The 330910-00-05-10-02-00 is a non-contact eddy current proximity probe that belongs to the Bently Nevada 3300 XL NSv series. This specific model features an M10 x 1 metric threaded body designed for installation in machinery with restricted counterbore and tight physical space. It is configured with a 0 mm unthreaded length (fully threaded case) and a 50 mm overall case length, making it ideal for monitoring small shaft targets under 51 mm (2 inches) where standard 8 mm probes suffer from sideview wall interference.
Axial (thrust) position measurements
Phase reference (Keyphasor signals)
Tachometer and zero speed measurements
The hardware is equipped with an integrated 1.0-meter (39 inches) standard coaxial cable terminating in a miniature coaxial ClickLoc connector. Operating as part of the 3300 XL NSv transducer system, the probe delivers an average scale factor of 7.87 V/mm (200 mV/mil) over a 1.5 mm (60 mils) linear measurement range. This unapproved hardware variant (indicated by the -00 approval option) does not carry hazardous area certifications and is designed for general purpose industrial locations.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 330910-00-05-10-02-00 Proximity Probe Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Oil and Gas Exploration
Monitors shaft vibration of small gas compressors on offshore platforms to prevent downtime.
Petrochemical Refining
Measures the axial displacement of small high-speed turbine-driven pumps in catalytic cracking units.
Air Separation Industry
Measures radial shaft vibration of ultra-high-speed centrifugal air compressors in air separation units.
Thermal Power Generation
Monitors rotor position and mechanical condition on the turbine drive-end of boiler feedwater pumps.
Nuclear Power Generation
Used for bearing vibration monitoring of small closed-cycle cooling water pumps in auxiliary safety systems.
Iron and Steel Metallurgy
Monitors small shaft systems of blast furnace blowers and Top Gas Recovery Turbine (TRT) power units.
330910-00-05-10-02-00 requires a 9.5 mm minimum side spacing to avoid cross-talk, must pair with a dedicated cable and Proximitor without changing the total channel length (5m/7m), and demands precise midpoint voltage positioning due to its tight 1.5 mm linear range.
This product targets tight physical environments where standard sensors cannot be installed. The magnetic field radiation range of its internal high-frequency coil is constrained, specifically handling operating conditions with narrow target surfaces or close probe mounting clearances.
Measures axial displacement and radial vibration of high-speed small shafts.
What is the case length -05 of 330910-00-05-10-02-00?
Indicates an overall case length of 50 mm.
What connector option -02 does 330910-00-05-10-02-00 use?
A miniature coaxial ClickLoc connector.
How to physically mount 330910-00-05-10-02-00?
Secured into the machinery casing via its integrated M10 x 1 threads.
Do you offer global delivery services?
yes. We ship globally, and we are able to quickly deliver parts globally to any corner of the world. Unless otherwise specified, we will ship your order via (DHL). We can also ship through FedEx, UPS, and TNT. We can also use your account.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
Please try to be as accurate as possible with your search.
We can quote you on 1000s of specialist parts, even if they are not listed on our website.