The KF-5-10 is a classic micro-loop control actuator manufactured by DAIKIN Hydraulics of Japan. It is often used as a core control board in conjunction with DAIKIN's proportional solenoid valves, directional valves, and pressure valves for precise hydraulic feedback contro
The PWM control of electrical current minimizes heat generation by the driver
The output current waveforms are set to optimize the hysteresis and resolution of solenoid operated proportional control valves
The constant current characteristics suppress the power supply voltage fluctuation, and the output current fluctuation due to temperature rise of the solenoid, to almost zero
Built by Daikin Hydraulics, this robust control system seamlessly accepts sensor signals from a valve’s differential transformer to execute real-time minor feedback corrections. By incorporating pulse width modulation (PWM) constant current driving technology, the KF-5-10 system minimizes heat generation while shielding output current against coil temperature spikes and grid voltage drops, ensuring ultimate stability in high-demand machinery.Designed to eliminate mechanical hysteresis and maximize motion resolution, the DAIKIN KF-5-10 Hydraulic Control System delivers elite-level linearity and repeatability for critical rotational and linear automation. The system features a versatile built-in dither setting, allowing field technicians to shift between High, Medium, and Low configurations directly via wire terminal terminals to match specific application fluid-dynamics.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
DAIKIN KF-5-10 Minor Loop Control Driver Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Power Generation
Drives electro-hydraulic actuators of main steam valves to regulate turbine rotational speed.
Material Handling
Adjusts proportional braking valves in high-capacity industrial lifts to ensure smooth, shock-free stopping.
Pulp & Paper
Controls hydraulic cylinders to maintain perfectly even press contact across 5-meter-wide paper rolls.
Automotive
Balances proportional pressure valves in body-panel deep drawing lines to prevent metal tearing.
Mobile Hydraulics
Integrated into hydraulic test rigs to simulate field workloads for heavy excavator multi-way valves.
Metallurgy
Manages high-flow proportional valves in hot rolling mills to maintain uniform steel sheet thickness.
When operating the DAIKIN KF-5-10, ensure the incoming AC supply voltage matches the specified rating (100V/200V/220V). Wiring to the valve's differential transformer must strictly adhere to the terminal definition to prevent board burnout. Prior to powering up, calibrate the zero-point (MIN) and full-scale (MAX) output currents using the on-board trimmer potentiometers to align with your proportional valve specifications. Additionally, maintain a well-ventilated operating environment below 55°C to prevent thermal faults in the heavy-duty power components.
The DAIKIN KF-5-10 is a minor loop (local feedback) constant-current driver amplifier specifically designed for Daikin electro-hydraulic proportional control valves (such as the LEM series).
What control principle does DAIKIN KF-5-10 use?
Uses PWM (Pulse Width Modulation) constant-current control combined with a minor closed-loop LVDT feedback, effectively overcoming the impact of coil resistance changes due to temperature variations.
What is the supply voltage for DAIKIN KF-5-10?
AC powered, supporting AC 100V, 200V, or 220V (50/60Hz), with a permitted fluctuation range within -10% to +10% of the rated voltage.
Can DAIKIN KF-5-10 be repaired if it gets damaged?
Yes. As a classic industrial controller, many professional industrial automation service providers offer inspection and component-level repair services for the DAIKIN KF-5-10.
How to troubleshoot DAIKIN KF-5-10 if the output is abnormal?
You should first check if the supply voltage and command input are normal, then calibrate the output range by adjusting the Min/Max trim potentiometers (Trimmer Adjustments) on the drive.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
Please try to be as accurate as possible with your search.
We can quote you on 1000s of specialist parts, even if they are not listed on our website.