The TC-501-02-4M5 is an ICS Triplex Trusted 4.5 m Internal SmartSlot Input-to-FTA Cable for Trusted 8000 systems.
- Internal SmartSlot V2, 40-channel input to FTA, 4.5 m length
- Designed for the Trusted 8000 architecture
- connects a compatible Trusted 40-channel input module arrangement to its matched field termination assembly in an internal SmartSlot route
- Model-specific compatible hardware: Compatible Trusted 40-channel input modules, approved FTA, internal SmartSlot routing and matched system connectors
It connects a compatible Trusted 40-channel input module arrangement to its matched field termination assembly in an internal SmartSlot route. It handles up to forty input-channel conductors with a maximum working rating of 60 V and 2 A per channel for the -02 cable family and works with Compatible Trusted 40-channel input modules, approved FTA, internal SmartSlot routing and matched system connectors. For dependable operation, follow the official model-specific system matching, wiring, environmental and commissioning instructions.
Important Notice: Confirm the exact TC-501-02-4M5 physical nameplate, hardware revision and controlled project record before installation or replacement.
Apter Power TC-501-02-4M5 Manuals and Guides
Important Notice: These are original Apter Power reference documents based on the cited Rockwell Automation sources. Confirm the physical nameplate and current official documentation before use.
Internal input-module to FTA links
TC-501-02-4M5 connects a compatible Trusted 40-channel input module arrangement to its matched field termination assembly in an internal SmartSlot route.
Forty-channel input marshalling
TC-501-02-4M5 up to forty input-channel conductors with a maximum working rating of 60 V and 2 A per channel for the -02 cable family.
Trusted safety cabinets
TC-501-02-4M5 connects a compatible Trusted 40-channel input module arrangement to its matched field termination assembly in an internal SmartSlot route.
SmartSlot maintenance replacement
TC-501-02-4M5 up to forty input-channel conductors with a maximum working rating of 60 V and 2 A per channel for the -02 cable family.
Controlled 4.5 m cable routes
TC-501-02-4M5 connects a compatible Trusted 40-channel input module arrangement to its matched field termination assembly in an internal SmartSlot route.
Read Rockwell Automation Trusted TMR I/O SmartSlot Cables and the applicable system installation instructions before use. Verify the exact model, revision, slot or base, termination hardware and field wiring.
1
Verify the full TC-501-02-4M5 code; length and cable-family suffixes are functional ordering data.
2
Isolate the affected I/O and field circuits before disconnecting either end.
3
Route the 4.5 m cable without tight bends, crushing or connector strain.
4
Match the input module, SmartSlot position and FTA exactly to the official selection guide.
5
Perform continuity, channel mapping and diagnostic checks before service.
Videos
News
Applications
