Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for X20CP1584
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for X20CP1584
-
Manufacturer:B&R
-
Product Category:PLC Systems
-
Spare Part Number:X20CP1584
-
Tariff Code:8537101190
-
Counliy of origin:Austria
-
Processor:Intel Atom E620T; 0.6 GHz
-
Main memory:256 MB DDR2 SDRAM
-
Nonvolatile memory:1 MB SRAM
-
Application storage:CompactFlash slot 1
-
Shortest task class:400 us
-
Interfaces:RS232; Ethernet; POWERLINK; 2 USB; X2X Link
Information
Overview
Manuals
Common Applications
Product Precautions
B&R X20CP1584 is x20 controller with integrated powerlink. It executes machine-control applications and coordinates local X20 I/O plus Ethernet and POWERLINK communication.
- Uses an Intel Atom E620T processor
- Provides 256 MB DDR2 application memory
- Integrates POWERLINK and X2X Link
- Supports CompactFlash application storage
X20CP1584 operates with X20 bus base and I/O slices, 24 V DC controller supply, CompactFlash application media, Automation Studio project.
Engineered applications include Packaging-machine control, POWERLINK motion coordination, Distributed X20 I/O control, Controller replacement.
Important Notice: Back up the Automation Studio project and CompactFlash image, then verify interface addresses, POWERLINK node assignments and cycle timing.
Apter Power X20CP1584 Manuals and Guides
Apter Power X20CP1584 Product and System Technical Reference PDFApter Power X20CP1584 Installation and Commissioning Workbook PDFThe first document presents model-specific engineering data. The second provides a separate installation, connection, commissioning and acceptance workflow.
Packaging-machine control
Executes cyclic machine logic and diagnostics.
POWERLINK motion coordination
Coordinates deterministic drive and remote-I/O traffic.
Distributed X20 I/O control
Manages local and distributed X20 channels.
Controller replacement
Restores the documented application and communication identity.
Read the applicable B&R instructions before work. Verify X20CP1584 and the installed B&R X20 PLC configuration.
1
Verify the full X20CP1584 marking and its assigned B&R X20 PLC position before work.
2
Place the connected machine or process in the approved maintenance state.
3
Isolate the applicable supply and plc logic, ethernet/powerlink data and x20 i/o field energy before disconnecting conductors.
4
Record connector, conductor, address and software identities before removal.
5
Use ESD controls and protect keyed interfaces, exposed contacts and electronic assemblies.
6
Confirm the installed X20 bus base and I/O slices and 24 V DC controller supply against the approved project.
7
Restore power in a controlled sequence and review device, network and host diagnostics.
8
Prove the intended packaging-machine control function and retain the final test result.
Technical notes
Back up the Automation Studio project and CompactFlash image, then verify interface addresses, POWERLINK node assignments and cycle timing.
FAQ View All FAQ
-
Which installed system position is intended for X20CP1584?Install X20CP1584 only in the documented B&R X20 PLC position and verify the complete catalog marking against the approved hardware list.
-
What signal or controlled function does X20CP1584 handle?Its documented duty is plc logic, ethernet/powerlink data and x20 i/o; the official record lists main memory as 256 MB DDR2 SDRAM.
-
Which companion hardware must be matched to X20CP1584?Match X20CP1584 with X20 bus base and I/O slices and 24 V DC controller supply, including the documented carrier, cable and project identity.
-
Which electrical value must be verified before wiring X20CP1584?Verify application storage: CompactFlash slot 1. Do not transfer limits from another catalog number.
-
How should the configuration be preserved when replacing X20CP1584?Record the as-found position, conductors, addressing and software revision, then restore only the approved B&R X20 PLC configuration.
-
Which isolation and handling checks apply to X20CP1584?Isolate the documented supply and field energy, use ESD controls and protect the keyed connectors before handling X20CP1584.
-
How should an engineer commission X20CP1584?Power up in a controlled sequence, review device and host diagnostics, then prove the intended packaging-machine control function.
-
Can X20CP1584 replace a visually similar module without further checks?No automatic substitution is assumed; compare the full catalog number, interfaces, processor and approved system revision.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies-
Honeywell FC-RUSIO-3224 Delivered for an Oman Government ProjectRead case > -
GE IS420UCSBH4A: Confirm the Offered Controller and Release TermsRead case > -
Siemens TP1500 Comfort: Check the Panel and Machine ProjectRead case > -
GE IS420UCSBH4A: Confirm the Offered Controller and Release TermsRead case >
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.