Which PNP normally-open switching output is provided by IFM II5910?

A PNP normally-open switching output.

What nominal sensing range and operating distance apply to IFM II5910?

The nominal sensing range is 15 mm and the documented operating distance is 0 to 12.15 mm.

What M12 supply voltage and polarity checks are required for IFM II5910?

Provide 10 to 32 V DC with correct M12 polarity.

How much continuous output load can IFM II5910 switch?

The continuous switching-output rating is 200 mA.

What does the documented 100 Hz switching frequency mean for IFM II5910?

The documented DC switching frequency is 100 Hz.

Why must IFM II5910 be installed flush using its M30 x 1.5 threaded housing?

Install it flush using the M30 x 1.5 threaded housing.

Which IP67 and operating-temperature limits apply to IFM II5910?

Operate from -40 to 70 degC within IP67 protection conditions.

Which target-gap, LED and controller-input checks confirm commissioning of IFM II5910?

Verify target gap, yellow switching LEDs and the assigned controller input under controlled motion.

II5910

Name: II5910
Brand: IFM Electronic
SKU: II5910

II5910 Inductive Sensor

In Stock

Ships by Friday, October 9

Fast Shipping Available

Product Describe：

IFM II5910 is a flush-mountable M30 inductive sensor with a 15 mm sensing range and PNP normally-open switching output. It operates from 10 to 32 V DC and uses a gold-contact M12 connector.

Ask our team:

Phone:
+86 180 3023 5313
E-Mail:
sales13@apterpower.com

Get a quick price for： II5910

Quantity*

Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Get a Quote

For more information on how your data is processed and stored by Apterpower please read our privacy policy.

Technical specifications Information Alternative names Technical notes FAQ

Technical specifications for II5910

Manufacturer:

IFM Electronic
Product Category:

General Automation
Spare Part Number:

II5910
Estimated shipping dimensions:

7.5×3.0×3.0cm
Weight:

0.13 kg
Tariff Code:

8537101190
Counliy of origin:

Germany
Product type:

Inductive sensor
Type designation:

IIA3015BBPKG/US-104
Electrical design:

PNP
Output function:

Normally open
Sensing range:

15 mm
Real sensing range:

15 mm +/- 10%
Operating distance:

0 to 12.15 mm
Operating voltage:

10 to 32 V DC
Current consumption:

10 mA
Maximum output voltage drop:

2.5 V DC
Continuous output current:

200 mA
Switching frequency:

100 Hz
Reverse-polarity protection:

Yes
Short-circuit protection:

Yes, non-latching
Overload protection:

Yes
Ambient temperature:

-40 to 70 degC
Degree of protection:

IP67
Mounting:

Flush mountable
Thread designation:

M30 x 1.5
Tightening torque:

50 Nm
Connection:

M12 connector, A-coded, 3 gold-plated contacts
Switching indication:

4 yellow LEDs
EMC emission:

EN 55011 class B
MTTF:

1083 years

View as PDF Ask for Quote

Information

Overview Manuals Common Applications Product Precautions

IFM II5910 provides non-contact metal target detection with a PNP normally-open output for a documented IFM inductive sensors installation.

15 mm inductive sensing range
PNP normally-open switching output
10 to 32 V DC operation
IP67 flush-mountable M30 housing

The component remains matched to its documented host position, connections and approved configuration. Commissioning restores that architecture and verifies the intended function under controlled conditions.

Important Notice: Confirm II5910, its exact IFM inductive sensors role, installed position, power, interfaces, configuration, diagnostics and controlled acceptance evidence before release.

IFM II5910 Manuals & Downloads

These documents are different: the first consolidates exact product and system data; the second provides model-specific installation checks, commissioning steps and acceptance guidance.

Machine presence detection

Detects metal targets without mechanical contact at the documented switching distance.

Factory position confirmation

Provides a PNP normally-open signal to a compatible control input.

Conveyor and fixture sensing

Supports protected M30 mounting with the specified target clearance.

Sensor replacement commissioning

Restores polarity, gap, connector seating and controlled switching verification.

Read the applicable IFM installation instructions before work. Verify II5910, the installed host system and all configured field interfaces before isolation, wiring or commissioning.

Confirm the II5910 and IIA3015BBPKG/US-104 markings.

Place the machine and input channel in the approved maintenance state.

Isolate the 10 to 32 V DC sensor circuit before disconnection.

Record target material, sensing gap, connector pinout and input assignment.

Keep the sensor flush-mounted and within the 0 to 12.15 mm operating distance.

Tighten the M30 mounting hardware without exceeding 50 Nm.

Restore the M12 connection and review the four yellow switching LEDs.

Exercise the target under controlled conditions and verify the PLC input response.

Alternative Names

IIA3015BBPKG/US-104

Technical notes

Install II5910 only in the documented IFM inductive sensors position and preserve its exact wiring, interfaces and configuration. After controlled energization, verify diagnostics and non-contact metal target detection with a PNP normally-open output before service release.

FAQS

Which PNP normally-open switching output is provided by IFM II5910?

A PNP normally-open switching output.
What nominal sensing range and operating distance apply to IFM II5910?

The nominal sensing range is 15 mm and the documented operating distance is 0 to 12.15 mm.
What M12 supply voltage and polarity checks are required for IFM II5910?

Provide 10 to 32 V DC with correct M12 polarity.
How much continuous output load can IFM II5910 switch?

The continuous switching-output rating is 200 mA.
What does the documented 100 Hz switching frequency mean for IFM II5910?

The documented DC switching frequency is 100 Hz.
Why must IFM II5910 be installed flush using its M30 x 1.5 threaded housing?

Install it flush using the M30 x 1.5 threaded housing.
Which IP67 and operating-temperature limits apply to IFM II5910?

Operate from -40 to 70 degC within IP67 protection conditions.
Which target-gap, LED and controller-input checks confirm commissioning of IFM II5910?

Verify target gap, yellow switching LEDs and the assigned controller input under controlled motion.

Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>

Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Product Browsing History

II5910

Product Details >>

We’re Here When You Need Us

From product insights to customer service needs, our experienced service team will focus on getting you what you need quickly

Enquire

Complete our online form.

CONTACT >>

Call Us

Speak to one of our team.

CONTACT >>

Live Chat

Send us a message.

CONTACT >>

II5910