hardware:Board-mounted transformer
Information
- Its connector groups route the assembly into the surrounding engineered equipment. The face photograph shows J-designated plug points and board-mounted protection devices, but the image alone does not establish electrical ratings or a universal pin assignment.
Physical interface: Keyed multi-plug assembly
Protection review: Fuse and relay circuits require host drawings
Its connector groups route the assembly into the surrounding engineered equipment. The face photograph shows J-designated plug points and board-mounted protection devices, but the image alone does not establish electrical ratings or a universal pin assignment.
For replacement, use the complete board marking and FA/00 identification to compare the installed board, connected harnesses and project wiring. Confirm the host enclosure and commissioning procedure before energizing the replacement.
-
GE IS200WETBH1BAA technical reference
2-page reference on the photographed board identity, visible components and integration checks. -
GE IS200WETBH1BAA installation verification guide
1-page engineering guide for board identification, connector review and commissioning records.
Harness compatibility: Connector positions and relay/fuse circuit assignments follow the host wiring design.
-
Installed WETB assembly
Use where the machine drawings call for the IS200WETBH1BAA board execution. -
Harness interface
Compare each mating plug position and keying with the removed unit. -
Relay and fuse circuits
Review the site circuit drawings for the load and protection roles of the visible devices. -
Maintenance replacement
Transfer only approved connections after matching the board revision and enclosure configuration.
Photograph the front face and all harness labels before disconnecting.
Match IS200WETBH1BAA and the visible FA/00 marking to the installed record.
Use project drawings to identify the circuit protected by each fuse position.
Check contact wiring and downstream loads before returning power.
Use approved isolation and electrostatic-discharge handling.
Perform host-level I/O and alarm checks under the approved test procedure.
Alternative Names
Technical notes
Board identification: The offered photographs show IS200WETBH1BAA and FA/00 on the PCB.
Interface boundary: Connector and device functions must be resolved from the installed equipment drawings.
Commissioning record: Retain as-found harness photographs and document the completed host functional checks.
FAQ View All FAQ
-
How should IS200WETBH1BAA connector positions be recorded?Photograph the full face and each labelled plug before removal, then compare with the site wiring drawing.
-
Why does the FA/00 marking matter for IS200WETBH1BAA?It identifies a visible board revision detail that should be compared with the installed assembly and replacement approval.
-
Can fuse positions on IS200WETBH1BAA be assigned from a photograph alone?No. Use the project electrical drawing and installed wiring to identify each protected circuit.
-
What should be checked before changing a relay on IS200WETBH1BAA?Confirm its circuit role, contact wiring and approved spare specification from the equipment documentation.
-
How is harness keying checked for IS200WETBH1BAA?Compare each mating connector, pin arrangement and physical orientation with the removed unit.
-
What evidence supports acceptance of IS200WETBH1BAA after installation?Record restored connector positions and the host-level functional and alarm test results.
-
What can be inferred from the visible transformer on IS200WETBH1BAA?Its presence is visible; its winding voltages and circuit role require drawings or a verified original specification.
-
How should IS200WETBH1BAA be protected during handling?Apply the site isolation and ESD procedure and protect plug contacts and board supports.
Supporting new and legacy automation
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
Related cases and sourcing guidance
View all case studiesYou May Also Like
Product Browsing History
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.





