Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 5136-DNS-200S
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 5136-DNS-200S
-
Manufacturer:Siemens
-
Product Category:PLC Systems
-
Spare Part Number:5136-DNS-200S
-
Estimated shipping dimensions:12.7×7.6×5.1cm
-
Weight:0.1 kg
-
Tariff Code:8537101190
-
Counliy of origin:Germany
-
Module type:DeviceNet slave adapter
-
I/O system:SIMATIC ET 200S
-
Bus protocol:DeviceNet
-
Transmission rates:125 / 250 / 500 kbaud
-
Network connector:5-pin DeviceNet
-
Electronics supply:24 V DC, Class 2
-
DeviceNet supply:11-25 V DC
-
DeviceNet current:75 mA maximum
-
Input current, 63 modules:250 mA maximum at 24 V DC
-
Input current, no bus modules:125 mA maximum at 24 V DC
-
Typical power dissipation:3.8 W
-
Expansion modules:63 maximum
-
I/O address space:244 bytes input and 244 bytes output
-
Configuration modes:Automatic or user configured
-
Module replacement:Expansion-module hot swap supported
-
Status indication:Module, network and I/O red/green LEDs
-
Isolation:DeviceNet isolated from adapter electronics
-
Insulation test:500 V DC
Information
Overview
Manuals
Common Applications
Product Precautions
Within a SIMATIC ET 200S station, Siemens 5136-DNS-200S manages the DeviceNet node identity, adapter data exchange and expansion-module configuration while reporting module, network and I/O status.
- 5136-DNS-200S
- DeviceNet slave adapter
- SIMATIC ET 200S
- DeviceNet
Retain the exact installed identity, companion hardware and configuration record. Verify DeviceNet communication and expansion-I/O control in a matched ET 200S station under controlled conditions before release.
Important Notice: Match 5136-DNS-200S to every retained connection, setting and acceptance result before replacement.
Siemens 5136-DNS-200S Manuals & Downloads
Siemens 5136-DNS-200S Official Manual Excerpt (PDF)Siemens 5136-DNS-200S Installation & Commissioning Guide (PDF)
The official excerpt retains five exact-model pages from the supplied Siemens manual; the field guide separately organizes the verified supply, network, configuration, diagnostic and acceptance checks.
DeviceNet remote I/O
Connects an ET 200S station to a DeviceNet scanner while retaining the documented node and data rate.
User-configured I/O mapping
Supports a controlled input/output layout when AutoConfig is disabled and the retained map is restored.
Maintenance hot swap
Allows documented expansion-module replacement while the adapter maintains the station relationship.
Status-led diagnostics
Uses module, network and I/O indicators to separate adapter, bus and field-data conditions.
Apply these checks to the exact Siemens 5136-DNS-200S installation before returning the affected equipment to service.
1
Confirm the complete 5136-DNS-200S marking, DeviceNet node and installed ET 200S station before work.
2
Place the controller and field equipment in the approved maintenance state, then isolate and prove every affected circuit safe.
3
Record the node address, data rate, DIP-switch positions, module order and configuration mode before removal.
4
Verify the 24 V DC Class 2 electronics supply and the separate 11-25 V DC DeviceNet supply before reconnection.
5
Restore the five-pin DeviceNet connector with the documented polarity, shielding and trunk/drop arrangement.
6
Reinstall expansion modules in the recorded order and restore the retained automatic or user-configured I/O map.
7
Follow the documented power sequence before relying on automatic configuration or replacing a module under power.
8
Check module, network and I/O LEDs, exchange every configured byte and clear hot-swap or configuration mismatch diagnostics before release.
Technical notes
Match 5136-DNS-200S to the complete installed record. Preserve the host position, connections, settings and companion hardware; after replacement, verify DeviceNet communication and expansion-I/O control in a matched ET 200S station under controlled conditions.
FAQ View All FAQ
-
What network role does Siemens 5136-DNS-200S perform in an ET 200S station?It operates as the DeviceNet slave adapter between the network scanner and the station's ET 200S expansion modules.
-
Which DeviceNet data rates can Siemens 5136-DNS-200S use?The documented transmission rates are 125, 250 and 500 kbaud.
-
How many expansion modules can Siemens 5136-DNS-200S operate?The adapter supports a documented maximum of 63 expansion modules within the station limits.
-
What input and output address capacity does Siemens 5136-DNS-200S support?It supports up to 244 input bytes and 244 output bytes.
-
How are configuration modes handled by Siemens 5136-DNS-200S?The adapter can use automatic configuration or a retained user configuration selected for the installed I/O arrangement.
-
What status indications are available on Siemens 5136-DNS-200S?Red/green indicators report module, network and I/O status so adapter, bus and data conditions can be separated.
-
Does Siemens 5136-DNS-200S support expansion-module hot swap?Yes. Documented module hot swap is supported when the required power sequence and configuration rules are followed.
-
What must be checked after installing Siemens 5136-DNS-200S?Verify supplies, address and data rate, module order, configuration, status LEDs and the complete configured input/output exchange.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.