-
Match the complete marking
Compare M-FAST SFP-MM/LC with the installed label and applicable Hirschmann documentation.
-
Check the offered item before ordering
Request photos of the offered M-FAST SFP-MM/LC and compare markings, interfaces and included items with the installed unit.
Technical specifications for M-FAST SFP-MM/LC
-
Manufacturer:Hirschmann
-
Product Category:General Automation
-
Spare Part Number:M-FAST SFP-MM/LC
-
Weight:0.04 kg
-
Tariff Code:8537101190
-
Equipment role:Multimode Fast Ethernet SFP Transceiver
-
System context:Hirschmann Fast Ethernet SFP platform
-
Part number:943865001
-
Interface:1 × 100 Mbit/s LC
-
Fiber:Multimode
-
Wavelength:1310 nm
-
50/125 µm distance:0–5000 m
-
62.5/125 µm distance:0–4000 m
-
Power consumption:1 W
-
Diagnostics:Optical input/output power and temperature
-
Protection class:IP20
-
Operating temperature:0 to +60 °C
-
Storage temperature:−40 to +85 °C
-
Relative humidity:5–95% non-condensing
-
Laser class:IEC 60825-1 Class 1
-
Mounting:SFP slot
-
MTBF at 25 °C:514 years, Telcordia SR-332 Issue 3
-
50/125 µm link budget:0-8 dB at 1310 nm
-
62.5/125 µm link budget:0-11 dB at 1310 nm
-
ESD immunity:6 kV contact; 8 kV air
-
Radiated immunity:10 V/m, 80-1000 MHz
-
Burst immunity:2 kV power line; 1 kV data line
-
Surge immunity:2 kV line-earth; 1 kV line-line; 1 kV data
-
Conducted immunity:3 V at 10-150 kHz; 10 V at 150 kHz-80 MHz
-
Emissions:EN 55022 Class A; FCC Part 15 Class A
-
Safety:EN 60950
-
Vibration:IEC 60068-2-6
-
Shock:IEC 60068-2-27, 15 g for 11 ms
Information
- M-FAST SFP-MM/LC occupies a defined service position in the Hirschmann Fast Ethernet SFP platform; selection depends on the complete marking and installed boundary.
Published reach: Up to 5 km on 50/125 µm fiber or 4 km on 62.5/125 µm fiber.
Diagnostics: Optical input power, output power and transceiver temperature are available.
Within the Hirschmann Fast Ethernet SFP platform, evaluate this item together with its carrier, terminals, cables and project or hardware settings. Preserve the as-found interface map and revision evidence; a mechanically similar item is not automatically equivalent.
Commissioning should progress from identity and connection checks to controlled power-up, diagnostics and functional proof. Keep the final status, test conditions and open exceptions in the handover record.
-
Hirschmann M-FAST SFP-MM/LC Official Data Sheet
Official Belden Hirschmann data sheet - PDF. Exact transceiver interface, optical reach and environmental data. -
M-FAST SFP-MM/LC Installation & Commissioning Guide
Apter Power engineering guide - PDF, 5 pages. Replacement sequence, commissioning checks, diagnostics and acceptance evidence.
Compatibility boundary: Match the complete marking, hardware execution and installed interfaces before replacement.
-
Installed-system replacement
Compare the exact code, host position and connected interfaces with the removed item. -
Planned maintenance
Capture the as-found label, status and configuration before disturbing the installation. -
Controlled commissioning
Restore documented connections and prove the intended signal, communication or control response. -
Spare qualification
Keep revision, configuration and acceptance evidence with the spare-part record.
Check every token in M-FAST SFP-MM/LC against the offered label and approved record.
Follow the site procedure for stored energy, field power and electrostatic handling.
Photograph and label carriers, terminals, cables and keying before removal.
Archive applicable Hirschmann Fast Ethernet SFP platform settings before replacement.
Check connectors, terminal blocks, carriers and cable condition before blaming the module.
Use an approved functional test and retain as-left diagnostic and acceptance evidence.
Alternative Names
Technical notes
Pre-purchase checks: Match the offered M-FAST SFP-MM/LC nameplate, part number 943865001 and hardware execution with the installed Hirschmann network record.
Optical-interface pairing: Verify the LC multimode fiber, 1310 nm optical path, supported reach and host SFP slot before insertion. Optical diagnostics and environmental limits apply to the exact transceiver; mating fiber and host hardware are not automatically included in the supply.
Quotation confirmation: Confirm available quantity, estimated dispatch date, lead-time starting event, included items and documents in writing. Country of origin: Malaysia. Condition: New, original product. Supply scope: Confirmed in quotation.
FAQ View All FAQ
-
How should M-FAST SFP-MM/LC be identified before a replacement is approved?Compare every token in the complete marking, installed position and documented multimode fast ethernet sfp transceiver role. Confirm the physical label before approval.
-
What evidence should be retained before removing M-FAST SFP-MM/LC?Record the mounting position, connected interfaces, status indications and current Hirschmann Fast Ethernet SFP platform configuration. Photograph the complete label before disconnection.
-
How should the interfaces for M-FAST SFP-MM/LC be checked during installation?Map each connector, terminal and cable to the as-found record and applicable manufacturer documentation. Preserve keying and shielding arrangements.
-
What configuration boundary matters when commissioning M-FAST SFP-MM/LC?Use the approved Hirschmann Fast Ethernet SFP platform record and exact hardware execution. Physical fit alone does not prove configuration or interface equivalence.
-
How can a suspected M-FAST SFP-MM/LC fault be separated from wiring or carrier faults?Verify supply and reference conditions, then inspect mating hardware and external wiring. Use controlled substitution only after both signal paths are documented.
-
What should be verified after fitting M-FAST SFP-MM/LC?Confirm normal indications, communication or signal continuity and the intended controlled-system response under an approved test state.
-
Can M-FAST SFP-MM/LC be replaced by a similar-looking assembly?No direct equivalence is established by appearance. Compare the complete code, revision, interface execution and installed configuration.
-
What handover record is appropriate after work on M-FAST SFP-MM/LC?Retain offered and removed markings, connection photographs, configuration evidence, diagnostics, functional-test results and unresolved exceptions.
Supporting new and legacy automation
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
Related cases and sourcing guidance
View all case studiesYou May Also Like
Product Browsing History
-
M-FAST SFP-MM/LCProduct Details -
M00279-3266-140Product Details -
G128-0001Product Details -
SYS68K-CPU-30BE16-REV-3Product Details -
PR6423/018-140 CON021Product Details -
PR6424/014-140 CON021Product Details -
E-ME-T-01HProduct Details -
ARP-2610APProduct Details -
P2HZX1Product Details -
IOP301Product Details
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.




