-
Match the complete marking
Include 2090-CSBM1DE-18AF11 and every revision or approval marking visible on the item. Keep the exact reference on your enquiry and quotation. -
Check the offered item before ordering
Request available label and interface photos. Have your maintenance team compare the offered 2090-CSBM1DE-18AF11 reference with the installed equipment and applicable Allen-Bradley documentation.
Technical specifications for 2090-CSBM1DE-18AF11
-
Manufacturer:Allen-Bradley
-
Product Category:Servo Drives
-
Spare Part Number:2090-CSBM1DE-18AF11
-
Weight:5 kg
-
Tariff Code:8537101190
-
Cable application:Kinetix 5700 single-cable motor connection
-
Conductor size:18 AWG
-
Cable construction:TPE continuous-flex
-
Cable length:11 m
-
Voltage rating:1000 V
-
Core count:8
-
Nominal outside diameter:15 mm
-
Continuous bend radius:10 x cable diameter
-
Maximum conductor temperature:105 deg C
-
Conductor material:Tinned copper
-
Motor-end interface:Single SpeedTec DIN connector
-
Drive-end interface:Prewired DSL connector kit
-
Integrated circuits:Motor power, feedback and brake conductors
Information
- 2090-CSBM1DE-18AF11 is an 11 m continuous-flex Kinetix single-motor cable carrying motor power, digital feedback and brake circuits in one assembly.
Selected length: 11 m catalog length with 18 AWG conductors and a 15 mm nominal outside diameter.
Connector set: Single SpeedTec DIN motor end and prewired drive-end DSL connector kit.
The motor end uses a Single SpeedTec DIN connector and the drive end includes the prewired DSL connector kit. Connector orientation and strain relief must be preserved because the feedback interface is integrated with the power cable.
Acceptance should include catalog-length verification, connector inspection, brake-wire identification, routing-radius measurement and drive feedback recognition after a controlled power-up.
-
Allen-Bradley 2090-CSBM1DE-18AF11 official technical excerpt
Selected manufacturer pages covering the applicable family, technical data and exact order-code fields. -
Allen-Bradley 2090-CSBM1DE-18AF11 engineering guide
Apter Power installation, configuration, diagnostic and acceptance guidance.
Platform applications: The uses below depend on the installed controller configuration and approved system design.
-
Kinetix 5700 motor axis
Connect a compatible motor to the drive with one cable for power, DSL feedback and brake wiring. -
Continuous-flex route
Use where the approved machine path requires repeated flexing within the documented bend radius. -
Brake-equipped motor
Preserve the dedicated brake conductors and their drive-side termination in the connector kit. -
Installed-cable replacement
Match the complete 18AF11 identity, connector orientation, route and 11 m length before removal.
Do not pull, twist or use the prewired connector kit as a lifting point.
Keep the continuous-flex route at or above ten times the 15 mm cable diameter.
Use approved supports and guards so the TPE jacket is not cut or crushed.
Match the Single SpeedTec DIN connector and motor catalog before connection.
Confirm brake-wire identity and termination against the drive and motor drawings.
After energization, confirm DSL feedback recognition and the absence of motor or cable faults.
Alternative Names
Technical notes
Mechanical limit: Continuous flexing requires the documented 10 x diameter bend radius and independent strain relief.
Interface limit: Both the Single SpeedTec DIN and prewired DSL kit must match the installed motor-drive pair.
Commissioning focus: Verify brake operation, DSL feedback recognition and absence of cable-related drive faults.
FAQ View All FAQ
-
What circuits are combined in 2090-CSBM1DE-18AF11?The assembly combines motor power, digital feedback and brake conductors in one Kinetix single-motor cable.
-
What is the catalog length of 2090-CSBM1DE-18AF11?The AF11 suffix selects an 11 m cable assembly.
-
What bend radius applies to 2090-CSBM1DE-18AF11 in continuous flex?Maintain at least ten times the 15 mm nominal cable diameter along the moving route.
-
Which connector is fitted at the motor end of 2090-CSBM1DE-18AF11?The motor end uses a Single SpeedTec DIN connector; confirm the mating motor interface before installation.
-
What is fitted at the drive end of 2090-CSBM1DE-18AF11?The cable has a prewired DSL connector kit at the drive end; protect its pin orientation and strain relief.
-
What conductor temperature limit is published for 2090-CSBM1DE-18AF11?The published maximum conductor temperature is 105 deg C under the stated cable conditions.
-
What should be inspected before routing 2090-CSBM1DE-18AF11?Inspect both connectors, jacket, brake conductors and supports, then measure the route and bend radius.
-
How should 2090-CSBM1DE-18AF11 be accepted on the axis?Confirm brake function, DSL feedback recognition, correct motor phasing and fault-free controlled motion.
Supporting new and legacy automation
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
Related cases and sourcing guidance
View all case studiesYou May Also Like
Product Browsing History
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.






