The T9310-02 is an ICS Triplex AADvance 2 m Backplane Extender Cable for AADvance systems.
- 2 m backplane extender cable
- Designed for the AADvance architecture
- extends the backplane connection between approved AADvance base units when the engineered cabinet layout requires physical separation
- Model-specific compatible hardware: AADvance processor and I/O base units installed in the approved backplane-extension arrangement
It extends the backplane connection between approved AADvance base units when the engineered cabinet layout requires physical separation. It handles AADvance backplane interconnection between the matched processor and I/O base-unit arrangement and works with AADvance processor and I/O base units installed in the approved backplane-extension arrangement. For dependable operation, follow the official model-specific system matching, wiring, environmental and commissioning instructions.
Important Notice: Confirm the exact T9310-02 physical nameplate, hardware revision and controlled project record before installation or replacement.
Apter Power T9310-02 Manuals and Reference
Important Notice: These are original Apter Power reference documents based on the cited Rockwell Automation sources. Confirm the physical nameplate and current official documentation before use.
Separated AADvance base units
T9310-02 extends the backplane connection between approved AADvance base units when the engineered cabinet layout requires physical separation.
Redundant controller cabinets
T9310-02 AADvance backplane interconnection between the matched processor and I/O base-unit arrangement.
Backplane extension routes
T9310-02 extends the backplane connection between approved AADvance base units when the engineered cabinet layout requires physical separation.
Safety-system cabinet layouts
T9310-02 AADvance backplane interconnection between the matched processor and I/O base-unit arrangement.
Controlled spare replacement
T9310-02 extends the backplane connection between approved AADvance base units when the engineered cabinet layout requires physical separation.
Read Rockwell Automation AADvance Controller Troubleshooting and Maintenance Manual and the applicable system installation instructions before use. Verify the exact model, revision, slot or base, termination hardware and field wiring.
1
Confirm the complete T9310-02 code and the approved base-unit arrangement.
2
Route the cable without crushing, sharp bends or unsupported connector load.
3
Isolate controller power before connecting or disconnecting the backplane cable.
4
Keep both connectors fully seated and mechanically secured.
5
Complete processor, backplane and I/O diagnostics before returning the system to service.
Videos
News
Applications