What is QUINT-PS/3AC/24DC/40?

QUINT-PS/3AC/24DC/40 is a three-phase 24 VDC 40 A QUINT POWER supply.

Which system uses QUINT-PS/3AC/24DC/40?

Use QUINT-PS/3AC/24DC/40 only in the manufacturer system and hardware arrangement stated in the technical parameters and installation notice on this page.

How do engineers confirm QUINT-PS/3AC/24DC/40 compatibility?

Match the complete QUINT-PS/3AC/24DC/40 label, hardware revision, host platform, companion hardware, connector and project configuration before replacement.

What should be checked before installing QUINT-PS/3AC/24DC/40?

Isolate energy, verify wiring and connector orientation, protect the hardware from ESD and compare every field connection with the approved drawing for QUINT-PS/3AC/24DC/40.

What commissioning test is required for QUINT-PS/3AC/24DC/40?

Restore power in a controlled sequence and verify status, diagnostics, channel or output response, alarms and the intended process function of QUINT-PS/3AC/24DC/40.

How should a technician troubleshoot QUINT-PS/3AC/24DC/40?

Record indicators, diagnostics, field measurements, configuration, companion hardware and the operating event before deciding whether QUINT-PS/3AC/24DC/40 is faulty.

Can QUINT-PS/3AC/24DC/40 replace a similar model directly?

Only after the complete catalog number, series or suffix, electrical rating, connectors, firmware and system compatibility have been compared.

What information should an RFQ for QUINT-PS/3AC/24DC/40 include?

Include QUINT-PS/3AC/24DC/40, quantity, complete nameplate photographs, hardware revision, installed system, companion hardware and required accessories.

What order number applies to QUINT-PS/3AC/24DC/40?

The product-specific value for QUINT-PS/3AC/24DC/40 is 2866802. Match it to the installed unit and application before work.

What input applies to QUINT-PS/3AC/24DC/40?

The product-specific value for QUINT-PS/3AC/24DC/40 is 3 x 400-500 VAC. Match it to the installed unit and application before work.

What input frequency applies to QUINT-PS/3AC/24DC/40?

The product-specific value for QUINT-PS/3AC/24DC/40 is 45-65 Hz. Match it to the installed unit and application before work.

What output applies to QUINT-PS/3AC/24DC/40?

The product-specific value for QUINT-PS/3AC/24DC/40 is 24 VDC, 40 A. Match it to the installed unit and application before work.

QUINT-PS/3AC/24DC/40

Name: QUINT-PS/3AC/24DC/40
Brand: Phoenix Contact
SKU: 2866802

three-phase 24 VDC 40 A QUINT POWER supply

Product image is representative; revision or series may vary. Contact us to request a specific version.

Product Describe：

Phoenix Contact QUINT-PS/3AC/24DC/40 2866802 is a three-phase DIN-rail power supply with 24 VDC, 40 A nominal output and 960 W rated output power.

Ask our team:

Phone: +86 180 3023 5313 E-Mail: sales13@apterpower.com

Dispatch Planning
Confirm stock and lead time with our team.

Dedicated Manager
Personalized one-to-one VIP service

ISO 9001:2015 Certified
Trusted quality management

Get a quick price for QUINT-PS/3AC/24DC/40

E-mail *

Mobile *

Company

Content *

Quantity *

Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Get a Quote

For more information on how your data is processed and stored by Apterpower please read our privacy policy

What happens after you enquire

1

Requirement review

We review the part number, quantity and delivery requirements and ask for any missing details.
2

Quotation and availability

We confirm the proposed item, condition, availability, price and estimated lead time in the quotation.
3

Order confirmation and dispatch

Once the quotation and purchasing details are agreed, your contact will coordinate the order and available dispatch information.

Technical specifications for QUINT-PS/3AC/24DC/40

Manufacturer:

Phoenix Contact
Product Category:

General Automation
Spare Part Number:

2866802
Estimated shipping dimensions:

4x13x13cm
Weight:

0.76 kg
Tariff Code:

8537101190
Counliy of origin:

Thailand
Order number:

2866802
Input:

3 x 400-500 VAC
Input frequency:

45-65 Hz
Output:

24 VDC, 40 A
Output adjustment:

18-29.5 VDC
Output power:

960 W
Power Boost:

45 A from -25 to 40 degrees C
SFB current:

215 A for 12 ms
Efficiency:

94 percent typical
Protection:

IP20

View as PDF Ask for Quote

Information

Overview Manuals Common Applications Product Precautions

Phoenix Contact QUINT-PS/3AC/24DC/40 is a QUINT POWER supply for industrial DC control systems.

Three-phase supply platform
Industrial DC control support
DIN-rail cabinet integration
QUINT POWER system compatibility

QUINT-PS/3AC/24DC/40 supplies the 24 VDC control-power distribution of the installed panel. Confirm DIN-rail mounting, protective-earth connection, three-phase input wiring, upstream protection, output distribution and load behavior before applying power to the connected equipment.

Important Notice: Confirm whether input protection, mounting accessories, redundancy parts, output wiring and system power components required for QUINT-PS/3AC/24DC/40 are included in the quotation or stock description.

Apter Power QUINT-PS/3AC/24DC/40 Manuals and Guides

Important Notice: These are two separate Apter Power documents independently prepared from manufacturer-published information. Confirm the physical nameplate, current manufacturer documents and installed-system requirements before configuration or installation. They do not replace manufacturer manuals.

QUINT-PS/3AC/24DC/40 installed-base maintenance

Supports like-for-like service of the documented three-phase 24 VDC 40 A QUINT POWER supply.

QUINT-PS/3AC/24DC/40 compatibility review

Checks host hardware, revision, companion components, wiring and configuration before replacement.

QUINT-PS/3AC/24DC/40 installation planning

Defines isolation, ESD, mounting, connection and parameter checks before field work.

QUINT-PS/3AC/24DC/40 commissioning

Supports controlled diagnostic, channel, communication or process-response checks after installation.

Read the applicable Phoenix Contact instructions before work. Verify QUINT-PS/3AC/24DC/40 and the installed-system configuration.

Verify model QUINT-PS/3AC/24DC/40 and the complete order code on the physical label before use.

Confirm order number 2866802, three-phase input, protective earth, upstream protection, conductor size, output setting and enclosure ventilation before energizing.

Match every QUINT-PS/3AC/24DC/40 connector, terminal, cable and companion assembly before moving field wiring.

Back up the applicable controller, monitor, HMI or I/O configuration before replacing QUINT-PS/3AC/24DC/40.

Isolate energy and follow the approved site safety procedure before handling QUINT-PS/3AC/24DC/40.

Follow ESD controls and protect QUINT-PS/3AC/24DC/40 connectors and printed-circuit assemblies during handling.

Do not transfer ratings or suffix meanings from a similar model to QUINT-PS/3AC/24DC/40.

After installing QUINT-PS/3AC/24DC/40, complete the relevant power, channel, link, diagnostic, alarm and fail-state checks.

Alternative Names

2866802

Technical notes

Confirm order number 2866802, three-phase input, protective earth, upstream protection, conductor size, output setting and enclosure ventilation before energizing.

FAQ View All FAQ

What is QUINT-PS/3AC/24DC/40?

QUINT-PS/3AC/24DC/40 is a three-phase 24 VDC 40 A QUINT POWER supply.
Which system uses QUINT-PS/3AC/24DC/40?

Use QUINT-PS/3AC/24DC/40 only in the manufacturer system and hardware arrangement stated in the technical parameters and installation notice on this page.
How do engineers confirm QUINT-PS/3AC/24DC/40 compatibility?

Match the complete QUINT-PS/3AC/24DC/40 label, hardware revision, host platform, companion hardware, connector and project configuration before replacement.
What should be checked before installing QUINT-PS/3AC/24DC/40?

Isolate energy, verify wiring and connector orientation, protect the hardware from ESD and compare every field connection with the approved drawing for QUINT-PS/3AC/24DC/40.
What commissioning test is required for QUINT-PS/3AC/24DC/40?

Restore power in a controlled sequence and verify status, diagnostics, channel or output response, alarms and the intended process function of QUINT-PS/3AC/24DC/40.
How should a technician troubleshoot QUINT-PS/3AC/24DC/40?

Record indicators, diagnostics, field measurements, configuration, companion hardware and the operating event before deciding whether QUINT-PS/3AC/24DC/40 is faulty.

Can QUINT-PS/3AC/24DC/40 replace a similar model directly?

Only after the complete catalog number, series or suffix, electrical rating, connectors, firmware and system compatibility have been compared.
What information should an RFQ for QUINT-PS/3AC/24DC/40 include?

Include QUINT-PS/3AC/24DC/40, quantity, complete nameplate photographs, hardware revision, installed system, companion hardware and required accessories.
What order number applies to QUINT-PS/3AC/24DC/40?

The product-specific value for QUINT-PS/3AC/24DC/40 is 2866802. Match it to the installed unit and application before work.
What input applies to QUINT-PS/3AC/24DC/40?

The product-specific value for QUINT-PS/3AC/24DC/40 is 3 x 400-500 VAC. Match it to the installed unit and application before work.
What input frequency applies to QUINT-PS/3AC/24DC/40?

The product-specific value for QUINT-PS/3AC/24DC/40 is 45-65 Hz. Match it to the installed unit and application before work.
What output applies to QUINT-PS/3AC/24DC/40?

The product-specific value for QUINT-PS/3AC/24DC/40 is 24 VDC, 40 A. Match it to the installed unit and application before work.

Manufacturers

Supporting new and legacy automation

Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.

Please try to be as accurate as possible with your search.
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
We can't find any results for “”.