-
Match the complete marking
Include DS200SDCCG5A and any revision or assembly number visible on the item. Keep the exact reference on your enquiry and quotation.
-
Check the offered item before ordering
Request current label, board and connector photos of DS200SDCCG5A. Compare the offered reference and host configuration with the installed equipment before approval.
Technical specifications for DS200SDCCG5A
-
Manufacturer:General Electric
-
Product Category:General Automation
-
Spare Part Number:DS200SDCCG5A
-
Weight:0.55 kg
-
Tariff Code:8537101190
-
Offered base code:DS200SDCCG5A
-
Photographed full label:DS200SDCCG5AHD
-
Card family:SDCC drive-control card
-
Visible assembly:Plug-in printed circuit board
-
Configuration hardware:Socketed IC positions visible
-
Interface hardware:Multiple ribbon and board connectors
-
Board identification:GE SDCC marking
-
Revision control:Match full suffix and installed software
Information
- The photographed assembly has socketed devices and multiple board connectors that interface with the installed drive control hardware. Their individual purposes and firmware mapping depend on the drive configuration and the actual labelled revision.
Photographed revision: DS200SDCCG5AHD
Replacement: Match socketed devices and drive configuration
The photographed assembly has socketed devices and multiple board connectors that interface with the installed drive control hardware. Their individual purposes and firmware mapping depend on the drive configuration and the actual labelled revision.
Before replacement, capture the full card marking, socketed-device identities, connector positions and existing drive parameters. Do not apply feature differences documented for other SDCC groups to this G5A execution without a matching manufacturer instruction.
-
GE DS200SDCCG5A technical reference
2-page reference on drive control card, verified identification and installation planning. -
GE DS200SDCCG5A installation verification guide
1-page guide for identification, connection review, installation checks and handover evidence.
Hardware and software fit: Board suffix, socketed devices, firmware and mating control cards must agree with the drive record.
-
Installed drive control
Use in a drive assembly whose approved parts record calls for the G5A SDCC card. -
Socketed devices
Match populated positions and labelled revisions to the removed card. -
Adjacent control cards
Check connector and backplane interfaces against the installed drive arrangement. -
Service replacement
Preserve drive parameter and firmware records for a controlled card exchange.
Record DS200SDCCG5AHD or the actual offered-unit suffix.
Photograph each populated memory and configuration position.
Export or record parameters before removing the original card.
Label ribbon and board connectors before release.
Do not use G1/G3/G4-specific ratings for this G5A card.
Follow the approved startup and functional test sequence.
Alternative Names
Technical notes
Identity evidence: The photographed label reads DS200SDCCG5AHD.
Group boundary: Available SDCC G1/G3/G4 instructions do not establish G5A-specific features.
Service record: Retain the full label, socket population and drive configuration before replacement.
FAQ View All FAQ
-
What does the photographed HD suffix mean for DS200SDCCG5A?It is part of the visible full board label; match it to the installed revision and approved replacement record.
-
Can SDCC group 1 specifications be applied to DS200SDCCG5A?No; G5A requires its own applicable instruction or an approved configuration comparison.
-
Why photograph socketed ICs on DS200SDCCG5A?Their identities and locations can be relevant to firmware and drive-parameter restoration.
-
Which records should accompany a DS200SDCCG5A exchange?Keep the as-found label, populated-device record, drive parameters and connector map.
-
How should DS200SDCCG5A ribbon connectors be reconnected?Use the documented card orientation and the as-found cable labels; do not infer from another group.
-
What confirms DS200SDCCG5A is accepted by the host drive?Check the approved startup diagnostics and the controlled functional test for the installed drive.
-
Can another SDCC group substitute for DS200SDCCG5A?Only after the drive manufacturer or approved engineering change authorizes the complete card and software combination.
-
What should be inspected on DS200SDCCG5A before energization?Verify full marking, populated positions, connector seating and mechanical retention.
Supporting new and legacy automation
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
Related cases and sourcing guidance
View all case studiesYou May Also Like
Product Browsing History
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.




