ICS Triplex TC-001-02-1M5 is an evidence-bounded Trusted low-smoke zero-halogen power cable. Rockwell Automation's TC000 manual defines the TC-001-02 family and its xMx length-code format; the requested code represents 1.5 m.
- Requested part number: TC-001-02-1M5
- Cable length: 1.5 m
- Insulation code: 02 = low-smoke zero-halogen
- Documented role: chassis power cable from T8292 distribution to a controller or first expander chassis
System role: chassis power cable from T8292 distribution to a controller or first expander chassis Only facts stated by the cited Rockwell Automation material are published; sibling, successor and third-party data are not transferred. Architecture boundary: Use only between the exact Trusted distribution, chassis or fan connectors documented for this cable type and verify polarity before energization. Do not interchange TC-001, TC-003 and TC-011 functions; the 02 insulation code is LSZH and does not denote a generic cable. Before installation or replacement, verify the complete physical label, host equipment, companion hardware, wiring and approved commissioning procedure. Origin and HS code remain unpublished unless an exact manufacturer record or the physical package label establishes them.
Important Notice: Verify the complete ICS Triplex TC-001-02-1M5 physical label and installed-system documentation before use.
Apter Power TC-001-02-1M5 Manuals and Guides
Important Notice: The first link is the model-specific product-parameters PDF prepared only from the cited Rockwell Automation official evidence; the second link is the Apter Power product information manual. Confirm the physical nameplate, current Rockwell Automation documents, and host-system requirements before installation or replacement.
Installed-base maintenanceSupports evidence-led identification and replacement planning for ICS Triplex TC-001-02-1M5.
System documentationProvides a source-traceable boundary for the documented Trusted TC000 power-cable architecture configuration.
Commissioning reviewGuides identity, companion-hardware, wiring and controlled functional checks before return to service.
Migration assessmentSeparates exact-model facts from successor, sibling and family-level information.
Read and follow the exact Rockwell Automation documentation and host-equipment instructions before work. Verify the complete physical nameplate and system configuration.
1Verify the complete ICS Triplex TC-001-02-1M5 label, revision and installed-system documentation before use.
2Do not interchange TC-001, TC-003 and TC-011 functions; the 02 insulation code is LSZH and does not denote a generic cable.
3De-energize the equipment and follow the site's approved electrical and process-safety procedure before disturbing hardware or wiring.
4Back up controller, drive, network and configuration data before replacement, migration or firmware work.
5Verify every companion module, cable, connector, termination and power source from approved drawings.
6Do not copy electrical, communication, mechanical or lifecycle values from a related model or successor.
7Perform a documented functional test and confirm diagnostics, alarms and fail-state behavior after work.
8Origin and HS code remain unpublished unless an exact manufacturer record or the physical package label establishes them.
Videos
News
Applications
