The Siemens 6ES7288-3AR04-0AA0 is a SIMATIC S7-200 SMART EM AR04 RTD Input Module that provides four module-referenced RTD/resistance channels for denser temperature acquisition.
- EM AR04
- 4 RTD or resistance-measurement inputs
- 24 V DC; 20.4 to 28.8 V DC
- 45 x 100 x 81 mm
In an S7-200 SMART automation station, it measures four compatible RTD or resistance sensor circuits and supplies 16-bit temperature or resistance values. It works with the exact CPU, expansion-bus or signal-board interface, wiring, field devices, and project configuration specified for the complete article number. It is applied in multi-zone heaters, process vessels, machine bearings, and thermal condition monitoring.
Important Notice: Use the complete 6ES7288-3AR04-0AA0 code and verify the physical nameplate, current Siemens documentation, signal range, wiring, project, and accessories before installation or replacement.
Apter Power 6ES7288-3AR04-0AA0 Manuals and Guides
Important Notice: These are two separate Apter Power documents prepared from the manufacturer-published Siemens information named in each document. Confirm the physical nameplate, current Siemens documents, and host-system requirements before installation or replacement.
RTD temperature monitoring
Measures 4 rtd or resistance-measurement inputs using Siemens-listed sensor configurations
Thermal protection
Provides temperature values for alarms, permissives, and shutdown logic
Resistance measurement
Processes compatible resistance-sensor circuits within published limits
Industrial thermal trending
Supports multi-zone heaters, process vessels, machine bearings, and thermal condition monitoring
Read the exact Siemens S7-200 SMART documentation before use. Verify 6ES7288-3AR04-0AA0, EM AR04, host system, signal type, wiring, and project from the physical installation.
1
Identity: Match every character of 6ES7288-3AR04-0AA0 and the EM AR04 marking to the physical nameplate and project
2
Host and power: Verify 24 V DC; 20.4 to 28.8 V DC; isolate all energy sources before insertion, removal, or wiring
3
Sensors: Select only Siemens-listed RTD/resistance types and match the documented 2-, 3-, or 4-wire circuit and lead-resistance limits
4
Cabling: Follow Siemens terminal, shielding, grounding, separation, and maximum cable-length instructions
5
Commissioning: Verify addresses and scaling, energize one circuit group at a time, test fail-safe behavior, and record results
Videos
News
Applications
