Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for TC-501-01-4M5
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for TC-501-01-4M5
-
Manufacturer:ICS Triplex
-
Product Category:PLC Systems
-
Spare Part Number:TC-501-01-4M5
-
Estimated shipping dimensions:35x35x10cm
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
System Compatibility:Trusted TMR System
-
Standard Cable Length:4.5 Meters (14.7 Feet)
-
Revision Code:-01 (Standard electrical configuration)
-
Operating Temp:-5°C to +60°C
-
Safety Certification:Suitable for SIL 3 Safety Instrumented Systems
-
Hazardous Area:Certified for ATEX / IECEx Zone 2 installations
-
Connector A (Chassis):96-way High-Density DIN Connector (Male/Female depending on chassis version)
-
Weight:No exact net/device weight for TC-501-01-4M5 was confirmed in the reviewed official ICS Triplex manufacturer material. Verify the physical nameplate and current exact-model document before shipping.
-
Dimensions:No exact overall product dimensions for TC-501-01-4M5 were confirmed in the reviewed official ICS Triplex manufacturer material. Verify the physical unit and current exact-model drawing before mounting or shipping calculations.
Information
Overview
Manuals
Common Applications
Product Precautions
The TC-501-01-4M5 is a dedicated I/O interface cable for the ICS Triplex Trusted system, used to connect I/O modules to Field Termination Assemblies (FTA).It is responsible for transmitting signals processed by the I/O modules to the field wiring terminal boards, serving as the physical transmission link between the controller and field devices.
- 4.5-meter long-distance maneuverability
- SIL 3 high reliability
- Full Support for SmartSlot Redundancy
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
ICS Triplex TC-501-01-4M5 I/O SmartSlot Cable Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Oil & Gas Refining
It connects I/O modules to field terminals, ensuring safety commands shut down critical valves via reliable 4.5m links during pressure or temperature anomalies.
Nuclear Power Plants
It transmits status data for cooling systems and control rods; its LSZH material meets the extreme fire safety and cable integrity requirements of nuclear plants.
Gas Turbine Control
It transmits high-speed analog signals like bearing vibration and speed, ensuring the safety system trips in time before mechanical failure occurs.
Steel & Metallurgy
Its robust locking and 4.5m length allow the control chassis to be in a cleaner room while monitoring furnace parameters in harsh environments.
Semiconductor Specialty Gas Managements
It connects sampling modules across different zones and uses its SmartSlot compatibility to ensure monitoring never interrupts during I/O module replacement.
When using the TC-501-01-4M5 cable, strictly adhere to the minimum bend radius specifications to prevent damage to the multi-core signal wires within its 4.5m length. Due to the cable's significant weight, provide adequate strain relief support near the connectors and ensure locking screws at both ends are firmly secured to prevent loose contacts caused by industrial vibration. Additionally, maintain a safe distance from power cables to minimize EMI, and always verify physical connectivity and software status before performing SmartSlot redundancy maintenance to ensure signal continuity for the SIL 3 system.
FAQ View All FAQ
-
How to correctly install the TC-501-01-4M5?Plug one end into the I/O connector at the rear of the chassis and the other into the FTA board interface, ensuring the locking screws on both sides are tightened for a secure connection.
-
What role does TC-501-01-4M5 cable play in a SIL 3 system?As part of the safety loop, its high reliability and shielding performance ensure that safety data is not affected by electromagnetic interference during transmission, maintaining the overall safety of the system.
-
What physical constraints should be noted when using the TC-501-01-4M5?Due to its weight and multi-core conductors, the minimum bend radius specifications must be followed, and sufficient support should be provided during wiring to relieve strain on the connectors.
-
Does the TC-501-01-4M5 have explosion-proof certification?Yes, as part of the Trusted system, it complies with the installation requirements for ATEX/IECEx Zone 2 hazardous areas.
-
Why can't general cables replace the TC-501-01-4M5?Because the TC-501-01-4M5 uses proprietary multi-core shielding and high-density connectors, general cables cannot meet its electrical impedance and anti-interference standards.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.