-
Match the complete marking
Include the complete 330102-00-25-10-02-05 marking and photographs of the installed connection and mounting position.
-
Check the offered item before ordering
Request available-unit label and connector photographs. Have your maintenance team compare the offered 330102-00-25-10-02-05 with the installed equipment and applicable Bently Nevada documentation.
Technical specifications for 330102-00-25-10-02-05
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330102-00-25-10-02-05
-
Weight:0.62 kg
-
Tariff Code:8537101190
-
Probe family:3300 XL 8 mm
-
Mounting thread:3/8-24 UNF-2A
-
Armor:With armor
-
Unthreaded length:0.0 in
-
Overall case length:2.5 in
-
Total probe length:1.0 m
-
Connector and cable option:02 - ClickLoc, standard cable
-
Agency approval option:05 - CSA, ATEX and IECEx
-
Probe tip material:Polyphenylene sulfide (PPS)
-
Probe case material:AISI 303 or 304 stainless steel
-
Cable construction:75 ohm triaxial, FEP insulated
-
System linear range:2.0 mm (80 mils), matched 3300 XL 8 mm system
-
System scale factor:7.87 V/mm (200 mV/mil)
-
Recommended radial-vibration gap:-9 V DC; approximately 1.27 mm
-
Frequency response:0 to 10 kHz, +0/-3 dB
-
Standard probe temperature:-52 to +177 deg C
-
Minimum cable bend radius:25.4 mm
Information
- The order code selects a zero-unthreaded armored probe, standard ClickLoc cable connection and multiple-approval execution for a matched 1.0 m 3300 XL 8 mm system.
Compact American-thread fit: A 3/8-24 UNF case with no unthreaded reach suits established probe ports and brackets.
Interchangeable XL chain: Correctly matched 3300 XL 8 mm components can be exchanged without individual bench calibration.
The 1.0 m probe connects through the miniature ClickLoc interface without a factory-installed connector protector. Extension-cable selection must preserve the total electrical length required by the 3300 XL Proximitor Sensor.
System performance is specified for a matched 3300 XL 8 mm chain and an AISI 4140 target. After installation, set gap from live voltage and verify runout, dynamic response and monitor indication against the approved machine baseline.
330102-00-25-10-02-05 Official Datasheet Excerpt
Bently Nevada 3300 XL 8 mm Proximity Transducer System Datasheet 141194 Rev. AN. Selected original pages covering the applicable product family, technical data and ordering information.330102-00-25-10-02-05 Installation & Verification Guide
Apter Power field guide covering identity capture, installed relationships, controlled replacement, commissioning and handover.
Application scope: Apply the probe to non-contacting radial-vibration, axial-position or phase-reference duty within the documented 8 mm system geometry.
Armored machine routing
Use the protected lead where mechanical contact risk is higher along the installed cable path.Radial shaft vibration
Gap the probe in the documented linear range and retain the required target diameter and probe spacing.Axial position monitoring
Check available travel, target flatness and tip-to-tip clearance before accepting the mounting geometry.Phase-reference pickup
Confirm target feature, speed range and receiving-channel settings before commissioning.
Verify 00, 25, 10, 02 and 05 on the supplied marking.
Do not twist the probe lead or use the armor as a pulling point.
Keep 3/8-24 engagement within the documented 0.563 in limit.
Keep mating surfaces clean and dry; fit the specified protector when the route requires it.
Probe and extension-cable lengths must agree with the Proximitor Sensor.
Check gap voltage, runout and dynamic signal after the complete chain is reconnected.
Alternative Names
Technical notes
Exact configuration: Armored 3/8-24 UNF probe, 0.0 in unthreaded length, 2.5 in case, 1.0 m lead, standard ClickLoc cable and multiple approvals
System boundary: Range, scale and linearity are matched-system values, not standalone probe outputs
Technical reference: Bently Nevada 3300 XL 8 mm Proximity Transducer System Datasheet 141194 Rev. AN
FAQ View All FAQ
-
How does the armor affect installation of 330102-00-25-10-02-05?It protects the cable mechanically but does not permit twisting, sharp bending or pulling on the armor ferrule during routing.
-
Why must the 2.5 in case length of 330102-00-25-10-02-05 be retained?It fixes the threaded reach and locknut position relative to the machine target; a different case can change the installed gap range.
-
Does 330102-00-25-10-02-05 include a connector protector?No. Code 02 selects the standard ClickLoc cable without a factory-installed protector; a separate protector may be specified where required.
-
Which total electrical length applies to 330102-00-25-10-02-05?Its probe lead is 1.0 m. The extension cable and Proximitor Sensor must be selected so the complete chain has the required system length.
-
How should 330102-00-25-10-02-05 be tightened in a 3/8-24 port?Use the documented probe-case torque and keep thread engagement within 0.563 in; do not load the cable or armor while tightening.
-
What target is used for published performance of 330102-00-25-10-02-05?Published values use an AISI 4140 steel target under the stated supply, load, gap and temperature conditions.
-
How is 330102-00-25-10-02-05 checked after replacement?Set the gap near -9 V DC, then compare slow-roll runout, vibration or position response and monitor indication with the accepted baseline.
-
What does approval code 05 mean for 330102-00-25-10-02-05?It selects the documented CSA, ATEX and IECEx approval option; the installed circuit still has to follow the applicable approved drawing.
Supporting new and legacy automation
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
Related cases and sourcing guidance
View all case studiesYou May Also Like
Product Browsing History
-
330102-00-25-10-02-05Product Details -
330102-00-27-10-02-05Product Details -
330102-00-52-10-02-00Product Details -
84661-12Product Details -
2711P-T15C21D8SProduct Details -
3500/15 106M1079-01Product Details -
21504-000-032-10-02Product Details -
330130-085-02-CNProduct Details -
330930-065-04-05Product Details -
330930-065-02-00Product Details
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.







