-
Match the complete marking
Include IS200EMCSG1AA and any revision or assembly number visible on the item. Keep the exact reference on your enquiry and quotation.
-
Check the offered item before ordering
Request current label, board and connector photos of IS200EMCSG1AA. Compare the offered reference and host configuration with the installed equipment before approval.
Technical specifications for IS200EMCSG1AA
-
Manufacturer:General Electric
-
Product Category:General Automation
-
Spare Part Number:IS200EMCSG1AA
-
Weight:0.26 kg
-
Tariff Code:8537101190
-
Board family:EMCS
-
Product type:Exciter conduction sensor board
-
System family:EX2100 excitation control
-
Offered group:G1AA
-
Bridge application:100 mm thyristor bridge
-
Reference function:Conduction-sensing counterpart to EXCS
-
Service identity:Complete board label and revision
-
Commissioning:Host signal verification
Information
- The EMCS family identity establishes the board role, while sensor input allocation and electrical ranges remain dependent on the installed excitation hardware and the applicable board instruction. No adjacent group rating is assumed for G1AA.
Host: EX2100 control
Verification: Installed channel map
The EMCS family identity establishes the board role, while sensor input allocation and electrical ranges remain dependent on the installed excitation hardware and the applicable board instruction. No adjacent group rating is assumed for G1AA.
A service exchange should retain the existing board code, connector positions and cabinet revision record. Confirm the conduction-sensing channel indications with the host controller after replacement.
-
GE IS200EMCSG1AA technical reference
2-page reference on exciter conduction sensor board, verified identification and installation planning. -
GE IS200EMCSG1AA installation verification guide
1-page guide for identification, connection review, installation checks and handover evidence.
Channel fit: The installed sensor path and host board configuration determine the usable connection scheme.
-
EX2100 sensing chain
Use within an excitation cabinet configured for the EMCS conduction-sensor board. -
Control feedback
Review the configured sensing path used by the exciter control application. -
Cabinet maintenance
Compare the G1AA marking and board slot before removal. -
Post-service verification
Check related host indications and alarms after the replacement.
Read IS200EMCSG1AA and any additional revision marking.
Use cabinet drawings to trace connected sensing circuits.
Photograph each plug orientation before removal.
Apply exciter isolation and ESD requirements.
Do not assume another EMCS group uses identical sensing limits.
Compare as-found and restored conduction-sensor signals.
Alternative Names
Technical notes
Documented identity: GEH-6632 lists EMCS as an exciter conduction-sensor board.
Scope limit: No unverified channel count or input range is assigned to G1AA.
Service check: Validate connected sensor signals in the installed exciter.
FAQ View All FAQ
-
What is the documented role of IS200EMCSG1AA?It is an EMCS exciter conduction-sensor board in the EX2100 family.
-
How are IS200EMCSG1AA sensor channels identified?Use the cabinet channel map and applicable board instruction for the installed execution.
-
Can another EMCS group substitute for IS200EMCSG1AA?Only after approval of full board, signal and connector compatibility.
-
What should be saved before IS200EMCSG1AA removal?Keep board-label photos, plug locations and as-found host indications.
-
What is the safe work boundary for IS200EMCSG1AA?Follow the exciter isolation procedure and ESD controls.
-
How should IS200EMCSG1AA be assessed after power restoration?Check the relevant conduction-sensor indications, alarms and control response.
-
Why is G1AA significant for IS200EMCSG1AA?It is part of the offered complete execution and must match the approved replacement record.
-
Where should IS200EMCSG1AA circuit ratings come from?Use the applicable GE board instruction and installed cabinet design, not adjacent-model listings.
Supporting new and legacy automation
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
Related cases and sourcing guidance
View all case studiesYou May Also Like
Product Browsing History
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.






