With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The 16925-60 is a 60-foot (18.3 meters) 3-conductor signal transmission cable developed to maintain absolute signal integrity within critical machinery protection and condition monitoring networks. This interconnect component is configured with a 3-socket terminal at one end and standard connection lugs at the other, providing low-resistance electrical pathways and efficient field wiring.
Lossless dynamic data transmission for 330400 & 330425 accelerometers
High-coverage shielding for advanced industrial EMI/RFI suppression
Standardized connectors for rapid commissioning, deployment, and maintenance
This premium shielded cable serves as the primary electrical interface for high-performance casing accelerometers, specifically the 330400 and 330425 models. These accelerometers are utilized in critical industrial processes where casing acceleration measurements are required, such as gear mesh monitoring. The 16925-60 cable accurately conveys precise dynamic voltage data from the 330400 (which meets the requirements of American Petroleum Institute Standard 670 with a 50 g peak amplitude range and a 100 mV/g sensitivity rating) and the 330425 (which features a larger 75 g peak amplitude range and a 25 mV/g sensitivity rating).
Equipped with high-coverage electrical shielding to suppress electromagnetic interference (EMI) and signal attenuation over long distances, this 60-ft wiring component ensures that critical vibration metrics successfully reach monitoring modules or monitoring systems across challenging industrial environments like gas turbines, compressors, and high-speed pumps.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 16925-60 Interconnect Cable Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Oil & Gas
On offshore drilling platforms and in oil refineries, the cable transmits lossless signals from casing accelerometers on large centrifugal compressors to machinery protection systems to monitor high-frequency unbalance.
Thermal Power
In heavy-duty gas and steam turbine trains, this cable stably conveys casing vibration data under harsh environments up to 121°C, preventing bearing pedestal failures caused by thermal expansion or misalignment.
Hydroelectric Power
Used to connect vibration monitoring sensors on the upper and lower guide bearings of hydro-generator sets, continuously collecting low-frequency mechanical shocks and casing acceleration electrical signals.
Steel & Metallurgy
On heavy-duty gearboxes of large hot rolling mills, the stainless steel armored cable routes high-frequency gear mesh vibration signals back to monitoring modules to prevent production stops from broken teeth.
Mining & Extraction
On heavy-load drive bearing housings of massive crushers, ball mills, and long-distance conveyors, its rugged jacket resists ore dust and physical impacts to secure continuous online monitoring.
Wind Power
Installed at high-speed gearboxes and main generator bearings inside wind turbine nacelles, it transmits weak dynamic voltage vibration signals across 60-ft distances to prevent false alarms at the tower top.
When using the 16925-60 armored cable, first ensure that its connector is tightly threaded to the 330400 or 330425 sensor to prevent loose contact caused by operational vibration. Although the cable is protected by external stainless steel armor, routing must still avoid overly sharp metal corners, and the bend radius must not be less than 51 mm.
To maintain high signal quality, the overall cable shield must be reliably grounded at a single end inside the monitoring enclosure; two-end grounding is strictly prohibited to avoid ground loop interference. Additionally, this cable does not feature a fluorosilicone elastomer boot, so it cannot be used in environments with direct spraying of highly corrosive chemicals.
Alternative Names
Alternative Names
16925 60I6925-6016925-6OI6925-6O
Technical notes
Technical notes
This 60-foot, 22 AWG shielded 3-wire cable is required for permanent machinery monitoring loops utilizing Bently Nevada 330400/330425 sensors. Protected by a stainless steel jacket, the assembly provides a 3-socket plug for transducer attachment and terminal lugs for monitoring system integration, operating across temperatures from -55°C to +121°C. It natively supports both 50g and 75g acceleration metrics, with an allowable total length up to 99 feet.
The 16925-60 is a high-quality armored interconnect cable with a length of 60 feet (18.3 meters), specifically designed for use with Bently Nevada 330400 and 330425 accelerometers.
What is the purpose of the stainless steel armor on the 16925-60?
The armored construction provides excellent resistance to crushing, abrasion, and mechanical damage in harsh industrial environments.
What is the primary use of the 16925-60 in a system?
It is primarily used to offer substantial reach for connecting field accelerometers to remote monitoring panels.
How does the 16925-60 ensure reliable signal transmission?
It uses shielded twisted conductors to minimize electromagnetic interference from nearby motors, variable frequency drives, and other electrical equipment.
Which machinery monitoring applications is the 16925-60 suitable for?
It is suitable for permanent installation in machinery monitoring applications such as gear mesh detection, compressor casing vibration, and turbine acceleration measurement.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
