The Siemens SIMATIC S7-1200 6ES7223-1PL32-0XB0 is a digital input/output signal module (SM 1223) featuring 16 digital inputs (24V DC, sink/source) and 16 digital outputs (relay, 2A). It is used to expand the digital I/O capacity of S7-1200 CPUs, providing isolated, high-density I/O in a compact module.
- SIMATIC S7-1200
- SM 1223, DI 16x24 V DC, DQ 16x relay
- DIGITAL INPUT/OUTPUT MODULE
At the output end, the module is equipped with 16 relay contacts, each with a maximum rated current of 2 A. This design allows it to not only handle simple DC signals, but also directly drive high-power loads such as AC contactors, solenoid valves, or small motors. The contacts allow a wide voltage range (5V to 250V AC/DC). In addition, the module is equipped with LED status indicator lights, which can display the real-time status of each channel, greatly facilitating on-site debugging and fault diagnosis.
Important Notice:
Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Siemens 6ES7223-1PL32-0XB0 DIGITAL INPUT/OUTPUT MODULE Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Due to the use of relay output, this module is very suitable for scenarios where different voltage levels (such as AC 220V or DC 24V) or high current devices need to be controlled, but it is not recommended for high-frequency switch switching (such as high-frequency pulse control).