Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for X20CP1483
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for X20CP1483
-
Manufacturer:B&R
-
Product Category:PLC Systems
-
Spare Part Number:X20CP1483
-
Estimated shipping dimensions:15.3x8x10.1cm
-
Weight:0.66 kg
-
Tariff Code:8537101190
-
Counliy of origin:Austria
-
Processor:Intel x86 compatible; 100 MHz
-
Interfaces:Ethernet; POWERLINK; USB
-
Interface slots:1 modular slot
-
Application storage:CompactFlash
-
Cooling:Fanless
Information
Overview
Manuals
Common Applications
Product Precautions
B&R X20CP1483 is x20 compact controller. It provides compact PLC execution with integrated Ethernet, POWERLINK and X20 I/O coordination.
- Uses a 100 MHz Intel-compatible CPU
- Integrates Ethernet and POWERLINK
- Provides one modular interface slot
- Stores the application on CompactFlash
X20CP1483 operates with X20 bus base and slices, CompactFlash application media, POWERLINK devices, Automation Studio project.
Engineered applications include Compact machine controller, Distributed I/O coordinator, POWERLINK equipment control, Installed-base CPU renewal.
Important Notice: Back up the CompactFlash and Automation Studio project; preserve Ethernet, POWERLINK and interface-module settings before replacement.
Apter Power X20CP1483 Manuals and Guides
Apter Power X20CP1483 Product and System Technical Reference PDFApter Power X20CP1483 Installation and Commissioning Workbook PDFThe first document presents model-specific engineering data. The second provides a separate installation, connection, commissioning and acceptance workflow.
Compact machine controller
Executes compact machine sequences.
Distributed I/O coordinator
Coordinates distributed X20 stations.
POWERLINK equipment control
Integrates deterministic network devices.
Installed-base CPU renewal
Restores a legacy controller with its application image.
Read the applicable B&R instructions before work. Verify X20CP1483 and the installed B&R X20 PLC configuration.
1
Verify the full X20CP1483 marking and its assigned B&R X20 PLC position before work.
2
Place the connected machine or process in the approved maintenance state.
3
Isolate the applicable supply and plc logic plus ethernet, powerlink and x20 process data field energy before disconnecting conductors.
4
Record connector, conductor, address and software identities before removal.
5
Use ESD controls and protect keyed interfaces, exposed contacts and electronic assemblies.
6
Confirm the installed X20 bus base and slices and CompactFlash application media against the approved project.
7
Restore power in a controlled sequence and review device, network and host diagnostics.
8
Prove the intended compact machine controller function and retain the final test result.
Technical notes
Back up the CompactFlash and Automation Studio project; preserve Ethernet, POWERLINK and interface-module settings before replacement.
FAQ View All FAQ
-
Which installed system position is intended for X20CP1483?Install X20CP1483 only in the documented B&R X20 PLC position and verify the complete catalog marking against the approved hardware list.
-
What signal or controlled function does X20CP1483 handle?Its documented duty is plc logic plus ethernet, powerlink and x20 process data; the official record lists interfaces as Ethernet; POWERLINK; USB.
-
Which companion hardware must be matched to X20CP1483?Match X20CP1483 with X20 bus base and slices and CompactFlash application media, including the documented carrier, cable and project identity.
-
Which electrical value must be verified before wiring X20CP1483?Verify application storage: CompactFlash. Do not transfer limits from another catalog number.
-
How should the configuration be preserved when replacing X20CP1483?Record the as-found position, conductors, addressing and software revision, then restore only the approved B&R X20 PLC configuration.
-
Which isolation and handling checks apply to X20CP1483?Isolate the documented supply and field energy, use ESD controls and protect the keyed connectors before handling X20CP1483.
-
How should an engineer commission X20CP1483?Power up in a controlled sequence, review device and host diagnostics, then prove the intended compact machine controller function.
-
Can X20CP1483 replace a visually similar module without further checks?No automatic substitution is assumed; compare the full catalog number, interfaces, processor and approved system revision.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.