-
Match the complete marking
Include the complete 330908-22-31-10-01-05 marking and photographs of the installed connection and mounting position.
-
Check the offered item before ordering
Request available-unit label and connector photographs. Have your maintenance team compare the offered 330908-22-31-10-01-05 with the installed equipment and applicable Bently Nevada documentation.
Technical specifications for 330908-22-31-10-01-05
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330908-22-31-10-01-05
-
Weight:0.05 kg
-
Tariff Code:8537101190
-
Probe family:3300 XL NSv
-
Unthreaded length:2.2 in
-
Overall case length:3.1 in
-
Total probe length:1.0 m
-
Connector and cable option:01 - ClickLoc with protector, standard cable
-
Agency approval option:05 - Multiple approvals
-
Probe thread:3/8-24 UNF-2A
-
Probe construction:Standard mount, without armor
-
Cable construction:75 ohm triaxial, FEP insulated
-
System linear range:1.5 mm (60 mils), matched NSv system
-
System scale factor:7.87 V/mm (200 mV/mil)
-
Recommended gap:1.0 mm (40 mils)
-
Frequency response:0 to 10 kHz, +0/-3 dB typical
-
Recommended flat target:13 mm diameter minimum
-
Minimum cable bend radius:25.4 mm
Information
- Its 2.2 in unthreaded reach, 3.1 in case, 1.0 m standard cable and protected ClickLoc connector define a specific NSv mounting execution.
Small-target capability: The documented system can work with smaller shafts and flat targets when spacing and gap limits are respected.
Protected field connection: The selected connector protector shields the ClickLoc joint during routing and service.
A 1.0 m standard FEP-insulated triaxial lead terminates in a ClickLoc connector with protector. The probe is one element of an NSv system that also requires the correct extension cable and Proximitor Sensor electrical length.
NSv performance is specified for the complete matched chain and the stated AISI 4140 target conditions. Target diameter, counterbore and spacing to adjacent probes can change scale factor or cross-talk, so commissioning must include gap and response checks.
330908-22-31-10-01-05 Official Datasheet Excerpt
Bently Nevada 3300 XL NSv Proximity Transducer System Datasheet 147385 Rev. R. Selected original pages covering the applicable product family, technical data and ordering information.330908-22-31-10-01-05 Installation & Verification Guide
Apter Power field guide covering identity capture, installed relationships, controlled replacement, commissioning and handover.
Application scope: Use the probe where small target geometry or restricted side-view clearance makes the documented NSv system appropriate.
Small-shaft radial vibration
Use the documented target and spacing limits when the shaft is below standard 8 mm-system geometry.Restricted counterbores
Check counterbore diameter and operating gap before finalizing the installed position.Axial-position targets
Maintain target flatness and adequate tip separation for the required travel.Keyphasor duty
Confirm the target feature and receiving-channel settings for phase-reference or speed use.
Measure the original insertion datum and locknut position before removal.
Verify the complete port and bracket depth, not only the thread size.
Keep the sensing face free from impact, contamination and side loading.
Review adjacent probe geometry to limit cross-talk on small shafts or axial targets.
Seat the ClickLoc joint finger-tight and refit the protector without pinching the cable.
Set live gap and compare the restored channel with its accepted baseline.
Alternative Names
Technical notes
Exact configuration: 3/8-24 UNF NSv probe without armor, 2.2 in unthreaded length, 3.1 in case, 1.0 m standard lead, connector protector and multiple approvals
System boundary: Published values apply to the matched NSv probe, extension cable and Proximitor Sensor
Technical reference: Bently Nevada 3300 XL NSv Proximity Transducer System Datasheet 147385 Rev. R
FAQ View All FAQ
-
When is 330908-22-31-10-01-05 preferable to a standard 8 mm probe?Use it where counterbore, side-view, rear-view or target-size restrictions require the smaller NSv geometry.
-
How is the 2.2 in unthreaded reach of 330908-22-31-10-01-05 verified?Record the installed datum, locknut position and target distance before removal, then reproduce them with the 3.1 in case.
-
What target diameter should be planned for 330908-22-31-10-01-05?A 13 mm flat target is the recommended minimum; smaller targets can alter scale factor and require application review.
-
How should adjacent 330908-22-31-10-01-05 probes be spaced?Use the NSv guidance for tip separation and shaft geometry; small shafts may require axial offset to limit cross-talk.
-
What is protected by option 01 on 330908-22-31-10-01-05?The ClickLoc probe-to-extension connection receives a connector protector over the standard cable joint.
-
Can the 1.5 mm range of 330908-22-31-10-01-05 be assigned to the probe alone?No. It is a matched-system value under the documented target, gap, supply and temperature conditions.
-
How is 330908-22-31-10-01-05 commissioned in a restricted counterbore?Set the live gap, check available travel, and compare runout and dynamic response while confirming the counterbore does not distort the far-gap response.
-
Which order-code elements must be photographed on 330908-22-31-10-01-05?Capture 22, 31, 10, 01 and 05 with the full base number, plus the installed orientation and companion cable identities.
Supporting new and legacy automation
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
Related cases and sourcing guidance
View all case studiesYou May Also Like
Product Browsing History
-
330908-22-31-10-01-05Product Details -
330101-00-27-10-02-05Product Details -
330104-00-03-10-01-00Product Details -
330103-00-08-05-02-05Product Details -
330103-06-20-10-02-00Product Details -
330104-10-16-05-01-00Product Details -
330103-00-05-10-01-05Product Details -
330102-00-25-10-02-05Product Details -
330102-00-27-10-02-05Product Details -
330102-00-52-10-02-00Product Details
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.







