ABB product ID 3BHE038368R0102 is officially described as a PCBA splitter board, large, 3MVA. The requested XZC827A102 alias is not printed on ABB's exact product page and therefore remains unverified.
- ABB Product ID: 3BHE038368R0102
- Catalog Description: PCBA, SPLITTER BOARD, LARGE, 3MVA
- ABB Type Designation: Not assigned on the official page
- Requested alias: XZC827A102; nameplate or exact ABB order-record verification required
The verified function is limited to the manufacturer's splitter-board designation. The 3MVA text is part of ABB's catalog description; it must not be treated as a standalone electrical rating for the board or used to identify a host drive without exact ABB documentation. ABB does not publish the signal category, channel count, voltage, current, communication protocol, isolation, connector pinout, or routing path for this exact product page. No parameter from XZC825A102 or XZC826A102 may be reused. Publication under the combined XZC827A102 and 3BHE038368R0102 identity is on hold until a physical ABB nameplate or exact ABB order record confirms the alias. Any installation also requires the exact host bill of materials, wiring drawing, companion modules, and commissioning procedure.
Important Notice: Confirm the complete physical nameplate, current ABB documentation, compatible components and installed-system configuration before installation or replacement.
Apter Power 3BHE038368R0102 PCBA Splitter Board - Requested XZC827A102 Label Verification Manuals and Guides
Important Notice: The first link is the product-parameters PDF prepared only from the cited manufacturer information; the second link is the Apter Power product manual. Confirm the physical nameplate, current manufacturer documents, and host-system requirements before installation or replacement.
Exact-code large splitter-board replacement
Use only where an ABB host bill of materials explicitly calls for 3BHE038368R0102.
3MVA-described assembly service
Supports service of the assembly position described by ABB as large, 3MVA; the wording must not be converted into an unverified board electrical rating.
Documentation-controlled PCBA repair
Install only after the host drawings establish signal routing, connectors, companion boards, and safety steps.
Revision-controlled spare segregation
Keep 3BHE038368R0102 separate from other splitter-board and XZC revisions until ABB documentation proves any compatibility.
Read and follow the current ABB documentation and host-equipment instructions before work. Verify the complete physical nameplate and system configuration.
1
Do not publish XZC827A102 as ABB's verified type for 3BHE038368R0102 without a clear nameplate or exact ABB order record.
2
Do not interpret 3MVA as the board's rated apparent power or infer a host equipment family from that phrase alone.
3
Do not copy signals, protocols, channels, voltage, current, dimensions, or compatibility from XZC825A102 or XZC826A102.
4
Verify the exact host bill of materials, connectors, wiring, companion modules, and board revision before installation.
5
Use the host equipment's isolation, lockout, discharge, and ESD procedures.
Videos
News
Applications
