Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 7CP474.60-1
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 7CP474.60-1
-
Manufacturer:B&R
-
Product Category:PLC Systems
-
Spare Part Number:7CP474.60-1
-
Tariff Code:8537101190
-
Counliy of origin:Austria
-
SRAM:100 kB
-
FlashPROM:512 kB
-
Supply:24 V DC
-
Power consumption:12.6 W
-
Interfaces:RS232; CAN
-
CAN:Electrically isolated; network-capable
-
Expansion:4 screw-in module slots
-
Maximum I/O:208 digital; 80 analog
Information
Overview
Manuals
Common Applications
Product Precautions
B&R 7CP474.60-1 is system 2003 compact cpu. It executes compact System 2003 applications and coordinates local I/O through serial, isolated CAN and screw-in interface modules.
- Provides 100 kB SRAM and 512 kB FlashPROM
- Coordinates up to 208 digital I/O points
- Coordinates up to 80 analog I/O points
- Integrates isolated network-capable CAN
7CP474.60-1 operates with System 2003 rack and I/O, 24 V DC supply, approved screw-in modules, Automation Studio application backup.
Engineered applications include Compact System 2003 controller, Mixed digital/analog machine I/O, CAN equipment integration, CPU service replacement.
Important Notice: Back up program and retained data, record screw-in modules and I/O allocation, then verify every configured channel after controlled startup.
Apter Power 7CP474.60-1 Manuals and Guides
Apter Power 7CP474.60-1 Product and System Technical Reference PDFApter Power 7CP474.60-1 Installation and Commissioning Workbook PDFThe first document presents model-specific engineering data. The second provides a separate installation, connection, commissioning and acceptance workflow.
Compact System 2003 controller
Runs compact machine sequences.
Mixed digital/analog machine I/O
Coordinates mixed local I/O.
CAN equipment integration
Exchanges data with CAN equipment.
CPU service replacement
Restores the CPU while retaining I/O addressing.
Read the applicable B&R instructions before work. Verify 7CP474.60-1 and the installed B&R System 2003 PLC configuration.
1
Verify the full 7CP474.60-1 marking and its assigned B&R System 2003 PLC position before work.
2
Place the connected machine or process in the approved maintenance state.
3
Isolate the applicable supply and plc execution plus mixed system 2003 i/o and can data field energy before disconnecting conductors.
4
Record connector, conductor, address and software identities before removal.
5
Use ESD controls and protect keyed interfaces, exposed contacts and electronic assemblies.
6
Confirm the installed System 2003 rack and I/O and 24 V DC supply against the approved project.
7
Restore power in a controlled sequence and review device, network and host diagnostics.
8
Prove the intended compact system 2003 controller function and retain the final test result.
Technical notes
Back up program and retained data, record screw-in modules and I/O allocation, then verify every configured channel after controlled startup.
FAQ View All FAQ
-
Which installed system position is intended for 7CP474.60-1?Install 7CP474.60-1 only in the documented B&R System 2003 PLC position and verify the complete catalog marking against the approved hardware list.
-
What signal or controlled function does 7CP474.60-1 handle?Its documented duty is plc execution plus mixed system 2003 i/o and can data; the official record lists flashprom as 512 kB.
-
Which companion hardware must be matched to 7CP474.60-1?Match 7CP474.60-1 with System 2003 rack and I/O and 24 V DC supply, including the documented carrier, cable and project identity.
-
Which electrical value must be verified before wiring 7CP474.60-1?Verify power consumption: 12.6 W. Do not transfer limits from another catalog number.
-
How should the configuration be preserved when replacing 7CP474.60-1?Record the as-found position, conductors, addressing and software revision, then restore only the approved B&R System 2003 PLC configuration.
-
Which isolation and handling checks apply to 7CP474.60-1?Isolate the documented supply and field energy, use ESD controls and protect the keyed connectors before handling 7CP474.60-1.
-
How should an engineer commission 7CP474.60-1?Power up in a controlled sequence, review device and host diagnostics, then prove the intended compact system 2003 controller function.
-
Can 7CP474.60-1 replace a visually similar module without further checks?No automatic substitution is assumed; compare the full catalog number, interfaces, sram and approved system revision.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.