-
Match the complete marking
Include 128987-130-00-00 and every revision or approval marking visible on the item. Keep the exact reference on your enquiry and quotation. -
Check the offered item before ordering
Request available label and interface photos. Have your maintenance team compare the offered 128987-130-00-00 reference with the installed equipment and applicable Bently Nevada documentation.
Technical specifications for 128987-130-00-00
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:128987-130-00-00
-
Weight:0.45 kg
-
Tariff Code:8537101190
-
Component identity:Extension cable
-
Family context:Legacy 3300 XL transducer-chain service
-
Supplied length code:130
-
Connector option:00 retained from complete marking
-
Approval option:00 retained from complete marking
-
Measurement principle:Carries the probe impedance signal to matching proximity electronics
-
Electrical boundary:Cable is part of a calibrated probe-cable-Proximitor chain
-
Target variables:Extension-cable family, total system length and connector identity
-
Inspection points:Center contact, shield contact, insulation, strain relief and outer jacket
-
Continuity check:Center and shield paths tested only with the monitoring channel isolated
-
Routing checks:Bend clearance, abrasion protection, contamination and independent support
-
Acceptance check:Restored gap or bias and monitor response against the installed baseline
Information
- Bently Nevada 128987-130-00-00 is a legacy extension-cable identity for an installed proximity transducer chain; exact field meanings are retained without unsupported recoding.
Configuration boundary: The 130-00-00 fields are retained exactly; no undocumented length conversion is assigned.
System role: Impedance path between the installed probe and matching proximity electronics.
Because the current public manufacturer ordering table reviewed for the modern 3300 XL families does not decode this legacy 128987 pattern, the 130-00-00 fields are preserved without assigning an unsupported physical length or connector construction.
Acceptance is based on the installed system: verify connector condition and isolated continuity, restore the documented chain, gap or bias, and compare monitor indication and controlled operating response with the machine baseline.
-
Bently Nevada 128987-130-00-00 technical reference
Selected manufacturer pages covering the applicable family, technical data and exact order-code fields. -
Bently Nevada 128987-130-00-00 engineering guide
Apter Power installation, configuration, diagnostic and acceptance guidance.
Platform applications: The uses below require the documented legacy 3300 XL extension-cable service companion components and approved machine drawing.
-
Installed signal path
Connect the documented proximity probe to its matching signal conditioner without changing the approved electrical chain. -
Condition-monitoring service
Use the cable only with the documented transducer and monitor or conditioner family assigned to the machine channel. -
Maintenance replacement
Match conductor count, connector, length, armor and routing before disturbing the installed cable. -
Channel acceptance
Prove continuity, insulation condition and returned channel response against the approved machine baseline.
Match 128987-130-00-00, cable length, connector and conductor construction with the installed record.
Place the monitor channel and machine in the approved maintenance state before disconnecting or checking continuity.
Keep contacts dry and clean; do not use the connector or terminal lugs as a pulling point.
Preserve bend clearance, armor support, abrasion protection and separation from damaging heat or sharp edges.
Label each conductor and shield before removal, then compare end-to-end continuity with the applicable wiring drawing.
After reconnection, verify the expected monitor indication and operating response before return to service.
Alternative Names
Technical notes
Identity boundary: Procurement records support extension-cable identity; the exact 130-00-00 field meanings require delivered marking or legacy documentation.
Electrical relationship: Do not substitute cable length or family independently because the cable is part of the calibrated probe-cable-Proximitor chain.
Technical reference: Legacy 128987 extension-cable identity supported by industrial procurement records; current exact-field manufacturer table not located.
FAQ View All FAQ
-
What identity evidence should be checked for 128987-130-00-00?Compare the complete marking, both connector ends and the installed spare-parts record; do not shorten the identity to 128987-130.
-
How should the length field of 128987-130-00-00 be handled?Retain the 130 code exactly and verify physical length from the delivered item or approved legacy record; no unsupported conversion is applied.
-
Which companion components must be recorded with 128987-130-00-00?Record the probe, extension cable, Proximitor and monitor-channel identities as one installed measurement chain.
-
What connector inspection is required for 128987-130-00-00?With the channel isolated, inspect center and shield contacts, insulation, strain relief and environmental protection at both ends.
-
How should continuity be checked on 128987-130-00-00?Use the approved isolated method to compare center and shield paths with the installed cable record before substituting any component.
-
What routing checks apply to 128987-130-00-00?Record bend clearance, abrasion protection, contamination exposure, independent support and any joint protection along the route.
-
What proves the channel after replacing 128987-130-00-00?Restore the documented chain, gap or bias and compare monitor indication and controlled operating response with the accepted machine baseline.
-
What handover evidence is required for 128987-130-00-00?Retain the complete marking, physical length confirmation, connector photographs, continuity results, companion identities and as-left channel response.
Supporting new and legacy automation
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
Related cases and sourcing guidance
View all case studiesYou May Also Like
Product Browsing History
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.






