Speak to a sourcing specialist
sales13@apterpower.com
Get a quick price for MM15D-503-00
E-mail *
Mobile
Company
Content *
Quantity *
Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
For more information on how your data is processed and stored by Apterpower please read our privacy policy

What happens after you enquire

  • 1

    Requirement review

    We review the part number, quantity and delivery requirements and ask for any missing details.
  • 2

    Quotation and availability

    We confirm the proposed item, condition, availability, price and estimated lead time in the quotation.
  • 3

    Order confirmation and dispatch

    Once the quotation and purchasing details are agreed, your contact will coordinate the order and available dispatch information.

Technical specifications for MM15D-503-00

  • Manufacturer:
    SEW
  • Product Category:
    General Automation
  • Spare Part Number:
    MM15D-503-00
  • Estimated shipping dimensions:
    18x10.5x13.6cm
  • Weight:
    1.3 kg
  • Tariff Code:
    8537101190
  • Counliy of origin:
    Germany
  • Part number:
    18215033
  • Input:
    3 x 380 to 500 V AC
  • Input frequency:
    50 to 60 Hz
  • Nominal line current at 400 V:
    3.5 A AC
  • Apparent output power:
    2.8 kVA
  • Nominal output current:
    4.0 A AC
  • Motor power S1:
    1.5 kW / 2.0 hp
  • Output voltage:
    0 to line voltage
  • Output frequency:
    2 to 120 Hz
  • Frequency resolution:
    0.01 Hz
  • PWM frequency:
    4 / 8 / 16 kHz
  • Power factor:
    0.99
  • Maximum motor cable length:
    15 m with SEW hybrid cable

Information

Overview Manuals Common Applications Product Precautions
SEW-EURODRIVE MM15D-503-00 is a MOVIMOT decentralized drive inverter for a 1.5 kW motor. It provides local variable-frequency motor control in distributed machine installations.
  • Controls a decentralized three-phase gearmotor at the machine
  • Generates variable-frequency motor voltage from the industrial mains
  • Executes configured speed, direction, ramp, and control commands
  • Supports distributed conveyor and material-flow drive stations

MM15D-503-00 installs with compatible SEW gearmotor, MOVIMOT connection unit, approved hybrid motor cable, fieldbus or digital control interface in an engineered MOVIMOT MM..D decentralized drive system configuration.

The commissioning workflow covers installed-hardware matching, controlled start-up and functional verification for this movimot decentralized drive inverter.

Important Notice: Confirm the complete MM15D-503-00 marking, installed-system configuration, field connections and controlled functional test before commissioning or replacement.

Apter Power MM15D-503-00 Manuals and Guides
Apter Power MM15D-503-00 Product Technical Reference PDFApter Power MM15D-503-00 Installation and Verification PDF
The first document is an Apter Power model-specific technical reference. The second supports model-specific installation, configuration and engineering verification.
Conveyor section driveControls a decentralized three-phase gearmotor at the machine
Packaging-machine decentralized axisGenerates variable-frequency motor voltage from the industrial mains
Material-handling roller driveExecutes configured speed, direction, ramp, and control commands
Production-line gearmotor controlSupports distributed conveyor and material-flow drive stations
Read the applicable SEW-EURODRIVE installation instructions before work. Verify MM15D-503-00 and the installed MOVIMOT MM..D decentralized drive system configuration.
1Verify MM15D-503-00 and part number 18215033 before replacement.
2Lock out the three-phase mains and wait for the DC link to discharge.
3Confirm motor voltage, current, connection, and braking arrangement.
4Use the approved connection unit, seals, and cable glands.
5Preserve address, control source, ramp, and frequency settings.
6Check protective earth and hybrid-cable screen termination.
7Test direction and current with the driven load mechanically safe.
8Prove fieldbus commands, fault reset, braking, and emergency-stop behavior.

Technical notes

Confirm the motor nameplate and 380-500 V supply, set the inverter for the connected gearmotor, and test rotation, current, braking, communication, and protective functions before coupling the load.

FAQ View All FAQ

  • What should be checked if MM15D-503-00 reports an unstable or incorrect value?
    Check seating, supply, grounding, shielding, matched components, mechanical installation, and the signal path before changing configuration or replacing additional hardware.
  • Can MM15D-503-00 be replaced by a visually similar model without review?
    No. Verify the complete part number, electrical execution, connector arrangement, companion hardware, and approved software or rack configuration.
  • What commissioning evidence should be retained for MM15D-503-00?
    Retain the full MM15D-503-00 identity, as-left wiring and settings, measured functional-test results, final diagnostics, and authorization to return the affected equipment to service.
  • Which installed hardware must be matched before fitting MM15D-503-00?
    Match the complete MM15D-503-00 marking to compatible SEW gearmotor and MOVIMOT connection unit, then confirm the assigned MOVIMOT MM..D decentralized drive system position and approved system configuration.
  • How should the field connections for MM15D-503-00 be recorded before replacement?
    Record terminal or connector identity, polarity, shield, cable tag, channel assignment, and the as-found diagnostic state before disconnecting MM15D-503-00.
  • What isolation is required before installing MM15D-503-00?
    Place conveyor section drive in the approved maintenance state, isolate every applicable power, signal, and stored-energy source, and prove the work area safe.
  • Which configuration check is essential when commissioning MM15D-503-00?
    Restore only the approved model-specific channel, range, address, scale, or interface settings and compare them with the physical installation before enabling the process function.
  • How can an engineer function-test MM15D-503-00 after installation?
    Apply a controlled input, reference, or limited output appropriate to movimot decentralized drive inverter, observe the system indication and diagnostics, and confirm the intended process response.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
  • Whatsapp: +86 18030235313

    Send us a message.
  • sales13@apterpower.com

    Complete our online form.
  • +86 18030235313

    Speak to our team in your native language.