Which load voltages can Siemens 6ES7132-4HB01-0AB0 switch?

Its relay contacts are specified for 24–120 V DC loads or 24–230 V AC loads.

How many field circuits does Siemens 6ES7132-4HB01-0AB0 control?

It provides two independently addressed relay output channels.

What continuous current is assigned to each Siemens 6ES7132-4HB01-0AB0 output?

Each relay channel is rated for 5 A under the specified operating conditions; the minimum load current is 8 mA.

Why is an external protective device needed with Siemens 6ES7132-4HB01-0AB0?

The outputs do not include short-circuit protection, so the field circuit needs the correctly coordinated external protection.

How often may Siemens 6ES7132-4HB01-0AB0 switch an inductive load?

The specified maximum switching rate for inductive loads is 0.5 Hz, lower than the 2 Hz limit for resistive or lamp loads.

What can Siemens 6ES7132-4HB01-0AB0 do when the CPU or master stops?

The configured response can apply a substitute value or retain the last value; the selected behavior must match the machine safety design.

What do the green indicators on Siemens 6ES7132-4HB01-0AB0 show?

Each green channel LED indicates the commanded output state; it does not by itself prove that the relay contact or field load changed state.

How should both channels of Siemens 6ES7132-4HB01-0AB0 be commissioned?

Command one output at a time, measure the contact and field-load response, verify electrical isolation and protection, then test the configured stop-state behavior.

6ES7132-4HB01-0AB0

Name: 6ES7132-4HB01-0AB0
Brand: Siemens
SKU: 6ES7132-4HB01-0AB0

ET 200S Two-Relay Digital Output Module

Product image is representative; revision or series may vary. Contact us to request a specific version.

Product Describe：

Siemens 6ES7132-4HB01-0AB0 is an ET 200S electronic module with two isolated relay outputs for 24–120 V DC or 24–230 V AC loads up to 5 A per output.

Ask our team:

Phone: +86 180 3023 5313 E-Mail: sales13@apterpower.com

Immediate Dispatch
Available for dispatch immediately.

Dedicated Manager
Personalized one-to-one VIP service

ISO 9001:2015 Certified
Trusted quality management

Get a quick price for 6ES7132-4HB01-0AB0

E-mail *

Mobile *

Company

Content *

Quantity *

Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Get a Quote

For more information on how your data is processed and stored by Apterpower please read our privacy policy

What happens after you enquire

1

Requirement review

We review the part number, quantity and delivery requirements and ask for any missing details.
2

Quotation and availability

We confirm the proposed item, condition, availability, price and estimated lead time in the quotation.
3

Order confirmation and dispatch

Once the quotation and purchasing details are agreed, your contact will coordinate the order and available dispatch information.

Technical specifications for 6ES7132-4HB01-0AB0

Manufacturer:

Siemens
Product Category:

PLC Systems
Spare Part Number:

6ES7132-4HB01-0AB0
Estimated shipping dimensions:

12×7.5×12cm
Weight:

0.3 kg
Tariff Code:

8537101190
Counliy of origin:

Germany
Output type:

Relay
Output channels:

2
DC load range:

24 to 120 V DC
AC load range:

24 to 230 V AC
Nominal output current:

5 A per channel
Minimum load current:

8 mA
Resistive-load switching rate:

2 Hz maximum
Inductive-load switching rate:

0.5 Hz maximum
Lamp-load switching rate:

2 Hz maximum
Channel indication:

Green status LED per output
Short-circuit protection:

No
Configured stop response:

Substitute value or keep last value

View as PDF Ask for Quote

Information

Overview Manuals Common Applications Product Precautions

Siemens 6ES7132-4HB01-0AB0 switches two field-load circuits from an ET 200S station while keeping the output channels isolated from one another, the backplane bus and the load supply.

Provides two relay output channels.
Switches DC and AC load circuits within the specified voltage ranges.
Supports configured substitute values after a controller stop.
Shows each output state with a green channel indicator.

Relay current, load type and switching frequency must be evaluated together. An output that is within its current rating can still exceed the permitted switching duty for an inductive load.

Important Notice: Verify contact state, channel assignment, load voltage, protective device and substitute-value behavior before reconnecting either field circuit.

Technical documents for Siemens 6ES7132-4HB01-0AB0

Siemens 6ES7132-4HB01-0AB0 Official Data Sheet (PDF)Installation and Commissioning — Siemens 6ES7132-4HB01-0AB0

The technical reference, installation and commissioning guide, and complete product information PDF cover different scopes for this exact model.

Motor-control auxiliaries

Switch approved contactor or interposing-relay circuits.

Valve and actuator commands

Control two independently wired field loads.

Mixed AC/DC output stations

Use the relay contacts with a correctly engineered load circuit.

Controlled fallback states

Apply substitute or retained values after controller stop.

Treat each relay path in Siemens 6ES7132-4HB01-0AB0 as an independently protected field circuit.

Identify both relay channels and their load circuits before disconnection.

Confirm each field voltage is within the specified AC or DC range.

Size external circuit protection because the outputs are not short-circuit protected.

Check inrush and switching duty for the actual load type.

Observe the lower switching-frequency limit for inductive loads.

Restore the configured substitute-value behavior before energizing.

Prove the field load changes state instead of relying only on the green LED.

Verify galvanic isolation and safe contact state before release.

Technical notes

Test the command bit, relay contact and field load as separate stages. Record the selected response to CPU or master stop with the output acceptance result.

FAQ View All FAQ

Which load voltages can Siemens 6ES7132-4HB01-0AB0 switch?

Its relay contacts are specified for 24–120 V DC loads or 24–230 V AC loads.
How many field circuits does Siemens 6ES7132-4HB01-0AB0 control?

It provides two independently addressed relay output channels.
What continuous current is assigned to each Siemens 6ES7132-4HB01-0AB0 output?

Each relay channel is rated for 5 A under the specified operating conditions; the minimum load current is 8 mA.
Why is an external protective device needed with Siemens 6ES7132-4HB01-0AB0?

The outputs do not include short-circuit protection, so the field circuit needs the correctly coordinated external protection.

How often may Siemens 6ES7132-4HB01-0AB0 switch an inductive load?

The specified maximum switching rate for inductive loads is 0.5 Hz, lower than the 2 Hz limit for resistive or lamp loads.
What can Siemens 6ES7132-4HB01-0AB0 do when the CPU or master stops?

The configured response can apply a substitute value or retain the last value; the selected behavior must match the machine safety design.
What do the green indicators on Siemens 6ES7132-4HB01-0AB0 show?

Each green channel LED indicates the commanded output state; it does not by itself prove that the relay contact or field load changed state.
How should both channels of Siemens 6ES7132-4HB01-0AB0 be commissioned?

Command one output at a time, measure the contact and field-load response, verify electrical isolation and protection, then test the configured stop-state behavior.

Manufacturers

Supporting new and legacy automation

Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.

Please try to be as accurate as possible with your search.
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
We can't find any results for “”.