-
Match the complete marking
Include DS200FSAAG2ABA DS2020FECNRX010A and any revision or assembly number visible on the item. Keep the exact reference on your enquiry and quotation.
-
Check the offered item before ordering
Request available label and connector photos. Have your maintenance team compare the offered DS200FSAAG2ABA DS2020FECNRX010A with the installed equipment and applicable GE documentation.
Technical specifications for DS200FSAAG2ABA DS2020FECNRX010A
-
Manufacturer:General Electric
-
Product Category:General Automation
-
Spare Part Number:DS200FSAAG2ABA
-
Weight:0.38 kg
-
Tariff Code:8537101190
-
Primary board family:DS200FSAAG2
-
DC2000 function:Field supply gate amplification
-
Field supply class:Non-reversing NRX
-
Associated reference:DS2020FECNRX010A
-
Power bridge:Four-SCR full-wave field-supply bridge
-
Board position:Mechanically mounted on the field-supply bridge
Information
- DS200FSAAG2ABA DS2020FECNRX010A serves the dc2000 field supply gate amplifier assembly role in a configured General Electric system; selection starts with the installed host and full marking.
Fault isolation: Separate command, gate path and SCR bridge
Acceptance: Check field-current response and drive diagnostics
The GE replacement instruction positions the G2 board on a four-SCR full-wave bridge. Gate-drive behavior and bridge operation depend on the correctly wired DC2000 field-supply assembly. The second reference, DS2020FECNRX010A, must be identified against the actual items and quotation before treating it as a separate supplied component or an interchangeable board.
Maintenance requires the installed field-supply designation, bridge connections, protective devices and existing board revision. With hazardous energy isolated, compare the original and offered hardware, then perform the approved field-current and drive-response checks when returning the supply to service.
-
General Electric DS200FSAAG2ABA DS2020FECNRX010A technical reference
Apter Power technical reference - PDF, 2 pages. Product identity, engineering context and applicability conditions. -
General Electric DS200FSAAG2ABA DS2020FECNRX010A installation guide
Prepared by Apter Power - PDF, 1 page. Configuration review, safe installation and functional acceptance.
Compatibility scope: The G2 board must match the installed NRX field-supply bridge and its connector arrangement; the role of DS2020FECNRX010A must be reconciled against the physical assembly.
-
DC motor field supply
Use the DS200FSAAG2 family in a matching DC2000 non-reversing field-supply bridge. -
SCR gate control
Interface the field-supply control circuit with the four-SCR bridge arrangement. -
Field-supply maintenance
Replace a failed board after matching bridge and connector identities. -
Two-reference quotation
Reconcile DS2020FECNRX010A with the physical assembly and itemized supply scope.
Apply the approved discharge and lockout procedure before touching the bridge.
Photograph the FSAAG2 and DS2020 markings and resolve their relationship.
Check SCR terminals, mounting and protection before board replacement.
Record gate, supply and field connections before disassembly.
Do not transfer the G2 instructions to a reversing field supply.
Check controlled field current and drive behavior under the approved procedure.
Alternative Names
Technical notes
Technical basis: GE GEI-100186, DS200FSAAG Series Replacement Instructions, for the DS200FSAAG2 field-supply gate-amplifier family.
Applicability: GEI-100186 applies to the DS200FSAAG2 family. DS2020FECNRX010A is retained as an additional offered reference; its physical identity and supply relationship require item-level confirmation.
FAQ View All FAQ
-
Why does the NRX designation matter for DS200FSAAG2ABA DS2020FECNRX010A?GE identifies the DS200FSAAG2 family for a non-reversing field supply. A reversing bridge uses a different arrangement and requires its own approved hardware.
-
How should the two reference strings in DS200FSAAG2ABA DS2020FECNRX010A be reconciled?Compare both physical labels and request an itemized quotation identifying whether one or more pieces are supplied.
-
What should be checked before lifting the gate board in DS200FSAAG2ABA DS2020FECNRX010A?Confirm field power isolation, stored-energy discharge and the as-found SCR bridge wiring under the site procedure.
-
How can a field-current fault be isolated around DS200FSAAG2ABA DS2020FECNRX010A?Separate board command, gate path, SCR bridge, protective devices and field circuit measurements using approved drive diagnostics.
-
Does the DS200FSAAG2 identity of DS200FSAAG2ABA DS2020FECNRX010A establish a reversing supply?No. The GE G2 instruction is specific to a non-reversing NRX field-supply configuration.
-
What mechanical fit matters when replacing DS200FSAAG2ABA DS2020FECNRX010A?Check mounting on the four-SCR bridge, terminal orientation and connector alignment against the installed assembly.
-
Can a similar FSAAG suffix replace DS200FSAAG2ABA DS2020FECNRX010A without review?No. Verify the G2 group, full revision, bridge type and approved replacement record.
-
What acceptance evidence should be retained after fitting DS200FSAAG2ABA DS2020FECNRX010A?Record protective-device status, field-current response and the relevant DC2000 drive diagnostics.
Supporting new and legacy automation
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
Related cases and sourcing guidance
View all case studiesYou May Also Like
Product Browsing History
-
DS200FSAAG2ABA DS2020FECNRX010AProduct Details -
IS200EXAMG1AABProduct Details -
DS3820PS7A1B1CProduct Details -
IS200WETBH1BAAProduct Details -
DS200TCQAG1AProduct Details -
DS200DDTBG2ABBProduct Details -
IS200EMCSG1AAProduct Details -
IS200WETBH1ABAProduct Details -
DS200SDCCG5AProduct Details -
IS200ECTBG1ABBProduct Details
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.





