Speak to a sourcing specialist
sales13@apterpower.com

84661-25

Velomitor Armored Interconnection Cable
Product image is representative; revision or series may vary. Contact us to request a specific version.

Product Describe:

Bently Nevada 84661-25 is a 25 ft armored interconnection cable for the 330500 Velomitor piezo-velocity sensor and compatible monitor wiring.
  • Manufacturer part number
    84661-25
  • Shipping
    Swift global dispatch
  • Condition
    New, original product
  • Shipping size (est.)
    30cm x 30cm x 3cm
  • Country of Origin
    USA
Get a quick price for 84661-25
E-mail *
Mobile
Company
Content *
Quantity *
Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
For more information on how your data is processed and stored by Apterpower please read our privacy policy

What happens after you enquire

  • 0

    Review your reference

    Send the complete 84661-25 marking and installed-system identifiers for technical review.

  • 1

    Confirm the offer

    Review the exact offered unit, included items, condition and quantity in the quotation.

  • 2

    Arrange dispatch

    Confirm the accepted quantity and destination so dispatch can be arranged.

  • Match the complete marking

    Compare 84661-25 with the installed cable and applicable Bently Nevada 330500 documentation.

  • Check the offered item before ordering

    Request photos of 84661-25, connector, armor and terminal lugs; compare them with the installed cable and Bently Nevada documentation.

Technical specifications for 84661-25

  • Manufacturer:
    Bently Nevada
  • Product Category:
    Machinery Monitoring Systems
  • Spare Part Number:
    84661-25
  • Weight:
    0.66 kg
  • Tariff Code:
    8537101190
  • Cable family:
    84661 armored interconnection cable
  • Ordered length:
    25 ft (approximately 7.6 m)
  • Conductors:
    Two-conductor, twisted, shielded
  • Conductor size:
    22 AWG
  • Mechanical protection:
    Armored cable
  • Sensor-end connector:
    Two-socket moisture-resistant female connector
  • Field end:
    Terminal lugs
  • Intended sensor interface:
    330500 Velomitor piezo-velocity sensor
  • Use boundary:
    Used with monitors
  • Housing boundary:
    Not for 21128 Velocity Transducer Housing
  • Family minimum length:
    3 ft (0.9 m)
  • Family maximum length:
    96 ft (29 m)

Information

Overview Downloads Applications / Compatibility Product Precautions
  • This cable carries the two-wire Velomitor signal between the 330500 sensor and monitoring terminals.
Ordered length: 25 ft (approximately 7.6 m)
Construction: two-conductor, twisted, shielded 22 AWG armored cable
Interface: moisture-resistant two-socket connector to terminal lugs
The 84661 base number identifies a two-conductor, twisted, shielded 22 AWG armored cable with a moisture-resistant two-socket female connector at the sensor end and terminal lugs at the field end. The 25 suffix selects 25 ft, approximately 7.6 m.

This cable is listed for the 330500 Velomitor sensor and monitor wiring. The manufacturer table excludes it from the 21128 Velocity Transducer Housing arrangement, so confirm the installed sensor connector and mechanical housing before selection.

Record conductor and shield termination, armor condition and the original route before removal. After fitting, verify continuity, insulation and the controlled velocity channel response; continuity alone does not prove polarity or monitor configuration.
Controller platform reference: Bently Nevada 330500 Velomitor piezo-velocity sensor system. Match the two-socket sensor interface and field termination.
The verified Bently Nevada reference excerpt covers the applicable system, ordering family and technical interfaces for 84661-25. The Apter Power guide adds exact-code checks, installation planning, diagnostics and acceptance steps.
Use the applicable Bently Nevada system documentation and the site-approved installation procedure for 84661-25.
Prepare Bently Nevada 84661-25 using the applicable installation instructions and site isolation procedure.
Verify the full cable reference

Confirm 84661-25 and 25 ft length on the offered label.

Check sensor interface

Match the two-socket female connector to the installed 330500 sensor.

Do not use with 21128 housing

The manufacturer table identifies a different cable for that housing arrangement.

Inspect armor and route

Check bends, crushing, abrasion and transition points.

Preserve terminal mapping

Record both conductors, shield and terminal lugs before removal.

Prove the monitored channel

Verify polarity and controlled velocity response after reconnection.

Alternative Names

Velomitor armored interconnection cable, complete order code 84661-25 Bently Nevada 84661 25 complete cable configuration

Technical notes

Evidence boundary: The source directly identifies the 84661 cable family, construction, length code and housing exclusion. System matching: Sensor electrical performance is not assigned as a loose-cable rating. Pre-purchase check: Confirm connector, 25 ft length, armor, terminal lugs and installed sensor interface.

FAQ View All FAQ

  • What length does the 25 suffix in 84661-25 specify?
    It selects a 25 ft cable, approximately 7.6 m.
  • What conductor construction is used by 84661-25?
    It is a two-conductor, twisted, shielded 22 AWG armored cable.
  • What connector is fitted to 84661-25?
    The sensor end uses a moisture-resistant two-socket female connector; the field end uses terminal lugs.
  • Can 84661-25 be used with a 21128 Velocity Transducer Housing?
    No. The manufacturer table excludes 84661 cables from that housing arrangement.
  • How should polarity be preserved when replacing 84661-25?
    Record both conductor destinations, shield and terminal lugs before disconnecting the old cable.
  • What physical damage should be checked on 84661-25?
    Inspect armor, connector transition, lugs, bends, abrasion and crushing along the full route.
  • Why is continuity alone insufficient to accept 84661-25?
    Continuity does not prove polarity, shield termination, sensor seating or monitor response.
  • What handover record is needed after installing 84661-25?
    Keep the cable label, sensor identity, terminal map, route photos and controlled channel result.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
  • Whatsapp: +86 18030235313

    Send us a message.
  • sales13@apterpower.com

    Complete our online form.
  • +86 18030235313

    Speak to our team in your native language.