With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The 200150-14-05 is an industrial-grade low-frequency accelerometer manufactured by Bently Nevada, belonging to the Trendmaster machinery condition monitoring family. This sensor interfaces directly with the 200100 Dual Acceleration-to-Velocity flexiTIM module, the 89130-01 Transducer Interface Module (TIM), and the 1900/25 and 1900/27 machinery protection monitors.
Excellent Low-Frequency Response and High-Precision Sensing
Dual Hardware Configuration and Multiple Hazardous Area Certifications
High Resiliency Against Mechanical Shock and Full Hermetic Seal for Harsh Environments
The 200150 Accelerometer also operates with the Trendmaster 2000 system. The accelerometer interfaces with the 200100 Dual Acceleration to Velocity flexiTIM Module and the 89130-01 Acceleration-to-Velocity TIM (Transducer Interface Module), as well as the 1900/25 and 1900/27 monitors. The 200150-14-05 accelerometer, engineered for high-reliability monitoring in harsh environments, features a robust ceramic shear sensing element in a hermetically sealed 316L stainless steel enclosure. It provides 100 mV/g sensitivity for low-frequency vibration, combining an Option-14 3/8-24 UNF mount and Option-05 hazardous area certifications (CSA, ATEX, IECEx) to ensure secure, industrial-grade data transmission.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 200150-14-05 Accelerometers Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Oil & Gas
Installed on the bearing housings of large centrifugal pumps and gas compressors in refineries to monitor high-frequency abnormal vibrations, preventing catastrophic downtime caused by unbalance or misalignment.
Wind Power Generation
Deployed on the main shaft bearings and gearbox casings inside wind turbine nacelles to capture high-frequency vibration characteristics caused by early gear tooth fatigue wear and mechanical looseness.
Pulp & Paper Industry
Distributed across the dryer section roller bearing housings of paper machines, enabling centralized online vibration monitoring of hundreds of high-load bearings due to the vast number of production line nodes.
Pharmaceutical
Used for the online mechanical vibration status monitoring of cleanroom HVAC circulation fans and chiller screw compressors in pharmaceutical power utilities, ensuring continuous utility energy supply.
Cement & Mining Industries
Applied to the vibration monitoring of rotary kiln main drive systems, ball mills in cement plants, and large vibrating screen drive shafts in mines, achieving condition monitoring in extremely dusty environments.
When operating the 200150-14-05 accelerometer, you must utilize a torque wrench to strictly maintain the fastening torque of the mounting stud between 2.7 and 6.8 N·m to prevent thread stripping from over-tightening or poor low-frequency vibration transmission from under-tightening. Ensure the top-mounted 5-pin electrical connector and shielded cable are securely locked, and maintain the minimum bend radius of the cable to prevent internal conductor breakage. While operating in hazardous locations, you must rigidly follow the intrinsically safe and explosion-proof regulations specified by its Option-05 certifications (CSA, ATEX, and IECEx), preventing open circuits under power and eliminating industrial stray electromagnetic interference caused by inadequate housing grounding.
What exactly is the 200150-14-05 (200155-14-05) device?
It is an industrial-grade low frequency accelerometer manufactured by Bently Nevada, belonging to the Trendmaster Pro monitoring system family, and is specifically engineered to capture vibration data from industrial machinery.
What is the core operating principle inside the 200150-14-05?
It contains an internal ceramic shear piezoelectric sensing element that generates an electrical charge when subjected to mechanical vibration parallel to its sensitive axis, which is then electronically converted into a proportional voltage output signal.
In which industrial scenarios is the 200150-14-05 most commonly applied?
Due to its excellent low-frequency response traits, it is most suited for online vibration condition monitoring of Fin-Fans (air-cooled heat exchangers), slow-rotating shafts (below 10 Hz), and other low-speed heavy industrial machinery.
What is the optimal frequency response range for the 200150-14-05 during use?
The frequency range of this sensor (within ±10% limits) covers 1.5 to 10,000 Hz (or 90 to 600,000 cpm), and it is officially recommended for monitoring target low-frequency faults below 10 Hz.
How to physically mount the 200150-14-05 onto a machine surface?
First clean and drill a hole on the machine surface, thread the included Option-14 stud (3/8-24 UNF) into the sensor's bottom 3/8-24 threaded hole, and then securely tighten the other end onto the machine measurement point.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
