Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 330909-00-99-10-02-00
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 330909-00-99-10-02-00
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330909-00-99-10-02-00
-
Estimated shipping dimensions:1.5x1.3x118cm
-
Weight:0.18 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Probe body thread:3/8-24 UNF
-
Mechanical protection:Flexible stainless-steel armor
-
Unthreaded length:0.0 in
-
Overall case length:9.9 in
-
Integral lead length:1.0 m
-
Connector execution:ClickLoc without protector
-
Linear range:1.5 mm
-
Recommended gap:1.0 mm
-
Scale factor:7.87 V/mm, +12.5/-20%
-
Frequency response:0 to 10 kHz, +0/-3 dB
-
Minimum flat target:8.9 mm diameter
-
Recommended target:13 mm diameter
-
Maximum field wiring:305 m
Information
Overview
Manuals
Common Applications
Product Precautions
Bently Nevada 330909-00-99-10-02-00 is an armored 3300 XL NSv proximity probe with a long threaded case. It senses shaft displacement for a matched NSv Proximitor Sensor and monitor input.
- Measures displacement where limited target area restricts probe size
- Provides a 1.5 mm matched-system linear range
- Uses a long threaded case for deep mounting geometry
- Carries the signal through an armored one-metre lead
330909-00-99-10-02-00 installs with 3300 XL NSv Proximitor Sensor, 330930 extension cable when required, compatible monitor channel, small-diameter steel target in an engineered 3300 XL NSv Proximity Transducer System configuration.
The commissioning workflow covers installed-hardware matching, controlled start-up and functional verification for this 3300 xl nsv proximity probe.
Important Notice: Confirm the complete 330909-00-99-10-02-00 marking, installed-system configuration, field connections and controlled functional test before commissioning or replacement.
Apter Power 330909-00-99-10-02-00 Manuals and Guides
Apter Power 330909-00-99-10-02-00 Product Technical Reference PDFBently Nevada 330909-00-99-10-02-00 Official Manual PDF
The first document is an Apter Power model-specific technical reference. The second supports model-specific installation, configuration and engineering verification.
Small-shaft radial vibrationMeasures displacement where limited target area restricts probe size
Tight-clearance axial positionProvides a 1.5 mm matched-system linear range
Compact bearing-housing measurementsUses a long threaded case for deep mounting geometry
Machine shaft centerline trendingCarries the signal through an armored one-metre lead
Read the applicable Bently Nevada installation instructions before work. Verify 330909-00-99-10-02-00 and the installed 3300 XL NSv Proximity Transducer System configuration.
1Verify 330909-00-99-10-02-00 and its 9.9-inch case before insertion.
2Secure the rotor and place the protection channel in maintenance state.
3Protect the small NSv tip and 3/8-24 UNF thread.
4Confirm insertion depth and full shaft clearance before tightening.
5Maintain published separation from adjacent probes to prevent crosstalk.
6Support the armored lead and keep the ClickLoc connection clean.
7Match probe and extension cable to the NSv Proximitor system length.
8Verify gap, polarity, vibration response, and alarms before service.
Technical notes
Confirm the deep-mount 9.9-inch case does not contact rotating hardware, maintain NSv probe-spacing rules, match total cable length, and verify the 1.0 mm static gap.
FAQ View All FAQ
-
Which installed hardware must be matched before fitting 330909-00-99-10-02-00?Match the complete 330909-00-99-10-02-00 marking to 3300 XL NSv Proximitor Sensor and 330930 extension cable when required, then confirm the assigned 3300 XL NSv Proximity Transducer System position and approved system configuration.
-
How should the field connections for 330909-00-99-10-02-00 be recorded before replacement?Record terminal or connector identity, polarity, shield, cable tag, channel assignment, and the as-found diagnostic state before disconnecting 330909-00-99-10-02-00.
-
What isolation is required before installing 330909-00-99-10-02-00?Place small-shaft radial vibration in the approved maintenance state, isolate every applicable power, signal, and stored-energy source, and prove the work area safe.
-
Which configuration check is essential when commissioning 330909-00-99-10-02-00?Restore only the approved model-specific channel, range, address, scale, or interface settings and compare them with the physical installation before enabling the process function.
-
How can an engineer function-test 330909-00-99-10-02-00 after installation?Apply a controlled input, reference, or limited output appropriate to 3300 xl nsv proximity probe, observe the system indication and diagnostics, and confirm the intended process response.
-
What should be checked if 330909-00-99-10-02-00 reports an unstable or incorrect value?Check seating, supply, grounding, shielding, matched components, mechanical installation, and the signal path before changing configuration or replacing additional hardware.
-
Can 330909-00-99-10-02-00 be replaced by a visually similar model without review?No. Verify the complete part number, electrical execution, connector arrangement, companion hardware, and approved software or rack configuration.
-
What commissioning evidence should be retained for 330909-00-99-10-02-00?Retain the full 330909-00-99-10-02-00 identity, as-left wiring and settings, measured functional-test results, final diagnostics, and authorization to return the affected equipment to service.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.