Get a quick price for 330980-50-CN
For more information on how your data is processed and stored by Apterpower please read our privacy policy
-
Match the complete marking
Compare 330980-50-CN with the installed sensor, chain and applicable Bently Nevada NSv documentation.
-
Check the offered item before ordering
Request photos of 330980-50-CN, terminals, mounting pad and nameplate; compare them with the installed sensor and Bently Nevada documentation.
Technical specifications for 330980-50-CN
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330980-50-CN
-
Weight:0.26 kg
-
Tariff Code:8537101190
-
Sensor family:330980 3300 XL NSv Proximitor Sensor
-
System length:50: 5.0 m (16.4 ft)
-
Mounting:50: panel mount
-
Agency option:CN country-specific suffix; verify offered label
-
System input:One 3300 RAM or 3300 NSv probe and extension cable
-
Matched-system scale factor:7.87 V/mm (200 mV/mil)
-
Matched-system linear range:1.5 mm (60 mil); approximately 0.25 to 1.75 mm gap
-
Recommended gap setting:1.0 mm (40 mil)
-
Matched-system frequency response:0 to 10 kHz, +0/-3 dB typical; up to 305 m field wiring
-
Minimum flat target:8.9 mm (0.35 in); 13 mm (0.5 in) recommended
-
Minimum radial shaft diameter:20 mm (0.8 in); 30 mm (1.2 in) recommended
-
System supply:-17.5 to -26 Vdc without barriers; 12 mA maximum
-
Sensor output resistance:50 ohm
-
Probe cable impedance:75 ohm coaxial
-
Probe tip material:Polyphenylene sulfide (PPS)
-
Probe case material:AISI 304 stainless steel
-
Field wiring:0.2 to 1.5 mm2 (16 to 24 AWG)
-
Maximum field wiring:305 m (1,000 ft)
-
Sensor material:A380 aluminum
-
Matched-system scale factor:7.87 V/mm (200 mV/mil)
-
Matched-system linear range:1.5 mm (60 mil); approximately 0.25 to 1.75 mm gap
-
Recommended gap setting:1.0 mm (40 mil)
-
Matched-system frequency response:0 to 10 kHz, +0/-3 dB typical; up to 305 m field wiring
-
Minimum flat target:8.9 mm (0.35 in); 13 mm (0.5 in) recommended
-
Minimum radial shaft diameter:20 mm (0.8 in); 30 mm (1.2 in) recommended
-
System supply:-17.5 to -26 Vdc without barriers; 12 mA maximum
-
Sensor output resistance:50 ohm
-
Probe cable impedance:75 ohm coaxial
-
Probe tip material:Polyphenylene sulfide (PPS)
-
Probe case material:AISI 304 stainless steel
Information
Overview
Downloads
Applications / Compatibility
Product Precautions
- The sensor conditions the signal from a matched 3300 NSv probe and extension cable for the monitor input.
System length: 50 specifies a 5.0 m matched chain
Mounting: panel-mount execution
Calibration boundary: confirm target material and actual CN marking
Mounting: panel-mount execution
Calibration boundary: confirm target material and actual CN marking
The 50 option selects a 5.0 m total probe-and-extension electrical length and panel mounting. Compare the sensor label, mounting pad, terminal layout and installed chain before replacement.
NSv system performance is specified for a matched probe, extension cable and sensor. The probe lead plus extension cable must total 5.0 m; an incorrect combination can shift scale and gap indication even when the connectors mate.
The CN suffix is a country-specific option whose exact approval scope must be verified on the offered nameplate. Record supply, target material, static gap and controlled channel response before final acceptance.
NSv system performance is specified for a matched probe, extension cable and sensor. The probe lead plus extension cable must total 5.0 m; an incorrect combination can shift scale and gap indication even when the connectors mate.
The CN suffix is a country-specific option whose exact approval scope must be verified on the offered nameplate. Record supply, target material, static gap and controlled channel response before final acceptance.
Controller platform reference: Bently Nevada 3300 XL NSv Proximity Transducer System. Use a 5.0 m matched probe-and-cable electrical length.
The verified Bently Nevada reference excerpt covers the applicable system, ordering family and technical interfaces for 330980-50-CN. The Apter Power guide adds exact-code checks, installation planning, diagnostics and acceptance steps.
-
330980-50-CN Official Bently Nevada Reference Excerpt
Original manufacturer pages - PDF, 5 pages. Applicable system data, order-code context, interfaces and technical drawings. -
330980-50-CN Installation & Commissioning Guide
Apter Power engineering guide - PDF, 5 pages. Exact configuration review, safe-work boundaries, replacement sequence, diagnostics and handover record.
Use the applicable Bently Nevada system documentation and the site-approved installation procedure for 330980-50-CN.
System position: The sensor is the electronic endpoint of a 5.0 m matched NSv probe-and-cable chain.
Compatibility boundary: Match system length, panel mount, target calibration, wiring and approval marking.
Compatibility boundary: Match system length, panel mount, target calibration, wiring and approval marking.
-
Panel-mounted sensor replacement
Match the pad, terminals, enclosure clearance and cable route. -
Five-metre NSv chain
Confirm probe plus extension cable equals 5.0 m. -
Monitor-channel interface
Verify supply, output wiring and channel configuration from the installed drawing. -
Controlled return to service
Record static gap and dynamic response against the approved baseline.
Prepare Bently Nevada 330980-50-CN using the applicable installation instructions and site isolation procedure.
Read the full sensor code
Match 330980-50-CN, system length and approval marking.
Check the complete chain
Confirm the probe and extension cable total 5.0 m.
Verify panel mounting
Compare pad, fixing, terminal clearance and enclosure grounding.
Protect terminals
Restore wiring and shield ownership from the as-found record.
Confirm target calibration
Check actual target material and installed gap procedure.
Prove the channel
Record supply, static output and controlled monitored response.
Alternative Names
3300 XL NSv Proximitor Sensor, complete order code 330980-50-CN
Bently Nevada 330980 50 CN complete configuration
Technical notes
Evidence boundary: The source establishes the 330980 sensor family, 50 option and NSv system values. System matching: Performance values apply to a complete matched NSv chain and stated target conditions. Pre-purchase check: Confirm label, panel mount, terminals, calibration and CN marking.
FAQ View All FAQ
-
How is the 5.0 m chain for 330980-50-CN assembled?The integral probe lead plus the extension cable must equal the sensor 5.0 m system length.
-
Why can 330980-50-CN show a shifted gap after replacement?An unmatched electrical length, target material, wiring or channel setting can change the indication.
-
What panel-mount checks are required for 330980-50-CN?Compare the pad, fixing points, terminal access, enclosure grounding and cable route.
-
What supply range applies to the matched 330980-50-CN system?The NSv family requires -17.5 to -26 Vdc without barriers at 12 mA maximum; confirm the installed barrier arrangement.
-
How should the static gap for 330980-50-CN be accepted?Use the approved target position and verify the 1.0 mm recommended-gap reference together with the monitor record.
-
Can 330980-50-CN be mixed with an 8 mm XL probe family?Do not assume cross-family compatibility; verify that every component is identified for the NSv system.
-
How should the CN suffix on 330980-50-CN be verified?Use the actual nameplate and applicable approval record for the offered unit.
-
What handover evidence is needed for 330980-50-CN?Retain full chain codes, mounting and terminal photos, supply, gap and controlled channel result.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.







