-
Match the complete marking
Compare M4-FAST-8-SFP with the installed label and applicable Hirschmann documentation.
-
Check the offered item before ordering
Request photos of the offered M4-FAST-8-SFP and compare markings, interfaces and included items with the installed unit.
Technical specifications for M4-FAST-8-SFP
-
Manufacturer:Hirschmann
-
Product Category:General Automation
-
Spare Part Number:M4-FAST-8-SFP
-
Weight:0.62 kg
-
Tariff Code:8537101190
-
Equipment role:Eight-Port Fast Ethernet Media Module
-
System context:Hirschmann MACH4000 modular switch platform
-
Ports:8 × 100BASE-FX SFP slots
-
Supported transceivers:M-FAST SFP-MM/LC, SM/LC, SM+/LC and LH/LC
-
Network context:Fast Ethernet fiber media module
-
Order number:943 864-001
-
Port standard:IEEE 802.3 100BASE-FX
-
Duplex modes:100 Mbit/s half or full duplex
-
Default duplex:Full duplex
-
Module format:Hot-swappable plug-in media module
-
Host slot count:Up to 2 or 4 modules, depending on MACH4000 chassis
-
Supported hosts:MACH4002-48+4G, MACH4002-24G and MACH4002-48G families
-
Maximum power:15 W for M4-FAST-SFP media module
-
Protection class:IP20
-
Laser protection:Class 1 to EN 60825-1
-
Operating temperature:0 to +60 °C with M4-AIR; 0 to +40 °C with M4-AIR-L
Information
- M4-FAST-8-SFP occupies a defined service position in the Hirschmann MACH4000 modular switch platform; selection depends on the complete marking and installed boundary.
Media selection: Use the documented M-FAST SFP type for the required fiber and link budget.
Host boundary: The plug-in media module is used in supported MACH4000 media-module positions.
Within the Hirschmann MACH4000 modular switch platform, evaluate this item together with its carrier, terminals, cables and project or hardware settings. Preserve the as-found interface map and revision evidence; a mechanically similar item is not automatically equivalent.
Commissioning should progress from identity and connection checks to controlled power-up, diagnostics and functional proof. Keep the final status, test conditions and open exceptions in the handover record.
-
Hirschmann MACH 4000 Official Manual
Official Belden Hirschmann manual - PDF. M4-FAST-8-SFP ports, supported SFP types and platform context. -
M4-FAST-8-SFP Installation & Commissioning Guide
Apter Power engineering guide - PDF, 5 pages. Replacement sequence, commissioning checks, diagnostics and acceptance evidence.
Compatibility boundary: Match the complete marking, hardware execution and installed interfaces before replacement.
-
Installed-system replacement
Compare the exact code, host position and connected interfaces with the removed item. -
Planned maintenance
Capture the as-found label, status and configuration before disturbing the installation. -
Controlled commissioning
Restore documented connections and prove the intended signal, communication or control response. -
Spare qualification
Keep revision, configuration and acceptance evidence with the spare-part record.
Check every token in M4-FAST-8-SFP against the offered label and approved record.
Follow the site procedure for stored energy, field power and electrostatic handling.
Photograph and label carriers, terminals, cables and keying before removal.
Archive applicable Hirschmann MACH4000 modular switch platform settings before replacement.
Check connectors, terminal blocks, carriers and cable condition before blaming the module.
Use an approved functional test and retain as-left diagnostic and acceptance evidence.
Alternative Names
Technical notes
Pre-purchase checks: Match the offered M4-FAST-8-SFP nameplate, module position and hardware execution with the installed Hirschmann MACH4000 record.
Media-module pairing: Verify the eight 100BASE-FX SFP slots, approved transceiver types and host media-module position before replacement. SFP modules and fiber assemblies referenced in technical information are not automatically included in the supply.
Quotation confirmation: Confirm available quantity, estimated dispatch date, lead-time starting event, included items and documents in writing. Country of origin: Germany. Condition: New, original product. Supply scope: Confirmed in quotation.
FAQ View All FAQ
-
How should M4-FAST-8-SFP be identified before a replacement is approved?Compare every token in the complete marking, installed position and documented eight-port fast ethernet media module role. Confirm the physical label before approval.
-
What evidence should be retained before removing M4-FAST-8-SFP?Record the mounting position, connected interfaces, status indications and current Hirschmann MACH4000 modular switch platform configuration. Photograph the complete label before disconnection.
-
How should the interfaces for M4-FAST-8-SFP be checked during installation?Map each connector, terminal and cable to the as-found record and applicable manufacturer documentation. Preserve keying and shielding arrangements.
-
What configuration boundary matters when commissioning M4-FAST-8-SFP?Use the approved Hirschmann MACH4000 modular switch platform record and exact hardware execution. Physical fit alone does not prove configuration or interface equivalence.
-
How can a suspected M4-FAST-8-SFP fault be separated from wiring or carrier faults?Verify supply and reference conditions, then inspect mating hardware and external wiring. Use controlled substitution only after both signal paths are documented.
-
What should be verified after fitting M4-FAST-8-SFP?Confirm normal indications, communication or signal continuity and the intended controlled-system response under an approved test state.
-
Can M4-FAST-8-SFP be replaced by a similar-looking assembly?No direct equivalence is established by appearance. Compare the complete code, revision, interface execution and installed configuration.
-
What handover record is appropriate after work on M4-FAST-8-SFP?Retain offered and removed markings, connection photographs, configuration evidence, diagnostics, functional-test results and unresolved exceptions.
Supporting new and legacy automation
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
Related cases and sourcing guidance
View all case studiesYou May Also Like
Product Browsing History
-
M4-FAST-8-SFPProduct Details -
KF-5-10Product Details -
BKDC-16-0045Product Details -
PR6423/01K-010 CON021Product Details -
PR6423/010-010Product Details -
PR9268/203-000Product Details -
PR6423/015-040 CON021Product Details -
SNAP-AIMA-IProduct Details -
RD-323MSProduct Details -
2SY5016-2SB00Product Details
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.




