Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for C98043-A7011-L6
For more information on how your data is processed and stored by Apterpower please read our privacy policy
-
Match the complete marking
Include C98043-A7011-L6 and any hardware revision or assembly markings visible on the item. Keep the complete reference on your enquiry and quotation.
-
Check the offered item before ordering
Request available label, connector and mounting photos. Have your maintenance team compare the offered C98043-A7011-L6 with the installed equipment and applicable Siemens documentation.
Technical specifications for C98043-A7011-L6
-
Manufacturer:Siemens
-
Product Category:Servo Drives
-
Spare Part Number:C98043-A7011-L6
-
Weight:0.3 kg
-
Tariff Code:8537101190
-
Product type:RC snubber board
-
Drive platform:SINAMICS DCM Base Drive
-
Service part reference:6RY17030FA10
-
Applicable converter current:450 A and 600 A configurations
-
Applicable rating table:US 480 V Base Drive range
Information
Overview
Downloads
Applications / Compatibility
Product Precautions
- The RC snubber board is a power-circuit service component whose selection follows the complete converter rating and spare-part configuration.
Product type: RC snubber board
Applicable converter range: 450 A and 600 A, US 480 V Base Drive configurations
Service reference: 6RY17030FA10
Applicable converter range: 450 A and 600 A, US 480 V Base Drive configurations
Service reference: 6RY17030FA10
Siemens C98043-A7011-L6 is an RC snubber board used within the applicable SINAMICS DCM Base Drive power-converter arrangement. Its service selection is associated with the 450 A and 600 A configurations in the US 480 V rating table. These current and voltage values identify the host converter application; they are not standalone electrical ratings for an individual board terminal or component.
The board marking is associated with service part number 6RY17030FA10. Maintenance identification should retain both the C98043-A7011-L6 board reference and the full converter MLFB and serial number. This relationship distinguishes the board from neighboring snubber-board executions used at other converter ratings and avoids treating all C98043-A7011 versions as interchangeable.
The board is a component in a complete converter and does not define a separate drive, controller or general-purpose power supply. Replacement selection must therefore consider the installed converter, circuit arrangement, board suffix and connecting hardware together. Apply the converter-specific isolation and service procedure, preserve the original connection records and complete the required inspection before returning the power stage to operation.
The board marking is associated with service part number 6RY17030FA10. Maintenance identification should retain both the C98043-A7011-L6 board reference and the full converter MLFB and serial number. This relationship distinguishes the board from neighboring snubber-board executions used at other converter ratings and avoids treating all C98043-A7011 versions as interchangeable.
The board is a component in a complete converter and does not define a separate drive, controller or general-purpose power supply. Replacement selection must therefore consider the installed converter, circuit arrangement, board suffix and connecting hardware together. Apply the converter-specific isolation and service procedure, preserve the original connection records and complete the required inspection before returning the power stage to operation.
Controller platform reference: SINAMICS DCM Base Drive. Match the board suffix and complete converter rating.
Technical downloads for Siemens C98043-A7011-L6: a manufacturer technical excerpt and an Apter Power installation and commissioning guide.
-
Siemens C98043-A7011-L6 technical reference
Original Siemens technical excerpt - PDF, 1 pages. Product-specific technical information and applicable configuration details. -
Siemens C98043-A7011-L6 installation guide
Prepared by Apter Power - PDF, 5 pages. Model identification, interface checks, configuration review and commissioning verification.
The technical reference preserves selected manufacturer pages. The installation guide is compiled by Apter Power for preparation and review; apply the original operating procedures and site controls during work.
Converter relationship: Use the board only within its matched SINAMICS DCM Base Drive configuration and converter-specific service arrangement.
Applicability boundary: The verified association covers the 450 A and 600 A entries in the US 480 V range. Other ratings or board suffixes require a separate compatibility check.
Applicability boundary: The verified association covers the 450 A and 600 A entries in the US 480 V range. Other ratings or board suffixes require a separate compatibility check.
-
450 A converter service
Identify the L6 board against the applicable 450 A Base Drive assembly and retain the complete converter marking during spare selection. -
600 A converter service
Match the L6 board to the applicable 600 A Base Drive configuration, including board connections and host assembly identity. -
Power-circuit maintenance
Review the RC snubber board as part of the converter power circuit under the converter-specific maintenance procedure. -
Spare-part identification
Use the board marking and associated service reference together to distinguish this execution from other snubber-board variants.
Match C98043-A7011-L6 to the installed hardware and approved configuration before replacement or commissioning.
Retain the L6 suffix
Do not substitute another C98043-A7011 suffix solely because its base designation is similar.
Match the host converter
Check the full converter MLFB, serial number and rating before selecting the board.
Keep rating scope clear
450/600 A and US 480 V identify the applicable converter range, not independent board terminal ratings.
Confirm the service reference
Check the 6RY17030FA10 service association against the installed converter and offered board marking.
Follow converter isolation
Use the qualified service and isolation procedure for the complete converter before accessing the power circuit.
Inspect before release
Check board identity, connections and the converter-specific service acceptance requirements before re-energizing.
Alternative Names
C98043 A7011 L6
Siemens C98043-A7011-L6
Technical notes
System relationship: Verify the complete host MLFB, serial number and applicable 450/600 A US 480 V configuration.
Applicability: The 450/600 A and US 480 V values describe applicable converter configurations, not standalone board ratings. Match the full converter MLFB, serial number and board suffix before replacement.
Technical reference: Siemens SINAMICS DCM Base Drive Panel Instructions, parts and service information.
FAQ View All FAQ
-
What type of component is C98043-A7011-L6?It is an RC snubber board used as a service component within the applicable converter power circuit.
-
Which drive platform applies to C98043-A7011-L6?The verified service association is with SINAMICS DCM Base Drive configurations.
-
Which converter current ratings are associated with C98043-A7011-L6?The applicable parts table associates this board with 450 A and 600 A Base Drive configurations.
-
Does the 480 V association define the terminal rating of C98043-A7011-L6?No. It identifies the US 480 V converter range in the parts table, not a standalone board terminal rating.
-
Which service part reference is associated with C98043-A7011-L6?The corresponding service part reference is 6RY17030FA10. Check the complete converter and board identity when selecting a replacement.
-
Can the suffix of C98043-A7011-L6 be omitted during a replacement check?No. Keep the complete L6 execution because other board suffixes are associated with different converter arrangements.
-
Is C98043-A7011-L6 a complete DC drive?No. It is a board within the converter and requires the appropriate host assembly and connecting hardware.
-
Which host information is needed to verify C98043-A7011-L6?Use the full converter MLFB, serial number, rating and installed board marking to verify the service configuration.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.