-
Match the complete marking
Include IS200WETBH1ABA and the board revision visible on the offered item. Compare the complete PCB identity with the installed board and approved equipment record.
-
Check the offered item before ordering
Request current front, rear and connector photographs of IS200WETBH1ABA. Confirm harness fit, board revision and included items against the installed assembly before approving the quotation.
Technical specifications for IS200WETBH1ABA
-
Manufacturer:General Electric
-
Product Category:General Automation
-
Spare Part Number:IS200WETBH1ABA
-
Weight:1.5 kg
-
Tariff Code:8537101190
-
Board form:Large printed circuit assembly
-
Harness arrangement:Multiple perimeter plug interfaces
-
Switching elements:Board-mounted relay groups
-
Protection hardware:Visible fuse positions
-
Magnetic component:Central transformer assembly
-
Service identification:Match label and board revision
-
System interface:Project-specific connector harnesses
Information
- Those visible parts establish the physical interface to its host equipment, while the actual connector assignments and electrical limits depend on the installed system design. The ABA execution must be matched as its own complete order code.
Interface: Perimeter harness connectors
Variant control: ABA marking reviewed separately
Those visible parts establish the physical interface to its host equipment, while the actual connector assignments and electrical limits depend on the installed system design. The ABA execution must be matched as its own complete order code.
When replacing this board, record the existing harness positions, compare the offered board against the machine drawings and verify the installed revision. Any BAA or other WETB variant requires separate engineering approval before substitution.
-
GE IS200WETBH1ABA technical reference
2-page reference on wetb printed circuit board, verified identification and installation planning. -
GE IS200WETBH1ABA installation verification guide
1-page guide for identification, connection review, installation checks and handover evidence.
Variant compatibility: The ABA connector and circuit arrangement requires its own approved host configuration; BAA is a separate execution.
-
Existing WETB position
Replace an installed IS200WETBH1ABA board where the equipment record calls for that execution. -
Perimeter harnesses
Match plug orientation, physical keying and cable labels to the installed assembly. -
Control enclosure
Confirm mechanical supports and clearance within the host enclosure. -
Service restoration
Run the site-approved checks for the host circuits affected by the board change.
Check the current unit label and board marking before accepting a replacement.
Record connector location and cable tag before disconnection.
Identify visible fuse positions in the project wiring documentation.
Do not treat the BAA execution as interchangeable without approval.
Use isolation, ESD control and support at the board mounting points.
Verify relevant control, alarm and protection functions after installation.
Alternative Names
Technical notes
Variant distinction: IS200WETBH1ABA is identified separately from IS200WETBH1BAA.
Physical evidence: Photographs show relays, plug interfaces, fuses and a central transformer.
Technical boundary: Circuit ratings and pin assignments require host-system documentation.
FAQ View All FAQ
-
How is the ABA variant of IS200WETBH1ABA verified?Compare the complete offered marking, board revision and connector layout with the existing installed board.
-
Can a BAA WETB board replace IS200WETBH1ABA?Only if the equipment manufacturer or approved project design explicitly accepts the alternate execution.
-
What installation record is useful for IS200WETBH1ABA?Keep labelled photos of the board face, harnesses, fuse positions and mounting arrangement.
-
How are IS200WETBH1ABA connector assignments determined?Use the approved host-system circuit diagram; the photograph does not establish pin functions.
-
Which circuit checks follow a IS200WETBH1ABA change?Test the host functions tied to its connectors under the site acceptance procedure.
-
How should the central magnetic component on IS200WETBH1ABA be assessed?Compare its marking and related wiring with the installed assembly and approved service document.
-
What should be checked for IS200WETBH1ABA enclosure fit?Confirm board supports, plug clearance and cable routing with the existing installation.
-
When is a revision change of IS200WETBH1ABA acceptable?Only after the installed equipment record and approved replacement guidance allow it.
Supporting new and legacy automation
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
Related cases and sourcing guidance
View all case studiesYou May Also Like
Product Browsing History
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.





