Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 6ES7193-7DA20-0AA0
For more information on how your data is processed and stored by Apterpower please read our privacy policy
-
Match the complete marking
Include 6ES7193-7DA20-0AA0 and any revision or assembly number visible on the item. Keep the exact reference on your enquiry and quotation.
-
Check the offered item before ordering
Request available label and connector photos. Have your maintenance team compare the offered 6ES7193-7DA20-0AA0 with the installed equipment and applicable Siemens documentation.
Technical specifications for 6ES7193-7DA20-0AA0
-
Manufacturer:Siemens
-
Product Category:PLC Systems
-
Spare Part Number:6ES7193-7DA20-0AA0
-
Weight:0.22 kg
-
Tariff Code:8537101190
-
Product series:SIMATIC ET 200iSP
-
Product type:TM-PS-A Terminal Module
-
Function:Carrier and terminal interface for power supply
-
Associated supply types:PS AC 120/230 V or PS DC 24 V, per station execution
-
Redundancy:TM-PS-B is a separate variant
-
Mounting:ET 200iSP rail; two fastening screws, 0.8–1.1 Nm
Information
Overview
Downloads
Applications / Compatibility
Product Precautions
- Siemens 6ES7193-7DA20-0AA0 is the TM-PS-A terminal module for a SIMATIC ET 200iSP station.
Station service: Preserve terminal assignment before replacement
Mechanical fit: Check the installed carrier and module engagement
Restoration: Verify supply indication and affected I/O operation
Mechanical fit: Check the installed carrier and module engagement
Restoration: Verify supply indication and affected I/O operation
Siemens 6ES7193-7DA20-0AA0 is the TM-PS-A terminal module for a SIMATIC ET 200iSP station. It provides the terminal and mounting interface for the station's corresponding power-supply module. The terminal module is a carrier and connection element, not the power supply itself.
The Siemens ET 200iSP instructions associate TM-PS-A with the PS AC 120/230 V and PS DC 24 V supply executions, subject to the station configuration and product version. A redundant arrangement uses a different terminal-module variant. The installed supply, wiring and station layout therefore need separate checks before treating another TM-PS module as equivalent.
ET 200iSP stations use this terminal position as part of their distributed I/O power architecture. It is relevant during station build, maintenance and replacement of a damaged power-supply carrier. Preserve the terminal assignment, supply type and approved station arrangement before disassembly, then check the station indication and connected I/O after restoration.
The Siemens ET 200iSP instructions associate TM-PS-A with the PS AC 120/230 V and PS DC 24 V supply executions, subject to the station configuration and product version. A redundant arrangement uses a different terminal-module variant. The installed supply, wiring and station layout therefore need separate checks before treating another TM-PS module as equivalent.
ET 200iSP stations use this terminal position as part of their distributed I/O power architecture. It is relevant during station build, maintenance and replacement of a damaged power-supply carrier. Preserve the terminal assignment, supply type and approved station arrangement before disassembly, then check the station indication and connected I/O after restoration.
Controller platform reference: SIMATIC ET 200iSP. Match the installed system and complete unit marking.
Technical downloads for Siemens 6ES7193-7DA20-0AA0: an Apter Power technical reference and installation verification guide.
-
Siemens 6ES7193-7DA20-0AA0 technical reference
Apter Power technical reference - PDF, 2 pages. Product identity, verified characteristics, system integration and selection checks. -
Siemens 6ES7193-7DA20-0AA0 installation guide
Apter Power installation verification guide - PDF, 2 pages. Identity, host configuration, inspection and functional release checks.
The technical reference summarizes verified product information. Confirm the installed configuration and use the applicable site procedures during installation and service.
ET 200iSP station application: Siemens 6ES7193-7DA20-0AA0 is the TM-PS-A terminal module for a SIMATIC ET 200iSP power-supply position. It provides the mechanical and terminal interface for a compatible station power supply.
Compatibility scope: The station execution determines whether the associated supply is PS AC 120/230 V or PS DC 24 V. TM-PS-A is a distinct terminal-module variant; the installed base and station configuration must match.
Compatibility scope: The station execution determines whether the associated supply is PS AC 120/230 V or PS DC 24 V. TM-PS-A is a distinct terminal-module variant; the installed base and station configuration must match.
-
Station power position
Mount the compatible supply execution at the designated ET 200iSP position. The terminal module establishes the supply connection path in the station. -
Distributed-I/O assembly
Use the terminal carrier as part of a configured remote I/O station. It supports the power-supply interface rather than acting as a signal I/O module. -
Terminal-position maintenance
Replace an existing TM-PS-A when the station base or terminals require service. Preserve the original station supply type and wiring. -
Variant selection
Use the full 6ES7193-7DA20-0AA0 identity to distinguish TM-PS-A from TM-PS-B. Redundancy and station architecture depend on the selected variant.
Installation and commissioning checks for Siemens 6ES7193-7DA20-0AA0. Preserve the ET 200iSP power-supply position and terminal assignments.
Confirm the terminal variant
Check 6ES7193-7DA20-0AA0 and TM-PS-A markings against the station design. Do not substitute TM-PS-B without an approved station change.
Isolate station energy
Apply the ET 200iSP installation procedure to the selected supply and connected terminals. Account for the station-area safety requirements.
Record supply wiring
Label the terminal conductors and document the fitted PS AC or PS DC execution. Keep the original polarity or AC terminal mapping.
Inspect carrier fit
Check the base, contacts, mechanical retention and mating supply interface. Fit the terminal module without damaging station connectors.
Restore station layout
Maintain the intended supply position and adjacent ET 200iSP modules. Verify that the replacement does not alter the configured station architecture.
Verify power state
After energizing, check supply indication and station diagnostics. Confirm that affected remote I/O functions return to the approved state.
Alternative Names
Siemens 6ES7193-7DA20-0AA0
6ES71937DA200AA0
Technical notes
System relationship: The Siemens ET 200iSP instructions associate TM-PS-A with the PS AC 120/230 V and PS DC 24 V supply executions, subject to the station configuration and product version. A redundant arrangement uses a different terminal-module variant. The installed supply, wiring and station layout therefore need separate checks before treating another TM-PS module as equivalent.
Applicability: The characteristics above describe the identified SIMATIC ET 200iSP execution of 6ES7193-7DA20-0AA0. Optional functions, connected devices and installed revisions must be checked against the complete marking and approved project configuration.
Technical reference: Siemens SIMATIC ET 200iSP operating instructions, TM-PS-A order code 6ES7193-7DA20-0AA0.
FAQ View All FAQ
-
What is the product type of Siemens 6ES7193-7DA20-0AA0?TM-PS-A terminal module.
-
What is the distributed i/o family of Siemens 6ES7193-7DA20-0AA0?SIMATIC ET 200iSP.
-
What is the function of Siemens 6ES7193-7DA20-0AA0?Carrier and terminal interface for power supply.
-
What is the associated supply types of Siemens 6ES7193-7DA20-0AA0?PS AC 120/230 V or PS DC 24 V, per station execution.
-
What is the redundancy of Siemens 6ES7193-7DA20-0AA0?TM-PS-B is a separate variant.
-
Which host system is appropriate for Siemens 6ES7193-7DA20-0AA0?This execution belongs to SIMATIC ET 200iSP. Match the complete installed configuration and any revision before replacement.
-
What should be preserved before replacing Siemens 6ES7193-7DA20-0AA0?Record the full label, fitted connections and approved SIMATIC ET 200iSP settings. Preserve the existing wiring and configuration record.
-
How is Siemens 6ES7193-7DA20-0AA0 checked after installation?Check diagnostics and the affected tm-ps-a terminal module functions under the approved site test procedure.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.