The Siemens 6ES7288-2DE16-0AA0 is a SIMATIC S7-200 SMART SM DE16 Digital Input Module that provides sixteen sink/source inputs arranged in four input groups.
- SM DE16
- 16 digital inputs, 24 V DC, sink/source
- 24 V DC nominal; 20.4 to 28.8 V DC permissible
- 45 x 100 x 81 mm
In an S7-200 SMART automation station, it acquires sixteen discrete 24 V DC sensor and contact signals for the S7-200 SMART process image. It works with the verified CPU or expansion-bus configuration, terminal blocks, field power, sensors, and actuators defined for the exact article number. The module is used in assembly fixtures, conveyor zones, alarm contacts, and dense machine-state monitoring.
Important Notice: Use the complete 6ES7288-2DE16-0AA0 code and verify the physical nameplate, current Siemens documentation, field wiring, project, and accessories before installation or replacement.
Apter Power 6ES7288-2DE16-0AA0 Manuals and Guides
Important Notice: These are two separate Apter Power documents prepared from the manufacturer-published Siemens information named in each document. Confirm the physical nameplate, current Siemens documents, and host-system requirements before installation or replacement.
Sensor status acquisition
Reads 16 discrete 24 V DC sensor or contact signals
Interlock monitoring
Brings guards, pressure switches, limit switches, and permissive contacts into the controller
Machine-state collection
Adds input density for assembly fixtures, conveyor zones, alarm contacts, and dense machine-state monitoring
Panel modernization
Expands a verified S7-200 SMART station without changing the signal type
Read the exact Siemens S7-200 SMART documentation before use. Verify 6ES7288-2DE16-0AA0, SM DE16, power, I/O wiring, terminals, and project from the physical installation.
1
Identity: Match every character of 6ES7288-2DE16-0AA0 and the SM DE16 marking to the physical nameplate and project
2
Power: Verify 24 V DC nominal; 20.4 to 28.8 V DC permissible; isolate all energy sources before wiring, insertion, or removal
3
Signals: Observe every input/output voltage, current, common, group, polarity, isolation, and protective-device limit
4
Panel: Use documented DIN-rail mounting, clearances, protective earth, cable segregation, ventilation, and IP20 enclosure protection
5
Commissioning: Back up the project, verify addresses and terminals, test one circuit group at a time, and record the results
Videos
News
Applications
