Which installed system position is intended for X20DO8332?

Install X20DO8332 only in the documented B&R X20 digital I/O position and verify the complete catalog marking against the approved hardware list.

What signal or controlled function does X20DO8332 handle?

Its documented duty is eight 24 v dc discrete source-output signals; the official record lists nominal voltage as 24 V DC.

Which companion hardware must be matched to X20DO8332?

Match X20DO8332 with X20 bus base and X20 terminal block, including the documented carrier, cable and project identity.

Which electrical value must be verified before wiring X20DO8332?

Verify output principle: Source. Do not transfer limits from another catalog number.

How should the configuration be preserved when replacing X20DO8332?

Record the as-found position, conductors, addressing and software revision, then restore only the approved B&R X20 digital I/O configuration.

Which isolation and handling checks apply to X20DO8332?

Isolate the documented supply and field energy, use ESD controls and protect the keyed connectors before handling X20DO8332.

How should an engineer commission X20DO8332?

Power up in a controlled sequence, review device and host diagnostics, then prove the intended solenoid command bank function.

Can X20DO8332 replace a visually similar module without further checks?

No automatic substitution is assumed; compare the full catalog number, interfaces, outputs and approved system revision.

B&R X20DO8332 Eight-channel digital output module

Name: X20DO8332
Brand: B&R
SKU: X20DO8332

X20DO8332

Eight-channel digital output module

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for X20DO8332

Manufacturer:

B&R

Product Category:

General Automation

Spare Part Number:

X20DO8332

Estimated shipping dimensions:

9.5x5.7x1.2cm

Weight:

0.02 kg

Tariff Code:

8537101190

Counliy of origin:

Austria

Outputs:

Nominal voltage:

24 V DC

Wiring:

1-wire

Output principle:

Source

Diagnostics:

Channel status and fault diagnostics

Protection:

Electronic short-circuit protection

Information

Overview Manuals Common Applications Product Precautions

B&R X20DO8332 is eight-channel digital output module. It switches eight 24 V DC source outputs for discrete actuators in an X20 station.

Provides eight digital output channels
Uses 24 V DC source-output switching
Supports compact one-wire termination
Reports channel and overload diagnostics

X20DO8332 operates with X20 bus base, X20 terminal block, 24 V DC load supply, discrete field loads.

Engineered applications include Solenoid command bank, Contactor control, Indicator and alarm outputs, Digital-output slice renewal.

Important Notice: Isolate the load supply, label every conductor and verify channel mapping, common reference and load current before controlled output testing.

Apter Power X20DO8332 Manuals and Guides

Apter Power X20DO8332 Product and System Technical Reference PDF Apter Power X20DO8332 Installation and Commissioning Workbook PDF

The first document presents model-specific engineering data. The second provides a separate installation, connection, commissioning and acceptance workflow.

Solenoid command bank

Switches pneumatic solenoids from PLC logic.

Contactor control

Commands documented contactor coils.

Indicator and alarm outputs

Drives annunciation loads within the output rating.

Digital-output slice renewal

Restores eight output points without changing addressing.

Read the applicable B&R instructions before work. Verify X20DO8332 and the installed B&R X20 digital I/O configuration.

Verify the full X20DO8332 marking and its assigned B&R X20 digital I/O position before work.

Place the connected machine or process in the approved maintenance state.

Isolate the applicable supply and eight 24 v dc discrete source-output signals field energy before disconnecting conductors.

Record connector, conductor, address and software identities before removal.

Use ESD controls and protect keyed interfaces, exposed contacts and electronic assemblies.

Confirm the installed X20 bus base and X20 terminal block against the approved project.

Restore power in a controlled sequence and review device, network and host diagnostics.

Prove the intended solenoid command bank function and retain the final test result.

FAQS

Which installed system position is intended for X20DO8332?

Install X20DO8332 only in the documented B&R X20 digital I/O position and verify the complete catalog marking against the approved hardware list.
What signal or controlled function does X20DO8332 handle?

Its documented duty is eight 24 v dc discrete source-output signals; the official record lists nominal voltage as 24 V DC.
Which companion hardware must be matched to X20DO8332?

Match X20DO8332 with X20 bus base and X20 terminal block, including the documented carrier, cable and project identity.
Which electrical value must be verified before wiring X20DO8332?

Verify output principle: Source. Do not transfer limits from another catalog number.
How should the configuration be preserved when replacing X20DO8332?

Record the as-found position, conductors, addressing and software revision, then restore only the approved B&R X20 digital I/O configuration.
Which isolation and handling checks apply to X20DO8332?

Isolate the documented supply and field energy, use ESD controls and protect the keyed connectors before handling X20DO8332.
How should an engineer commission X20DO8332?

Power up in a controlled sequence, review device and host diagnostics, then prove the intended solenoid command bank function.
Can X20DO8332 replace a visually similar module without further checks?

No automatic substitution is assumed; compare the full catalog number, interfaces, outputs and approved system revision.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

X20DO8332

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for X20DO8332

Technical specifications for X20DO8332

Information