Which installed system position is intended for IC697MEM717?

Install IC697MEM717 only in the documented GE Fanuc Series 90-70 memory position and compare the complete catalog marking with the approved hardware list.

What field signals or controlled function does IC697MEM717 handle?

Its documented role is battery-retained controller program and data memory; preserve the assigned channel, network or controller function during service.

Which companion hardware must be matched to IC697MEM717?

Match IC697MEM717 with IC697CPU771 or IC697CPU772 and IC697PCM711 where applicable, including the documented rack, cable and project identity.

Which electrical rating must be checked before wiring IC697MEM717?

Verify memory technology: Battery-backed CMOS RAM. Do not transfer limits from another catalog number.

What configuration should be recorded before replacing IC697MEM717?

Record the as-found position, conductors, addressing, firmware and software revision, then restore only the approved GE Fanuc Series 90-70 memory configuration.

Which isolation and handling controls apply to IC697MEM717?

Isolate all documented supply and field energy, use ESD controls and protect keyed connectors before handling IC697MEM717.

How should an engineer commission IC697MEM717?

Power up in a controlled sequence, review device and host diagnostics, then prove the intended cpu logic-memory expansion function.

Can IC697MEM717 replace a visually similar module without an engineering review?

No automatic substitution is assumed; compare the complete catalog number, interfaces, ratings and approved system revision.

General Electric IC697MEM717 Series 90-70 256 KB CMOS expansion memory

Name: IC697MEM717
Brand: General Electric
SKU: IC697MEM717

IC697MEM717

Series 90-70 256 KB CMOS expansion memory

In Stock

Ships by Wednesday, October 14

Fast Shipping Available

Technical specifications for IC697MEM717

Manufacturer:

General Electric

Product Category:

PLC Systems

Spare Part Number:

IC697MEM717

Estimated shipping dimensions:

4x21.8x29.3cm

Weight:

0.62 kg

Tariff Code:

8537101190

Counliy of origin:

USA

Memory capacity:

256 KB

Memory technology:

Battery-backed CMOS RAM

Compatible CPUs:

IC697CPU771; IC697CPU772

Compatible coprocessor:

IC697PCM711

Installation:

Daughterboard on host module

Additional rack slots:

Retention source:

Battery on host module

Error checking:

CPU checksum routine

Information

Overview Manuals Common Applications Product Precautions

General Electric IC697MEM717 is series 90-70 256 kb cmos expansion memory. It expands logic and data memory in compatible Series 90-70 CPUs or the programmable coprocessor without using another rack slot.

Adds 256 KB of CMOS memory
Mounts directly on the host module
Uses the host battery for retention
Supports CPU checksum error detection

IC697MEM717 operates with IC697CPU771 or IC697CPU772, IC697PCM711 where applicable, host-module battery, approved controller memory configuration.

Engineered applications include CPU logic-memory expansion, Data-table capacity increase, Programmable coprocessor storage, Memory daughterboard replacement.

Important Notice: Remove power, verify the host battery and discharge controls, protect daughterboard contacts from ESD, and restore the approved memory allocation.

Apter Power GE IC697MEM717 Manuals and Guides

Apter Power GE IC697MEM717 Product and System Technical Reference PDF Apter Power GE IC697MEM717 Installation and Commissioning Workbook PDF

The first document presents model-specific engineering data. The second provides a separate installation, connection, commissioning and acceptance workflow.

CPU logic-memory expansion

Expands installed controller program storage.

Data-table capacity increase

Adds data capacity without a rack slot.

Programmable coprocessor storage

Supports coprocessor storage requirements.

Memory daughterboard replacement

Restores retained memory after host-module service.

Read the applicable General Electric instructions before work. Verify IC697MEM717 and the installed GE Fanuc Series 90-70 memory configuration.

Verify the complete IC697MEM717 marking and its assigned GE Fanuc Series 90-70 memory position before work.

Place the connected cpu logic-memory expansion process in the approved maintenance state.

Isolate applicable power and battery-retained controller program and data memory field energy before disconnecting conductors.

Record connector, conductor, address, firmware and software identities before removal.

Use ESD controls and protect keyed interfaces, exposed contacts and electronic assemblies.

Confirm the installed IC697CPU771 or IC697CPU772 and IC697PCM711 where applicable against the approved project.

Restore power in a controlled sequence and review device, network and host diagnostics.

Prove the intended data-table capacity increase function and retain the final test result.

FAQS

Which installed system position is intended for IC697MEM717?

Install IC697MEM717 only in the documented GE Fanuc Series 90-70 memory position and compare the complete catalog marking with the approved hardware list.
What field signals or controlled function does IC697MEM717 handle?

Its documented role is battery-retained controller program and data memory; preserve the assigned channel, network or controller function during service.
Which companion hardware must be matched to IC697MEM717?

Match IC697MEM717 with IC697CPU771 or IC697CPU772 and IC697PCM711 where applicable, including the documented rack, cable and project identity.
Which electrical rating must be checked before wiring IC697MEM717?

Verify memory technology: Battery-backed CMOS RAM. Do not transfer limits from another catalog number.
What configuration should be recorded before replacing IC697MEM717?

Record the as-found position, conductors, addressing, firmware and software revision, then restore only the approved GE Fanuc Series 90-70 memory configuration.
Which isolation and handling controls apply to IC697MEM717?

Isolate all documented supply and field energy, use ESD controls and protect keyed connectors before handling IC697MEM717.
How should an engineer commission IC697MEM717?

Power up in a controlled sequence, review device and host diagnostics, then prove the intended cpu logic-memory expansion function.
Can IC697MEM717 replace a visually similar module without an engineering review?

No automatic substitution is assumed; compare the complete catalog number, interfaces, ratings and approved system revision.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

IC697MEM717

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for IC697MEM717

Technical specifications for IC697MEM717

Information

Information