Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for X20CP3585
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for X20CP3585
-
Manufacturer:B&R
-
Product Category:PLC Systems
-
Spare Part Number:X20CP3585
-
Tariff Code:8537101190
-
Counliy of origin:Austria
-
Processor:Intel Atom; 1 GHz
-
Main memory:256 MB DDR2 SDRAM
-
Modular interface slots:3
-
Interfaces:Ethernet; POWERLINK; USB
-
Application storage:CompactFlash
-
Redundancy:Supported
-
Cooling:Fanless
Information
Overview
Manuals
Common Applications
Product Precautions
B&R X20CP3585 is redundancy-capable x20 controller. It executes X20 control applications and provides three modular interface slots with support for redundant controller architectures.
- Uses a 1 GHz Intel Atom processor
- Provides three modular interface slots
- Supports redundant controller operation
- Integrates Ethernet, POWERLINK and CompactFlash
X20CP3585 operates with X20 bus base and I/O, three approved interface modules, redundancy partner controller, Automation Studio project and CompactFlash.
Engineered applications include Redundant process controller, Multi-interface machine control, POWERLINK automation cell, Controller-pair replacement.
Important Notice: Confirm active/standby roles, synchronization state, interface modules, CompactFlash image and project revision before controlled switchover testing.
Apter Power X20CP3585 Manuals and Guides
Apter Power X20CP3585 Product and System Technical Reference PDFApter Power X20CP3585 Installation and Commissioning Workbook PDFThe first document presents model-specific engineering data. The second provides a separate installation, connection, commissioning and acceptance workflow.
Redundant process controller
Runs control logic with an engineered standby partner.
Multi-interface machine control
Hosts multiple communication interfaces.
POWERLINK automation cell
Coordinates deterministic machine devices.
Controller-pair replacement
Restores one controller without breaking redundancy identity.
Read the applicable B&R instructions before work. Verify X20CP3585 and the installed B&R X20 PLC configuration.
1
Verify the full X20CP3585 marking and its assigned B&R X20 PLC position before work.
2
Place the connected machine or process in the approved maintenance state.
3
Isolate the applicable supply and redundant plc logic, communication interfaces and powerlink data field energy before disconnecting conductors.
4
Record connector, conductor, address and software identities before removal.
5
Use ESD controls and protect keyed interfaces, exposed contacts and electronic assemblies.
6
Confirm the installed X20 bus base and I/O and three approved interface modules against the approved project.
7
Restore power in a controlled sequence and review device, network and host diagnostics.
8
Prove the intended redundant process controller function and retain the final test result.
Technical notes
Confirm active/standby roles, synchronization state, interface modules, CompactFlash image and project revision before controlled switchover testing.
FAQ View All FAQ
-
Which installed system position is intended for X20CP3585?Install X20CP3585 only in the documented B&R X20 PLC position and verify the complete catalog marking against the approved hardware list.
-
What signal or controlled function does X20CP3585 handle?Its documented duty is redundant plc logic, communication interfaces and powerlink data; the official record lists main memory as 256 MB DDR2 SDRAM.
-
Which companion hardware must be matched to X20CP3585?Match X20CP3585 with X20 bus base and I/O and three approved interface modules, including the documented carrier, cable and project identity.
-
Which electrical value must be verified before wiring X20CP3585?Verify interfaces: Ethernet; POWERLINK; USB. Do not transfer limits from another catalog number.
-
How should the configuration be preserved when replacing X20CP3585?Record the as-found position, conductors, addressing and software revision, then restore only the approved B&R X20 PLC configuration.
-
Which isolation and handling checks apply to X20CP3585?Isolate the documented supply and field energy, use ESD controls and protect the keyed connectors before handling X20CP3585.
-
How should an engineer commission X20CP3585?Power up in a controlled sequence, review device and host diagnostics, then prove the intended redundant process controller function.
-
Can X20CP3585 replace a visually similar module without further checks?No automatic substitution is assumed; compare the full catalog number, interfaces, processor and approved system revision.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.