Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 8I0IF109.400-2
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 8I0IF109.400-2
-
Manufacturer:B&R
-
Product Category:General Automation
-
Spare Part Number:8I0IF109.400-2
-
Tariff Code:8537101190
-
Counliy of origin:Austria
-
B&R ID:0xB0E4
-
Compatible drive:ACOPOSinverter P64new
-
X2X Link ports:2
-
External I/O power:500 mW
-
Isolation:X2X Link isolated from inverter
-
Protection:IP20
-
Operating temperature:-10 to +60 degC
Information
Overview
Manuals
Common Applications
Product Precautions
B&R 8I0IF109.400-2 is x2x link interface for acoposinverter p64new. It adds an isolated two-port X2X Link interface to an ACOPOSinverter P64new drive.
- Provides two X2X Link ports
- Matches the P64new drive platform
- Isolates X2X communication from the inverter
- Uses 500 mW external I/O power
8I0IF109.400-2 operates with ACOPOSinverter P64new, X2X Link cable, B&R controller, Automation Studio drive configuration.
Engineered applications include P64new drive networking, X2X line extension, Drive control integration, Interface-board replacement.
Important Notice: Confirm the installed drive is P64new, record X2X node and port order, isolate the DC link and verify drive communication before enabling motion.
Apter Power 8I0IF109.400-2 Manuals and Guides
Apter Power 8I0IF109.400-2 Product and System Technical Reference PDFApter Power 8I0IF109.400-2 Installation and Commissioning Workbook PDFThe first document presents model-specific engineering data. The second provides a separate installation, connection, commissioning and acceptance workflow.
P64new drive networking
Connects the drive to B&R machine control.
X2X line extension
Continues an X2X line through two ports.
Drive control integration
Isolates control communication electrically.
Interface-board replacement
Restores drive network identity and diagnostics.
Read the applicable B&R instructions before work. Verify 8I0IF109.400-2 and the installed B&R ACOPOSinverter interface configuration.
1
Verify the full 8I0IF109.400-2 marking and its assigned B&R ACOPOSinverter interface position before work.
2
Place the connected machine or process in the approved maintenance state.
3
Isolate the applicable supply and isolated x2x link communication with acoposinverter p64new field energy before disconnecting conductors.
4
Record connector, conductor, address and software identities before removal.
5
Use ESD controls and protect keyed interfaces, exposed contacts and electronic assemblies.
6
Confirm the installed ACOPOSinverter P64new and X2X Link cable against the approved project.
7
Restore power in a controlled sequence and review device, network and host diagnostics.
8
Prove the intended p64new drive networking function and retain the final test result.
Technical notes
Confirm the installed drive is P64new, record X2X node and port order, isolate the DC link and verify drive communication before enabling motion.
FAQ View All FAQ
-
Which installed system position is intended for 8I0IF109.400-2?Install 8I0IF109.400-2 only in the documented B&R ACOPOSinverter interface position and verify the complete catalog marking against the approved hardware list.
-
What signal or controlled function does 8I0IF109.400-2 handle?Its documented duty is isolated x2x link communication with acoposinverter p64new; the official record lists compatible drive as ACOPOSinverter P64new.
-
Which companion hardware must be matched to 8I0IF109.400-2?Match 8I0IF109.400-2 with ACOPOSinverter P64new and X2X Link cable, including the documented carrier, cable and project identity.
-
Which electrical value must be verified before wiring 8I0IF109.400-2?Verify external i/o power: 500 mW. Do not transfer limits from another catalog number.
-
How should the configuration be preserved when replacing 8I0IF109.400-2?Record the as-found position, conductors, addressing and software revision, then restore only the approved B&R ACOPOSinverter interface configuration.
-
Which isolation and handling checks apply to 8I0IF109.400-2?Isolate the documented supply and field energy, use ESD controls and protect the keyed connectors before handling 8I0IF109.400-2.
-
How should an engineer commission 8I0IF109.400-2?Power up in a controlled sequence, review device and host diagnostics, then prove the intended p64new drive networking function.
-
Can 8I0IF109.400-2 replace a visually similar module without further checks?No automatic substitution is assumed; compare the full catalog number, interfaces, b&r id and approved system revision.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.