-
Match the complete marking
Include the complete 330130-085-02-CN marking and photographs of the installed connection and mounting position.
-
Check the offered item before ordering
Request available-unit label and connector photographs. Have your maintenance team compare the offered 330130-085-02-CN with the installed equipment and applicable Bently Nevada documentation.
Technical specifications for 330130-085-02-CN
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330130-085-02-CN
-
Weight:0.3 kg
-
Tariff Code:8537101190
-
Cable family:330130 3300 XL standard extension cable
-
Cable length:8.5 m (27.9 ft)
-
Connector and cable option:02 - Standard cable with connector protector
-
Agency option:CN - Country-specific ordering option
-
Cable construction:75 ohm triaxial, FEP insulated
-
Typical capacitance:69.9 pF/m
-
Nominal center-conductor resistance:1.87 +/- 0.28 ohm at 8.5 m
-
Nominal jacket resistance:0.56 +/- 0.11 ohm at 8.5 m
-
Minimum bend radius:25.4 mm
-
Connector material:Gold-plated brass or beryllium copper
-
Maximum connector torque:0.565 N m
-
Standard cable temperature:-52 to +177 deg C
-
System matching rule:Probe length plus extension cable length equals Proximitor system length
Information
- The cable completes the electrical path between a compatible 3300 XL probe and Proximitor Sensor while preserving the selected system length.
Protected detachable interface: The standard cable includes a connector protector for the probe-side ClickLoc joint.
Country-specific execution: CN is retained as the documented country ordering option without assigning an unsupported approval description.
The extension cable is part of the calibrated electrical chain. Its length must be added to the probe lead and matched to the total length of the selected 3300 XL Proximitor Sensor.
The CN suffix is listed by the manufacturer as an available country-specific ordering option for 330130. Installation acceptance still depends on the exact supplied marking, applicable approval documentation, connector condition and complete-channel response.
330130-085-02-CN Official Datasheet Excerpt
Bently Nevada 3300 XL 8 mm Proximity Transducer System Datasheet 141194 Rev. AN; Bently Nevada Approvals Quick Reference Guide 108M1756 Rev. AV. Selected original pages covering the applicable product family, technical data and ordering information.330130-085-02-CN Installation & Verification Guide
Apter Power field guide covering identity capture, installed relationships, controlled replacement, commissioning and handover.
Application scope: Use it only where the probe lead and this cable produce the electrical length required by the installed 3300 XL 8 mm Proximitor Sensor.
Long probe-to-sensor routing
Provide 8.5 m of extension between the probe connection and the Proximitor Sensor location.Protected connector joints
Use the fitted protector over the finger-tight ClickLoc interface in the machine environment.Matched 9 m systems
Combine with the appropriate 0.5 m probe lead where the installed Proximitor Sensor requires 9 m total length.Country-option maintenance
Retain the CN suffix and the associated supplied documentation when replacing the installed cable.
Confirm probe lead plus 8.5 m cable equals the Proximitor Sensor requirement.
Prevent oil, debris and moisture from entering before the ClickLoc joint is seated.
Do not trap, twist or sharply bend the cable beneath the protector.
Maintain at least 25.4 mm through the complete routed path.
Do not replace it with 00 or 05 without an approved selection review.
Verify continuity, gap voltage and dynamic response after cable replacement.
Alternative Names
Technical notes
Exact configuration: 8.5 m standard FEP extension cable, connector protector and CN country-specific ordering option
Calibration relationship: Probe and extension-cable lengths must sum to the Proximitor Sensor total length
Technical reference: Bently Nevada 3300 XL 8 mm Proximity Transducer System Datasheet 141194 Rev. AN; Approvals Quick Reference Guide 108M1756 Rev. AV
FAQ View All FAQ
-
How does 330130-085-02-CN fit a 9 m transducer system?It is normally paired with the appropriate 0.5 m probe lead so the probe and 8.5 m extension cable total 9 m.
-
What does option 02 provide on 330130-085-02-CN?It selects standard FEP-insulated cable with a connector protector at the probe-side ClickLoc joint.
-
What can be concluded from the CN suffix on 330130-085-02-CN?The manufacturer lists CN as an available country-specific ordering option; the applicable supplied approval documentation must be checked separately.
-
How should the connectors on 330130-085-02-CN be tightened?Seat compatible ClickLoc connectors finger-tight until locked; do not exceed the documented 0.565 N m maximum connector torque.
-
What continuity value is expected for 330130-085-02-CN?The 8.5 m cable has a nominal center-conductor resistance of 1.87 ohm with the documented tolerance; compare using an appropriate method and disconnected circuit.
-
Why is the 25.4 mm bend radius important for 330130-085-02-CN?Tighter bends can damage the triaxial construction or alter the routed connector load and channel reliability.
-
Can 330130-085-02-CN be substituted by any 8.5 m coaxial cable?No. Preserve the 3300 XL triaxial construction, capacitance, connector system, option suffix and matched electrical length.
-
What should be proven after replacing 330130-085-02-CN?Confirm connector seating, continuity, system gap voltage, stable bias and the expected vibration or position response at the monitor.
Supporting new and legacy automation
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
Related cases and sourcing guidance
View all case studiesYou May Also Like
Product Browsing History
-
330130-085-02-CNProduct Details -
330930-065-04-05Product Details -
330930-065-02-00Product Details -
330930-045-04-05Product Details -
A74104-241-53Product Details -
330730-040-01-00Product Details -
330500-00-20Product Details -
330500-02-01Product Details -
1769-IQ32TProduct Details -
1794-ACNR15Product Details
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.






