ABB PM566-TP-ETH, order code 1SAP121500R0071, is a Classic AC500-eCo programmable logic controller processor module with 512 kB program memory, onboard mixed I/O, RS-485 communication, and Ethernet.
- Manufacturer: ABB
- Model: PM566-TP-ETH
- Order code: 1SAP121500R0071
- Product type: AC500-eCo programmable logic controller processor module
It executes cyclic and time-controlled PLC application logic, coordinates onboard and expansion I/O, and exchanges control and diagnostic data with connected devices. The module supports up to ten S500 and/or S500-eCo extension modules on its local I/O bus. Its onboard field channels comprise six 24 V DC digital inputs, six 24 V DC transistor outputs rated 0.5 A per channel, two 0...10 V analog inputs that can alternatively be configured as 24 V DC digital inputs, and one analog output configurable for 0...10 V, 0...20 mA, or 4...20 mA. COM1 supports programming, Modbus master/slave, serial ASCII, or CS31 master; optional COM2 adds RS-485 programming, Modbus, or ASCII, while Ethernet supports programming, Modbus TCP/IP, UDP/IP, the integrated web server, DHCP, FTP server, and SNTP client. Use it with the required ABB pluggable I/O terminal blocks, S500/S500-eCo expansion modules, MC503 memory option, TA561/TA562/TA569 option boards, engineering software, Ethernet infrastructure, sensors, actuators, and 24 V DC SELV/PELV supply defined for the machine or process-control panel. Within ABB's published AC500 application scope, this architecture is applicable to machine building, HVACR, metals, and water/wastewater automation when the exact I/O and communication requirements fit the module.
Important Notice: Verify PM566-TP-ETH and complete order code 1SAP121500R0071 on the physical ABB label and project bill of materials.
Apter Power PM566-TP-ETH 1SAP121500R0071 Manuals and Guides
Important Notice: The first link is the product-parameters PDF prepared only from the cited manufacturer information; the second link is the Apter Power product manual. Confirm the physical nameplate, current manufacturer documents, and host-system requirements before installation or replacement.
Compact machine control
Executes PLC logic while acquiring local switches and sensors and commanding 24 V DC transistor loads in a compact machine panel.
Mixed-signal process skid
Combines 24 V digital I/O with two 0...10 V measurements and one voltage/current command for pumps, valves, dosing, or utility equipment.
Ethernet-connected automation cell
Uses programming, Modbus TCP/IP, UDP/IP, web-server, DHCP, FTP, and SNTP functions on the documented Ethernet interface.
Expandable local and serial control station
Adds up to ten S500/S500-eCo modules and integrates RS-485 Modbus/ASCII or a CS31 master network when configured to ABB requirements.
Read and follow the current ABB documentation and host-equipment instructions before work. Verify the complete physical nameplate and system configuration.
1
Verify PM566-TP-ETH and 1SAP121500R0071 on the physical label; do not substitute PM556, PM564, or a V3 PM56xx CPU by appearance.
2
Because the article is Classic, use it for an existing documented installation and evaluate ABB's listed migration devices for new planning rather than treating them as automatic drop-in replacements.
3
Use a 24 V DC SELV/PELV supply within ABB's -15 %/+20 % tolerance and the specified 3 A fast fuse; do not exceed process or supply voltage limits.
4
De-energize and verify safe state before mounting, removing terminal blocks, opening option-board covers, or changing field wiring.
5
Use only ABB-approved 9- and 11-pole terminal blocks and verify every terminal assignment, conductor size, polarity, group supply, external fuse, and load in the exact manual.
Videos
News
Applications
