OverviewManualsCommon ApplicationsCabling and Connectivity
The 21504-000-032-10-02 is noncontacting, gap-to-voltage transducer systems offer 80 mils (2 mm) of linear measuring range and are compatible with API 670 requirements. These systems measure static as well as dynamic distances between the probe tip and the observed target for any application requiring accurate, non-contacting displacement measurement.
Extended Case Length
API 670 Compliance
PPS High-Performance Tip / PPS
Their most common use is for shaft position and vibration measurements on rotating and reciprocating machinery. They are designed for use with virtually any machine type, including gas and steam turbines, compressors, pumps, centrifuges, electric motors, and generators.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 21504-000-032-10-02 7200 Series Proximity Sensor Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Petrochemical Processing
Specifically used for radial vibration to indicate bearing condition and axial thrust position. It is designed to withstand unusually harsh, wet, and/or chemical environments.
Steam Power Generation
Applied to monitor shaft position and vibration measurements on steam turbines. The system offers 80 mils (2 mm) of linear measuring range for critical rotating assets.
Natural Gas Compression
Designed for use with virtually any machine type including gas turbines and compressors. It provides accurate, noncontacting displacement measurement for high-speed gas equipment.
Industrial Water Treatment
The PPS (polyphenylene sulfide) probe tip is a high-performance plastic capable of resisting corrosive fluids. It ensures reliability in pumps and centrifuges operating in harsh environments.
Electric Motor Manufacturing
Used for monitoring vibration and shaft average radial position in large electric motors and generators. It provides the high-precision signal conditioning required for linear display on monitors.
Refining and Pipelines
Compatible with API 670 requirements for standardized monitoring of rotating and reciprocating machinery. It maintains performance even when located up to 1,000 feet from standard monitors.
The combination of probe with integrai lead and extension cable is designed to achieve a system length of cither five or nine metres from probe tip to Proximitor. Probes are available with integral leads of various lengths to match the average extension cable lengths. Probes and cables of the same length, and Proximitors with the same part number, are completely interchangeable. For added protection, stainless steel armor is available. It provides improved resistance to physical abuse.
An improved 8 mm version of the 7200 System is now standard which includes Bently Nevada's Cable Locu feature. This new technique of securing the coaxial cable to the probe tip provides the strongest junction yet offered by Bently Nevada and increases the durability of the probe during installation and usage.
What is the specific configuration of model 21504-000-032-10-02?
This model is a 7200 Series 8mm proximity probe with 0.0 in unthreaded length, 3.2 in overall case length, 1.0 metre (3.3 feet) total cable length, and a miniature male coaxial connector.
What is the linear measuring range of the 21504-000-032-10-02 probe?
The system offers a linear range of 80 mils (2.0 mm), which typically begins at approximately 10 mils (0.25 mm) from the probe face when used with an AISI 4140 steel target.
What material is used for the 8mm probe tip of the 21504-000-032-10-02?
The 8 mm probes are constructed of polyphenylene sulfide (PPS), a high-performance plastic capable of withstanding unusually harsh, wet, and/or chemical environments.
What are the environmental temperature limits for the 21504-000-032-10-02?
The probe and integral cable are designed to operate within a temperature range of -30°F to +350°F (-34°C to +177°C) according to official environmental limits.
What are the primary measurement applications for the 21504-000-032-10-02?
It is used for radial vibration to indicate bearing condition, axial thrust position for bearing wear, shaft average radial position, vibration phase angle, and eccentricity.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
Please try to be as accurate as possible with your search.
We can quote you on 1000s of specialist parts, even if they are not listed on our website.