The Siemens 6ES7317-2EK14-0AB0 is a SIMATIC S7-300 CPU 317-2 PN/DP with 1 MB work memory, a 12 Mbit/s MPI/DP interface, and an Ethernet PROFINET interface with an integrated two-port switch.
- CPU 317-2 PN/DP
- V3.2
- 1 MB
- 24 V DC; permitted range 20.4 to 28.8 V DC
It executes larger and faster automation programs, manages central and distributed I/O, and exchanges cyclic process data and diagnostics over both PROFINET and PROFIBUS networks in coordinated machine and production-line systems.
Important Notice: Use the complete 6ES7317-2EK14-0AB0 code and verify the physical nameplate, memory card, project, and current Siemens documentation before installation or replacement.
Apter Power 6ES7317-2EK14-0AB0 Manuals and Guides
Important Notice: These are two separate Apter Power documents prepared from the manufacturer-published Siemens information named in each document. Confirm the physical nameplate, current Siemens documents, and host-system requirements before installation or replacement.
Complex machine control
Runs larger sequence, interlock, and data-handling programs
Production-line coordination
Exchanges real-time data across PROFINET and PROFIBUS segments
Distributed diagnostics
Collects device and network status for maintenance and HMI systems
Installed S7-300 performance upgrades
Supports exact CPU 317-2 PN/DP configurations during lifecycle planning
Read and follow the exact Siemens documentation and host-equipment instructions before use. Verify 6ES7317-2EK14-0AB0 from the physical nameplate.
1. Project baseline
Match firmware V3.2, hardware configuration, and the current STEP 7 archive
2. PROFINET
Verify device names, IP plan, topology, switch ports, update times, and diagnostics
3. PROFIBUS
Check DP roles, addresses, termination, cable, and station configuration
4. Memory
Preserve and verify the required Micro Memory Card before CPU replacement
5. Commissioning
Test distributed I/O, communications, and time-critical functions before production release
Videos
News
Applications
