Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 51305896-100
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 51305896-100
-
Manufacturer:Honeywell
-
Product Category:DCS Systems
-
Spare Part Number:51305896-100
-
Estimated shipping dimensions:2x13.2x23.7cm
-
Weight:0.22 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Voltage:24 Vdc (Supplied by NIM Rack)
-
Temp:32°F to 140°F
-
Rating:IP20 (Indoor industrial use)
-
Protocol:Universal Control Network (UCN)
-
Speed:5 Mbps
-
Logic Bd:Mates with 51401583-100 (EPNI)
Information
Overview
Manuals
Common Applications
Product precautions
The 51305896-100 is a NIM Modem Board (Network Interface Module) specifically designed for the TDC 3000 DCS. It functions as the physical and logical interface between the LCN (Local Control Network) and UCN (Universal Control Network). It is a mission-critical component ensuring seamless data flow from field controllers to the operator consoles, supporting full dual-channel redundancy for maximum industrial safety.
- Superior Network Bridging Integration
- High Redundancy Fault Tolerance
- Proven Industrial-Grade Stability
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Honeywell,51305896-100 PWA NIM Modem, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Oil Refining
In refineries, this board ensures operator stations receive real-time temperature and pressure data from reactor towers. It routes control commands via the UCN network to adjust heaters and pumps precisely, preventing catastrophic failures caused by process interruptions.
Thermal Power Generation
Used to monitor boiler drum levels, steam pressure, and turbine speed. It ensures the main control room can monitor generator unit status without interruption, allowing for smooth load shedding and regulation.
Offshore Oil & Gas Platforms
Harsh maritime environments make maintenance difficult. The dual-channel redundancy of the 51305896-100 ensures that oil-gas separation and water injection systems remain controlled even if one coaxial cable is damaged.
Pulp and Paper
Paper lines are extremely long and operate at high speeds. The 51305896-100 coordinates multiple field controllers to ensure consistent tension across the machine sections, preventing paper breaks.
Steel and Metallurgy
Failure of cooling systems during ironmaking is fatal. This board ensures cooling water flow and temperature data are reported in real-time to execute automated cooling strategies.
When handling the Honeywell 51305896-100 NIM Modem board, the primary concern is Electrostatic Discharge (ESD) protection，a wrist strap must be worn to prevent damage to precision circuitry. It is also critical to verify the firmware version of the mating 51401583-100 (EPNI) board to ensure compatibility with system features like SOE synchronization. As this board facilitates UCN A/B dual-redundant networks, regular inspection of the rear BNC coaxial connectors for tightness and oxidation is essential to prevent network storms or node dropouts caused by poor contact. Furthermore, before attempting a hot-swap, always ensure the system has successfully switched to redundant backup mode and verify that the selected model suffix (-100 or -200) aligns with the specific CE certification requirements of the site cabinet.
FAQ View All FAQ
-
What type of board is the 51305896-100?It is a Processor/Communication Interface Board used primarily within Honeywell’s TDC 3000, TPS, or Experion PKS ecosystems.
-
What is the primary function of the 51305896-100 in the system?It handles high-speed data exchange, executes complex control logic, and acts as a communication bridge between field I/O and the central control network.
-
Where is the 51305896-100 typically installed?It is installed in the central control cabinet, typically inserted into dedicated processor slots within a TDC 3000 or TPS Card File (Rack).
-
How to properly install or replace the 51305896-100?How to properly install or replace the 51305896-100?
-
What is the most important safety protection when using 51305896-100?Since the board integrates numerous precision integrated circuits, static discharge can cause irreversible hardware damage.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.