Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 6ES7 153-2BA82-0XB0
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 6ES7 153-2BA82-0XB0
-
Manufacturer:Siemens
-
Product Category:PLC Systems
-
Spare Part Number:6ES7 153-2BA82-0XB0
-
Estimated shipping dimensions:4x11.5x12.5cm
-
Weight:0.24 kg
-
Tariff Code:8537101190
-
Counliy of origin:Germany
-
System family:SIMATIC ET 200M
-
Interface type:IM 153-2 HF
-
Fieldbus:PROFIBUS DP
-
Supported modules per station:Up to 12 S7-300 modules
-
Isochronous mode:Supported
-
HART scope:Expanded secondary-variable support
-
High-density operation:64-channel modules; 32 signals per slot
Information
Overview
Manuals
Common Applications
Product Precautions
Siemens 6ES7 153-2BA82-0XB0 provides the high-feature IM 153-2 PROFIBUS DP interface for modular ET 200M and applicable link stations.
- Connects an ET 200M station to PROFIBUS DP.
- Supports up to 12 S7-300 modules in the documented station arrangement.
- Provides redundancy, timestamping and isochronous-mode functions.
- Supports expanded HART secondary variables and 64-channel module operation.
The interface module serves a defined role in its documented SIMATIC system. Match the rack, interfaces, configuration and program safeguards before the controlled system returns to service.
Important Notice: Verify the complete Siemens 6ES7 153-2BA82-0XB0 marking, system position, connector arrangement and controlled configuration before installation.
Siemens 6ES7 153-2BA82-0XB0 Manuals & Downloads
Siemens 6ES7 153-2BA82-0XB0 Technical Reference (PDF)Siemens 6ES7 153-2BA82-0XB0 Installation & Commissioning Guide (PDF)
The Technical Reference covers the product function, system role and technical selection. The installation guide covers identification, connection checks, commissioning and the acceptance record.
Distributed I/O
Connect ET 200M signal modules to a PROFIBUS DP master.
Redundant automation
Operate the documented redundant ET 200M interface arrangement.
Process instrumentation
Transfer HART secondary variables through supported modules.
Time-coordinated acquisition
Use timestamping or isochronous operation where the system configuration supports it.
Before installing Siemens 6ES7 153-2BA82-0XB0, confirm the documented system, interfaces and controlled configuration.
1
Confirm the complete 6ES7 153-2BA82-0XB0 article number and IM 153-2 HF designation.
2
Verify the ET 200M, DP/PA Link or Y Link role before replacement.
3
Back up the PROFIBUS address, station configuration and redundancy settings.
4
Record module order, bus connectors and active-backplane arrangement.
5
Apply power isolation and electrostatic-discharge controls.
6
Do not exceed the documented module and signal limits for the station.
7
Check bus fault, system fault and operating indicators after startup.
8
Verify master communication, module diagnostics and the required redundancy response.
Technical notes
Verify the complete Siemens 6ES7 153-2BA82-0XB0 marking, system position, connector arrangement and controlled configuration before installation.
FAQ View All FAQ
-
What module type is Siemens 6ES7 153-2BA82-0XB0?It is the high-feature IM 153-2 interface module.
-
Which distributed I/O family uses Siemens 6ES7 153-2BA82-0XB0?It is assigned to SIMATIC ET 200M and documented DP/PA Link and Y Link arrangements.
-
Which fieldbus connects through Siemens 6ES7 153-2BA82-0XB0?The module provides the PROFIBUS DP station interface.
-
How many S7-300 modules can Siemens 6ES7 153-2BA82-0XB0 support in the documented station?The specified arrangement supports up to 12 modules.
-
Which synchronization and event functions are available on Siemens 6ES7 153-2BA82-0XB0?The module supports isochronous operation and timestamping in suitable configurations.
-
What should be saved before replacing Siemens 6ES7 153-2BA82-0XB0?Save the station, address, redundancy and module configuration.
-
What completes commissioning of Siemens 6ES7 153-2BA82-0XB0?Verify master communication, module diagnostics, process data and redundancy behavior where used.
-
Which installation records should accompany Siemens 6ES7 153-2BA82-0XB0?Record the complete article number, interface module position, connections, controlled settings and functional test result.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.