Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for RS900106-05-30-05-02-00
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for RS900106-05-30-05-02-00
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:RS900106-05-30-05-02-00
-
Estimated shipping dimensions:64x1.3x1cm
-
Weight:0.04 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Probe family:3300 XL 8 mm
-
Mounting form:Reverse mount
-
Case thread:M10 x 1
-
Unthreaded length:5 mm
-
Case length:30 mm
-
Total probe length:0.5 m
-
Connector:Miniature ClickLoc coaxial connector
-
Approval option:No agency approval option selected
-
Matched-system scale factor:7.87 V/mm (200 mV/mil) nominal
-
Matched-system linear range:2.0 mm (80 mil) typical
-
Reference target:AISI 4140 steel
Information
Overview
Manuals
Common Applications
Product Precautions
Within a matched 3300 XL 8 mm transducer chain, Bently Nevada RS900106-05-30-05-02-00 places the short reverse-mount probe at the machine while the extension cable and Proximitor Sensor complete the measurement path.
- RS900106-05-30-05-02-00
- 330106-05-30-05-02-00
- 3300 XL 8 mm
- Reverse mount
Retain the exact host position, connections and configuration record. Complete controlled diagnostics and a functional test before service release.
Important Notice: Confirm RS900106-05-30-05-02-00, every companion marking and the recorded acceptance result before replacement.
Bently Nevada RS900106-05-30-05-02-00 Manuals & Downloads
Bently Nevada RS900106-05-30-05-02-00 Official Datasheet Excerpt (PDF)Bently Nevada RS900106-05-30-05-02-00 Installation & Commissioning Guide (PDF)
The first PDF is an unchanged technical excerpt from the applicable manufacturer publication; the second provides a separate installation, verification and handover workflow.
Compact reverse-mount positions
Uses the 5 mm tip extension and 30 mm M10 case where the machine geometry requires a short probe body.
Relative shaft vibration
Measures dynamic shaft motion through the matched 3300 XL 8 mm signal chain.
Axial displacement
Tracks static shaft position when the probe gap and target geometry follow the machine design.
Speed or phase reference
Supports Keyphasor or speed service when installed against the configured shaft event.
Read the applicable product and site instructions before work. Verify RS900106-05-30-05-02-00, the installed host and every connected interface before isolation or replacement.
1
Confirm the complete RS900106-05-30-05-02-00 marking and the 330106 reverse-mount probe identity.
2
Verify the 5 mm unthreaded length, 30 mm case and M10 x 1 mounting geometry before removal.
3
Match the 0.5 m probe lead with the extension cable and Proximitor Sensor for the complete system length.
4
Protect the miniature ClickLoc connector, probe tip and 75 ohm cable from contamination and strain.
5
Record mounting depth, operating gap, cable route, shield treatment and receiving channel before work.
6
Install without twisting the cable or exceeding the approved thread engagement and bend radius.
7
Set the operating gap against the approved target with the monitoring path in maintenance mode.
8
Verify static gap, dynamic response, alarm path and configured speed or phase reference before release.
Technical notes
Match RS900106-05-30-05-02-00 to the complete installed identity, host position and companion hardware. Preserve every connection and setting; release only after diagnostics and a controlled test of compact reverse-mount shaft position and vibration sensing.
FAQ View All FAQ
-
Which probe geometry identifies Bently Nevada RS900106-05-30-05-02-00?It uses the 330106 reverse-mount geometry with an 8 mm tip and M10 x 1 threaded case.
-
What are the tip and case lengths of Bently Nevada RS900106-05-30-05-02-00?The referenced execution has a 5 mm unthreaded length and a 30 mm case length.
-
What probe lead length applies to Bently Nevada RS900106-05-30-05-02-00?The referenced 05 total-length option is 0.5 m.
-
Which connector is used by Bently Nevada RS900106-05-30-05-02-00?The 02 connector option is a miniature ClickLoc coaxial connector.
-
Which approval option applies to Bently Nevada RS900106-05-30-05-02-00?The final 00 option specifies that an agency approval option is not selected.
-
What matched components are required for Bently Nevada RS900106-05-30-05-02-00?Use the probe with the extension cable and Proximitor Sensor selected for the same complete system length.
-
What scale factor applies to the matched system for Bently Nevada RS900106-05-30-05-02-00?The standard 3300 XL 8 mm system uses 7.87 V/mm (200 mV/mil) nominal.
-
What should be tested after fitting Bently Nevada RS900106-05-30-05-02-00?Check operating gap, connector and cable condition, signal response, alarms and the assigned speed, phase or position function.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.