Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 5ACPCI.ETH3-01
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 5ACPCI.ETH3-01
-
Manufacturer:B&R
-
Product Category:General Automation
-
Spare Part Number:5ACPCI.ETH3-01
-
Tariff Code:8537101190
-
Counliy of origin:Austria
-
B&R ID:0xA58B
-
Ethernet ports:3
-
Controller:Intel 82551ER
-
Connectors:Shielded RJ45
-
Data rate:10/100 Mbit/s
-
Maximum segment:100 m
-
PCI voltage:Universal 3.3/5 V
-
Card size:Half-size PCI
-
Slot:Standard 16-bit PCI
Information
Overview
Manuals
Common Applications
Product Precautions
B&R 5ACPCI.ETH3-01 is three-port pci ethernet card. It adds three independent 10/100 Mbit/s Ethernet interfaces to a compatible B&R industrial PC.
- Provides three shielded RJ45 ports
- Uses the Intel 82551ER Ethernet controller
- Supports 10/100 Mbit/s communication
- Fits a universal half-size PCI interface
5ACPCI.ETH3-01 operates with compatible B&R industrial PC, standard PCI slot, Ethernet cables and switches, operating-system network configuration.
Engineered applications include Multi-network industrial PC, Separated machine and plant networks, Service Ethernet interface, PCI network-card replacement.
Important Notice: Record adapter order, IP settings and cable destinations, isolate PC power and use ESD controls before installing the PCI card.
Apter Power 5ACPCI.ETH3-01 Manuals and Guides
Apter Power 5ACPCI.ETH3-01 Product and System Technical Reference PDFApter Power 5ACPCI.ETH3-01 Installation and Commissioning Workbook PDFThe first document presents model-specific engineering data. The second provides a separate installation, connection, commissioning and acceptance workflow.
Multi-network industrial PC
Separates control, service and supervisory networks.
Separated machine and plant networks
Adds multiple Ethernet connections to an industrial PC.
Service Ethernet interface
Provides a dedicated commissioning path.
PCI network-card replacement
Restores network interfaces and addressing.
Read the applicable B&R instructions before work. Verify 5ACPCI.ETH3-01 and the installed B&R industrial PC option configuration.
1
Verify the full 5ACPCI.ETH3-01 marking and its assigned B&R industrial PC option position before work.
2
Place the connected machine or process in the approved maintenance state.
3
Isolate the applicable supply and three independent 10/100 mbit/s ethernet network channels field energy before disconnecting conductors.
4
Record connector, conductor, address and software identities before removal.
5
Use ESD controls and protect keyed interfaces, exposed contacts and electronic assemblies.
6
Confirm the installed compatible B&R industrial PC and standard PCI slot against the approved project.
7
Restore power in a controlled sequence and review device, network and host diagnostics.
8
Prove the intended multi-network industrial pc function and retain the final test result.
Technical notes
Record adapter order, IP settings and cable destinations, isolate PC power and use ESD controls before installing the PCI card.
FAQ View All FAQ
-
Which installed system position is intended for 5ACPCI.ETH3-01?Install 5ACPCI.ETH3-01 only in the documented B&R industrial PC option position and verify the complete catalog marking against the approved hardware list.
-
What signal or controlled function does 5ACPCI.ETH3-01 handle?Its documented duty is three independent 10/100 mbit/s ethernet network channels; the official record lists ethernet ports as 3.
-
Which companion hardware must be matched to 5ACPCI.ETH3-01?Match 5ACPCI.ETH3-01 with compatible B&R industrial PC and standard PCI slot, including the documented carrier, cable and project identity.
-
Which electrical value must be verified before wiring 5ACPCI.ETH3-01?Verify connectors: Shielded RJ45. Do not transfer limits from another catalog number.
-
How should the configuration be preserved when replacing 5ACPCI.ETH3-01?Record the as-found position, conductors, addressing and software revision, then restore only the approved B&R industrial PC option configuration.
-
Which isolation and handling checks apply to 5ACPCI.ETH3-01?Isolate the documented supply and field energy, use ESD controls and protect the keyed connectors before handling 5ACPCI.ETH3-01.
-
How should an engineer commission 5ACPCI.ETH3-01?Power up in a controlled sequence, review device and host diagnostics, then prove the intended multi-network industrial pc function.
-
Can 5ACPCI.ETH3-01 replace a visually similar module without further checks?No automatic substitution is assumed; compare the full catalog number, interfaces, b&r id and approved system revision.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.