Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 6ES7153-2BA00-0XB0
For more information on how your data is processed and stored by Apterpower please read our privacy policy
-
Match the complete marking
Include 6ES7153-2BA00-0XB0 and any revision or assembly number visible on the item. Keep the exact reference on your enquiry and quotation.
-
Check the offered item before ordering
Request available label and connector photos. Have your maintenance team compare the offered 6ES7153-2BA00-0XB0 with the installed equipment and applicable Siemens documentation.
Technical specifications for 6ES7153-2BA00-0XB0
-
Manufacturer:Siemens
-
Product Category:PLC Systems
-
Spare Part Number:6ES7153-2BA00-0XB0
-
Weight:0.2 kg
-
Tariff Code:8537101190
-
Product series:SIMATIC ET 200M
-
Product type:IM 153-2 Interface Module
-
Fieldbus:PROFIBUS DP
-
Station function:Interface for configured ET 200M I/O modules
-
Isochronous mode:Supported on E01+ with qualified configuration
-
Station role:PROFIBUS DP slave
-
Isochronous setup:STEP 7 V5.2 / GSD rev. 4; PROFIBUS ≥1.5 Mbps
Information
Overview
Downloads
Applications / Compatibility
Product Precautions
- Siemens 6ES7153-2BA00-0XB0 is an IM 153-2 interface module for an ET 200M distributed I/O station.
Plant use: Locate process I/O closer to the field equipment
Network service: Preserve the station address and bus termination
Restoration: Check diagnostics and cyclic I/O data exchange
Network service: Preserve the station address and bus termination
Restoration: Check diagnostics and cyclic I/O data exchange
Siemens 6ES7153-2BA00-0XB0 is an IM 153-2 interface module for an ET 200M distributed I/O station. It connects a configured ET 200M station to a PROFIBUS DP automation network and coordinates the station's installed I/O modules. The controller program and station configuration determine which process signals are exchanged.
The interface module is part of a modular station rather than a stand-alone controller. Its address, hardware configuration, PROFIBUS network arrangement and fitted I/O modules must be retained or deliberately re-engineered during service. Revision-dependent capabilities, including isochronous operation, require checking the actual module version and engineering configuration.
ET 200M stations are used to position process I/O close to field equipment and reduce long point-to-point wiring back to the central controller. A replacement interface must match the installed rack arrangement, bus connector and configured station identity. After restoration, review bus diagnostics and affected I/O under the site's approved test procedure.
The interface module is part of a modular station rather than a stand-alone controller. Its address, hardware configuration, PROFIBUS network arrangement and fitted I/O modules must be retained or deliberately re-engineered during service. Revision-dependent capabilities, including isochronous operation, require checking the actual module version and engineering configuration.
ET 200M stations are used to position process I/O close to field equipment and reduce long point-to-point wiring back to the central controller. A replacement interface must match the installed rack arrangement, bus connector and configured station identity. After restoration, review bus diagnostics and affected I/O under the site's approved test procedure.
Controller platform reference: SIMATIC ET 200M. Match the installed system and complete unit marking.
Technical downloads for Siemens 6ES7153-2BA00-0XB0: an Apter Power technical reference and installation verification guide.
-
Siemens 6ES7153-2BA00-0XB0 technical reference
Apter Power technical reference - PDF, 2 pages. Product identity, verified characteristics, system integration and selection checks. -
Siemens 6ES7153-2BA00-0XB0 installation guide
Apter Power installation verification guide - PDF, 2 pages. Identity, host configuration, inspection and functional release checks.
The technical reference summarizes verified product information. Confirm the installed configuration and use the applicable site procedures during installation and service.
Distributed-I/O application: Siemens 6ES7153-2BA00-0XB0 is an IM 153-2 interface module for an ET 200M station on PROFIBUS DP. It links the configured remote I/O modules to the controller so field signals can be exchanged across the station.
Compatibility scope: The PROFIBUS address, bus segment, ET 200M module map and hardware execution must match the installed controller project. Advanced station features depend on the exact revision and approved configuration.
Compatibility scope: The PROFIBUS address, bus segment, ET 200M module map and hardware execution must match the installed controller project. Advanced station features depend on the exact revision and approved configuration.
-
Remote process I/O
Place sensor and actuator modules near a process unit while their values are exchanged with the central PLC over PROFIBUS DP. The installed ET 200M module set defines the available channels. -
Machine-section I/O
Connect a machine section with several field devices through one distributed ET 200M station. The controller program continues to own interlocks and sequencing. -
Existing bus expansion
Integrate a documented ET 200M station into a compatible PROFIBUS DP network. Bus address, segment topology and configured station modules must agree. -
Interface-module replacement
Restore the same IM 153-2 station role after checking the complete order code and module map. A visually similar interface can require different configuration support.
Installation and commissioning checks for Siemens 6ES7153-2BA00-0XB0. Preserve PROFIBUS and ET 200M station identity during the exchange.
Record the exact interface
Match 6ES7153-2BA00-0XB0 and hardware revision to the configured station. Record the rack position and fitted I/O modules.
Isolate the station
Apply the site procedure for ET 200M power and connected field circuits before removal. Avoid interrupting other bus nodes unintentionally.
Preserve bus settings
Record the PROFIBUS address, connector, termination state and cable route. Restore the same network role after replacement.
Check the station map
Compare the installed I/O sequence and any interface options with the hardware configuration. Do not change module order during a narrow interface repair.
Protect contacts
Handle the backplane connection and PROFIBUS connector with electrostatic and mechanical care. Confirm proper seating and cable strain relief.
Verify communication
Check station diagnostics, bus communication and representative affected I/O. Clear configuration faults before returning the process to service.
Alternative Names
Siemens 6ES7153-2BA00-0XB0
6ES71532BA000XB0
Technical notes
System relationship: The interface module is part of a modular station rather than a stand-alone controller. Its address, hardware configuration, PROFIBUS network arrangement and fitted I/O modules must be retained or deliberately re-engineered during service. Revision-dependent capabilities, including isochronous operation, require checking the actual module version and engineering configuration.
Applicability: The characteristics above describe the identified SIMATIC ET 200M execution of 6ES7153-2BA00-0XB0. Optional functions, connected devices and installed revisions must be checked against the complete marking and approved project configuration.
Technical reference: Siemens SIMATIC ET 200M operating instructions, IM 153-2 interface module.
FAQ View All FAQ
-
What is the product type of Siemens 6ES7153-2BA00-0XB0?IM 153-2 interface module.
-
What is the distributed i/o family of Siemens 6ES7153-2BA00-0XB0?SIMATIC ET 200M.
-
What is the fieldbus of Siemens 6ES7153-2BA00-0XB0?PROFIBUS DP.
-
What is the station function of Siemens 6ES7153-2BA00-0XB0?Interface for configured ET 200M I/O modules.
-
What is the advanced functions of Siemens 6ES7153-2BA00-0XB0?Hardware-revision and project dependent.
-
Which host system is appropriate for Siemens 6ES7153-2BA00-0XB0?This execution belongs to SIMATIC ET 200M. Match the complete installed configuration and any revision before replacement.
-
What should be preserved before replacing Siemens 6ES7153-2BA00-0XB0?Record the full label, fitted connections and approved SIMATIC ET 200M settings. Preserve the existing wiring and configuration record.
-
How is Siemens 6ES7153-2BA00-0XB0 checked after installation?Check diagnostics and the affected im 153-2 interface module functions under the approved site test procedure.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
-
6ES7153-2BA00-0XB0Product Details
-
6ES7412-2XG00-0AB0Product Details
-
8C-PAOHA1 51454469-275Product Details
-
6SE7034-5HK84-1JC0Product Details
-
6ES7952-1KM00-0AA0Product Details
-
6ES7952-1AM00-0AA0Product Details
-
C98043-A7011-L6Product Details
-
6ES7365-0BA01-0AA0Product Details
-
MC-TAOX12 51304335-125Product Details
-
51402797-200 51305319-100Product Details
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.