Technical specifications for 9200-01-05-10-00
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:9200-01-05-10-00
-
Estimated shipping dimensions:4x4x10.5cm
-
Weight:0.44 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Connector/Cable Option:Terminal block top mount
-
Mounting Base Option:Circular; M10X1 stud
-
Agency Approval Option:No Approvals
-
Coil Resistance:1.25 kΩ ±5%
-
Maximum Use Altitude:2000 m (6,561 ft) above sea level
-
Locked Coil Inductance:125 mH, typical
Information
- Exact requested identity: 9200-01-05-10-00
- Product class: configured 9200 two-wire Seismoprobe velocity transducer
- Mounting angle: 0 deg +/-2.5 deg
- Minimum operating frequency: 4.5 Hz (270 cpm)
System role: It is a 0-degree calibrated Seismoprobe with 4.5 Hz minimum operating frequency, terminal-block top mount, M10x1 circular mounting stud and no approval option. Only facts stated by the cited Baker Hughes / Bently Nevada material are published; sibling, successor and third-party data are not transferred. Architecture boundary: Apply the documented 10 kohm load, mounting orientation and compatible monitor input for a passive two-wire velocity measurement chain. The 00 suffix selects no approval; do not transfer approval claims or high-temperature 74712 specifications. Before installation or replacement, verify the complete physical label, host equipment, companion hardware, wiring and approved commissioning procedure. Origin and HS code remain unpublished unless an exact manufacturer record or the physical package label establishes them.
Apter Power 9200-01-05-10-00 Manuals and Guides
Important Notice: The first link is the model-specific product-parameters PDF prepared only from the cited Baker Hughes official evidence; the second link is the Apter Power product information manual. Confirm the physical nameplate, current Baker Hughes documents, and host-system requirements before installation or replacement.
Technical notes
FAQ View All FAQ
-
What is Bently Nevada 9200-01-05-10-00?It is an evidence-bounded configured 9200 two-wire Seismoprobe velocity transducer; this page is limited to the cited manufacturer evidence.
-
Is the exact identity verified?Verified Evidence Bounded.
-
What is its system role?It is a 0-degree calibrated Seismoprobe with 4.5 Hz minimum operating frequency, terminal-block top mount, M10x1 circular mounting stud and no approval option.
-
Which installed-base context is documented?Bently Nevada casing-vibration measurement.
-
Are related models automatic substitutes?No. A sibling, repair code, suffix or engineering replacement is not an unconditional drop-in approval.
-
Must the physical label be checked?Yes. Verify the model, revision, firmware and all order or configuration suffixes.
-
Are cables and companion hardware universal?No. Use only the exact companion hardware approved for the installed configuration.
-
Can it be changed while energized?No hot-swap claim is made; follow the manufacturer and site isolation procedures.
-
Are origin and HS code published?No. Both remain unpublished without exact manufacturer evidence for the requested full identity.
-
Is the current lifecycle phase published?Formal current lifecycle phase is not stated in the cited exact-model evidence.
-
Are dimensions and shipment weight published?Only exact manufacturer values stated in the page are published; all other logistics fields remain blank.
-
What must be tested after installation?Verify power, wiring, communication or I/O behavior, diagnostics, alarms and fail-state response.
Supporting new and legacy automation
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
Related cases and sourcing guidance
View all case studiesYou May Also Like
Product Browsing History
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.






